• Title/Summary/Keyword: 비저항이

Search Result 5,036, Processing Time 0.032 seconds

Magnetoresistance Effect of Ta/NiFe/Cu/Co Pseudo Spin Valve Structure (Ta/NiFe/Cu/Co Pseudo 스핀밸브 구조의 자기저항 효과)

  • Joo, Ho-Wan;Choi, Jin-Hyup;Choi, Sang-Dae;Lee, Ky-Am
    • Journal of the Korean Magnetics Society
    • /
    • v.14 no.1
    • /
    • pp.25-28
    • /
    • 2004
  • The dependence of sensitivity, MR ratio, coercivity (Hc) and switching fields as a function of thickness of each magnetic layers(Co, NiFe and Cu) were investigated in pseudo spin valves with a structure of Ta/NiFe/Cu/Co. As measured results dependence of the thickness of each magnetic layer, we obtained MR ratio of 7.26% for Ta(4 nm)/NiFe(7.5 nm)/Cu(3 nm)/Co(5 nm) pseudo spin valves. Also, we could control properties of magnetoresistance for independent magnetization courses of each magnetic layer. Especially, we found that we could control coercivity as constant MR ratio dependence of Co thickness.

지하공동 모델의 전기비저항 특성에 관한 실험적 연구

  • Park, Gap-Jin;Kim, Hyeon-Su;Kim, Hyeon-Seung;Song, Yeong-Su
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2009.10a
    • /
    • pp.93-98
    • /
    • 2009
  • Comprehension of physical properties distribution of underground cavity must be made primarily to show the clear image of the state of the cavity. A physical scale model experiment is executed assuming that underground cavity in filled with air or water of different ratio. The state of cavity wall is considered wet. Cavity model is made of agar. As a experimental result, even if the cavity wall is wet, high air and water ratio cavity shows high anomaly.

  • PDF

Electrical Resistivity Investigation at a Wastes Disposal Site (전기비저항 탐사를 이용한 매립지 안정화 조사)

  • Ha, Hee-Sang;Jung, Yun-Mun
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2000.09a
    • /
    • pp.70-86
    • /
    • 2000
  • The primary objective of this study is to develope an investigating method to identify spatial variability of plumes and contaminants at contaminated sites. The electrical resistivity method was used to characterize contaminated sites. This technique is expected to use actively at contaminated sites in order to remedy the contaminated sites in the future. It was studied by appling electrical resistivity method into contaminated wastes disposal sites and verified that it was suitable method for the contaminated site characterization.

  • PDF

Magnetoresistance Effect of [Pd/Co] Spin-valve with Perpendicular Anisotropy (수직자기이방성을 갖는 [Pd/Co] Spin Valve 구조에서 자기저항효과)

  • Choi, Jin-Hyup;Lee, Ky-Am
    • Journal of the Korean Magnetics Society
    • /
    • v.16 no.3
    • /
    • pp.173-177
    • /
    • 2006
  • We have investigated the magnetoresistance (MR) effect of the spin valve structures composed of perpendicularly magnetized Pd/Co multilayers, with changing the space layer (Pd or Cu) thickness, the stacking number of the Pd/Co multilayers, and the Co insertion-layer thickness. The Cu space layer showed larger MR ratio than the Pd space layer. The Co insertion-layer between Cu layer and pinned layer enhanced the MR ratio about three times. The maximum MR ratio of 7.4 % was established in the sample with the Co insertion-layer thickness of 0.62 and 1.01 nm.

