• Title/Summary/Keyword: 비응집

Search Result 936, Processing Time 0.03 seconds

토양세척공법을 적용한 유류오염토양 정화 사례

  • Sin Jeong-Yeop;Gong Jun;Kim Geon-U;Jeon Gi-Sik;Hwang Jong-Sik
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2006.04a
    • /
    • pp.45-48
    • /
    • 2006
  • 혼합유류(등,경유)로 오염된 대상부지의 토양특성을 파악하여 세척공법의 적용성을 판단하고, 적용성시험을 통하여 장치별 설계인자를 도출하였다. 시험결과 본 세척대상토양의 경우 계면활성제와 같은 첨가제를 주입하지 않고 물리적인 탈착공정만을 거쳐도 90%이상의 오염물질이 토양입자표면으로부터 탈착됨을 알 수 있었으며, 이를 반영하여 장치를 제작, 설치하였다. 세척대상 오염토량은 총 $12,225m^3$, 사업수행기간은 약 6개월, 세척장치에 주입된 세척토양의 평균오염농도는 약 3,152ppm 이었으며 세척 완료된 토양의 평균농도는 약 150ppm으로 약 97%의 제거효율을 보여 복원목표인 800ppm을 만족시킬 수 있었다. 그리고, 세척토양의 입도분포를 정확히 파악하고 분리시킬 토양입자 크기를 결정하여 현장 적용한 결과 세척공법으로부터 배출되는 응집슬러지를 최소화할 수 있었으며, 발생되는 세척폐수 또한 세척수 처리시스템을 거쳐 재활용 할 수 있도록 하였다. 이런 결과를 통하여 세척공법이 다른 Ex-situ 공법과 비교하였을 경우 현장의 적용성, 경제성, 복원기간 등을 감안하였을 경우 성공적인 세척공법의 적용사례라 할 수 있다.

  • PDF

High Productivity Ethanol Fermentation Using Flocculant Yeast (응집성 효모에 의한 고생산성 알콜 발효)

  • 손석민;김인규;변유량
    • Microbiology and Biotechnology Letters
    • /
    • v.20 no.5
    • /
    • pp.607-613
    • /
    • 1992
  • A tower fermentor equipped with a modified settler was used for ethanol fermentation using highly flocculating yeast, Saccharomyces uvarum. The settler was constructed of glass column divided into two chambers by a funnel shaped divider. Gas was allowed to escape from lower chamber of the settler through a small tube. This design significantly reduced the turbulence in upper chamber of the settler and made it possible to operate at high dilution rate. Using the tower fermentor, the effects of operating conditions such as initial glucose concentration, dilution rate and cell recycle ratio were studied. The maximum ethanol productivity, 64.0 g/l' h was obtained at a dilution rate 1.1 h -1 and a cell recycle ratio 5 with the corresponding ethanol concentration of 58.8 g/l, and cell mass of 88 g/l.

  • PDF

Adhesive Properties of Acrylic Emulsion Pressure Sensitive Adhesives with Polymeric Emulsifier (고분자 유화제를 이용한 수성 아크릴 에멀션 점착제의 접착 물성)

  • 박명철;이명천
    • Polymer(Korea)
    • /
    • v.27 no.6
    • /
    • pp.596-602
    • /
    • 2003
  • A Polymeric emulsifier was synthesized by solution polymerization with 2-ethylhexyl acrylate, n-butyl acrylate, and acrylic acid. A series of polymeric emulsifier have been used in the emulsion copolymerization of 2-ethylhexyl actryacrylate and n-butyl acrylate. The size of the synthesized latex particles was around 145 nm and its distribution was very narrow. Emulsion with polymeric emusifier showed no coagulum after 7 cycles of freeze-thaw test, while the emulsion with traditional emulsifier exhibited coagulum after 2 cycles. The adhesion tests showed that the initial tackiness and peel strength decreased as the molecular weight and acrylic acid content of polymeric emulsifier increased, whereas the holding power increased.