Interpretation of Finite HMD Source EM Data using Cagniard Impedance (Cagniard 임피던스를 이용한 수평 자기쌍극자 송신원 전자탐사 자료의 해석)

  • Kwon Hyoung-Seok;Song Yoonho;Seol Soon-Jee;Son Jeong-Sul;Suh Jung-Hee
    • Geophysics and Geophysical Exploration
    • /
    • v.5 no.2
    • /
    • pp.108-117
    • /
    • 2002
  • We have introduced a new approach to obtain the conductivity information of subsurface using Cagniard impedance over two-dimensional (2-D) model in the presence of horizontal magnetic dipole source with the frequency range of $1\;kHz\~1\;MHz$. Firstly, we designed the method to calculate the apparent resistivity from the ratio between horizontal electric and magnetic fields, Cagniard impedance, considering the source effects when the plane wave assumption is failed in finite source EM problem, and applied it to several numerical models such as homogeneous half-space or layered-earth model. It successfully provided subsurface information even though it is still rough, while the one with plane wave assumption is hard to give useful information. Next, through analyzing Cagniard impedance and apparent resistivity considering source effect over 2-D models containing conductive- or resistive-block, we showed that the possibility of obtaining conductivities of background media and anomaly using this approach. In addition, the apparent resistivity considering source effect and phase pseudosections constructed from Cagniard impedance over the isolated conductive- and resistive block model well demonstrated outlines of anomalies and conductivity distribution even though there were some distortions came from sidelobes caused by 2-D body.

Electrical Properties of B-doped ZnO Thin Films deposited by Plasma Enhanced Chemical Vapor Deposition (플라즈마 화학기상 증착법에 의해 증착된 B이 첨가된 ZnO 박막의 전기적 특성)

  • 최준영;조해석;김영진;이용의;김형준
    • Journal of the Korean Vacuum Society
    • /
    • v.4 no.1
    • /
    • pp.85-90
    • /
    • 1995
  • 본 연구에서는 투명 전극으로의 응용을 목적으로 PECVD법에 의해 증착된 B이 첨가된 ZnO 박막의 전기 및 광학적 특성을 살펴보았다. B을 첨가하지 않은 ZnO 박막은 비저항이 수 $\Omega$-cm 정도의 값을 가지고 있었으며 시간에 따른 비저항의 변화가 컸으나, 2% B2H6을 5-16sccm의 유량범위에서 첨가한 경우에는 5-9X10-2 $\Omega$-cm의 비저항을 가지고 시간 경과에 따른 비저항의 변화가 아주 작은 ZnO 박막을 얻을 수 있었다. Van der Pauw법에 의한 Hall 계수의 측정 결과에 의하면, B을 첨가하지 않은 ZnO 박막의 전자 농도는 1017/㎤정도였으나 B을 첨가함으로써 최고 1020/㎤까지 증가하였다. 그러나 B이 첨가되기 전에는 박막의 전하 나르게 이동도가 $4extrm{cm}^2$/V.sec 이었으나, B참가에 의해 $0.7\textrm{cm}^2$/V.sec 이하로 감소하였다. B을 첨가한 경우와 첨가하지 않은 경우의 ZnO 박막은 모두 가시광성영역에서 90%이상의 광투과율을 가지고 있었으며, B을 첨가한 경우는 전자농도가 증가함에 따라 광학적 밴드 갭이 3.3eV로부터 3.55eV로 증가하는 거동을 보였다.

  • PDF

Study on the Total Analyses of Cake Filtration with Filtration-Permeation Method (여과-투과 방법에 의한 케이크 여과의 전체적인 해석)

  • Yim, Sung-Sam;Song, Yun-Min
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.29 no.1
    • /
    • pp.74-81
    • /
    • 2007
  • Using the new experimental method named "filtration-permeation", the average specific resistances which plays an important role in designing cake filtration apparatus and the development of cake filtration theory were measured in this study. By this new experimental method, two kinds of average specific resistances are measured. The one from the filtration is named 'filtration average specific resistance $\alpha_{avf}$, and the other from the permeation of particle eliminated water through the pre-formed cake is named 'permeation average specific resistance $\alpha_{avf}$. The "filtration-permeation" method is applied to three different kind of suspensions(i.e. particulate suspension, pre-flocculated suspension and macro-molecule suspension) to obtain filtration and permeation average specific resistances. A theoretical procedure of cake filtration is studied based on the values of permeation average specific resistance. With the study it was concluded that the influence of the sedimentation during particlulate filtration operation could not be ignored as commonly used. And the solid content of suspension, S, which also regarded usually as constant, changes during filtration of particles. It is also verified that the exact value of solid content of cake for floe filtration could not be obtained. These significant problems are all solved by our new "filtration-permeation" experimental method.

Changes in Muscle Activity and Thickness of Resistance Exercise added Aerobic Exercise and Pure Resistance Exercise (유산소 병행 운동과 순수 저항 운동의 근활성도 및 근 두께의 변화)

  • Lee, Byung-Hoon;Yoo, Jae-Young;Jeong, Jin-Gyu
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.8 no.5
    • /
    • pp.763-769
    • /
    • 2013
  • This study aims to compare the effects of pure resistance exercise and resistance exercise added aerobic exercise for enhancing muscle strength of the femoral region and provide the evidentiary materials of an exercise program for improving muscle strength in clinical setting. Muscle activity of rectus femoris showed statistically significant differences after experiment compared to before experiment in the two groups and resistance exercise added aerobic exercise group showed statistically significant difference compared to pure resistance exercise group in group comparison according to the period of measurement. Thickness of rectus femoris showed no significant difference after experiment compared to before experiment in both groups, but resistance exercise added aerobic exercise group showed statistically significant difference after experiment compared to before experiment in group comparison according to the period of measurement. In conclusion, it was found that aerobic exercise after resistance exercise was more effective in enhancing muscle activity and thickness than pure resistance exercise for enhancing muscle activity.

The Hardware Implementation of Chua's Oscillator (Chua 발진기 회로의 하드웨어 구현)

  • 배영철;강명구
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.3
    • /
    • pp.553-561
    • /
    • 2001
  • Chua's oscillator is a simple electronic circuit which exhibits a variety of bifurcation phenomena and attractors, It consist of two capacitors, an inductor, two linear resistors, and a nonlinear resistor. When the circuit exhibits chaotic signals, the nonlinear resistor of Chua's oscillator may have six different voltage - current characteristics. In this paper, the design methodology for practical implementation of the nonlinear resistors which have all these characteristics is described. In addition, the effectivness of result is shown by not only the computer simulation but also the experimental test.

  • PDF

The Effects of Ar Gas Pressure on Thin Films Prepared by dc Magnetron Sputtering (DC 마그네트론 스퍼터링으로 제작된 NiFe 박막에서 Ar 압력이 자기 및 자기저항 성질에 미치는 영향)

  • 민병철;신성철
    • Journal of the Korean Magnetics Society
    • /
    • v.6 no.2
    • /
    • pp.98-105
    • /
    • 1996
  • 스퍼터링 방법으로 제작된 NiFe 박막에서 Ar 압력이 자기 및 자기저항 성질에 미치는 여향을 조사하였다. 타겟으로는 Ni$_{81}$$Fe_{19}$ 조성의 합금타겟을 사용하였다. TEM을 써서 박막의 미세구조를 조사하였으며, 보자력과 포화자화는 VSM으로 측정하였다. 합금박막의 조성은 ICPS로 분석 확인하였다. 10 mTorr 이상의 높은 Ar 압력에서 제작된 박막에서 갈라진 틈새(crack-like void)를 갖는 주상구조가 관찰되었다. 이러한 주상 결정립경계(columnar grain boundary)가 자화 과정에서 자구벽 핀닝자리(pinning site)가 되어, Ar 압력이 커짐에 따라 보자력이 증가 하였으며, 박막의 밀도가 감소하여 포화자화가 줄어드는 것을 볼 수 있었다. 한편, Ar 압력이 증가하면서 자기저항비가 감소하는 결과를 얻었다. 결정립 경계 산란과 결정립간 터널링에 의한 박막의 비저항의 증가가 이러한 자기저항비 감소의 주원인임을 알 수 있었다.다.

  • PDF