Topic-based Multi-document Summarization Using Non-negative Matrix Factorization and K-means (비음수 행렬 분해와 K-means를 이용한 주제기반의 다중문서요약)

  • Park, Sun;Lee, Ju-Hong
    • Journal of KIISE:Software and Applications
    • /
    • v.35 no.4
    • /
    • pp.255-264
    • /
    • 2008
  • This paper proposes a novel method using K-means and Non-negative matrix factorization (NMF) for topic -based multi-document summarization. NMF decomposes weighted term by sentence matrix into two sparse non-negative matrices: semantic feature matrix and semantic variable matrix. Obtained semantic features are comprehensible intuitively. Weighted similarity between topic and semantic features can prevent meaningless sentences that are similar to a topic from being selected. K-means clustering removes noises from sentences so that biased semantics of documents are not reflected to summaries. Besides, coherence of document summaries can be enhanced by arranging selected sentences in the order of their ranks. The experimental results show that the proposed method achieves better performance than other methods.

Evaluation of Family Adaptability and Cohesion as Risk Factor of Postpartum Depression : Preliminary Study (산후우울증에서 위험인자로서의 가족응집성-적응력 평가 : 예비적 연구)

  • Kim, Bo-Rah;Suh, Shin-Young;Chang, Sung-Woon;Lee, Sang-Hyuk;Choi, Tae-Kyou;Kim, Yong-Woo;Cho, Sung-Joon;Yook, Keun-Young;Ryu, Mi;Kim, Myo-Jung;Kim, Keun-Hyang;Yook, Ki-Hwan
    • Korean Journal of Psychosomatic Medicine
    • /
    • v.17 no.1
    • /
    • pp.15-22
    • /
    • 2009
  • Objectives : Prevalence of postpartum depressive disorders reaches approximately 10-15% of childbearing women. This preliminary study was intended to explore the relationships between postpartum depressive disorders and family adaptability and cohesion. Methods : Childbearing women(n=24) were assessed for risk factors for postpartum depression before and after childbirth prospectively. At gestational age between 36th and 40th week, the questionnaire about various factors before childbirth, Edinburgh postnatal depression scale(EPDS), Family adaptability-cohesion evaluation scale (FACES), and Beck anxiety inventory(BAI) were assessed. After childbirth, for the diagnosis of postpartum depressive disorders, a structured diagnostic interview according to MINI International Neuropsychiatric Interview was performed, furthermore, the questionnaire about various factors after childbirth, EPDS, and BAI were assessed at 4-6 weeks postpartum. Results : Among various factors and scales, family adaptability and cohesion, mood symptom and change during pregnancy were associated with postpartum depressive disorder in comparison with non-postpartum depressive disorder subjects. In addition, low family adaptability and cohesion and mood change during pregnancy were significantly associated factors with postpartum depressive disorder using logistic regression analysis. Conclusion : The results suggest the postpartum depressive disorder could be related with prenatal low family adaptability and cohesion. This preliminary study, however, includes only a few subjects, so that further large-sized study will be needed to replicate our results.

  • PDF

Sensory and Mechanical Characteristics of Surichwi-injeulmi by Adding Surichwi Contents (수리취 인절미의 수리취 첨가량에 따른 텍스쳐 특성)

  • 이숙미;조정순
    • Korean journal of food and cookery science
    • /
    • v.17 no.1
    • /
    • pp.1-6
    • /
    • 2001
  • The purpose of this study was to investigate sensory and mechanical characteristics of Surichwi-injeulmi by adding Surichwi contents. According to sensory evaluation of Surichwi-injeulmi, the acceptance was the best in the color, flavor and overall quality when adding 20% Surichwi. As the additional ratio of Surichwi was increased, the lightness and yellowness were decreased, however, the redness was negatively increased. As a results of textural analysis of Surichwi-injeulmi by adding Surichwi contents in storing at 20$\^{C}$, the hardness, chewiness, gumminess and cohesiveness were decreased with the increased by adding Surichwi contents. The hardness, chewiness, gumminess and cohesiveness were decreased by increased storage time, whereas the elasticity was increased. Textural characteristics of Surichwi-injeulmi added 30% and 40% Surichwi in storing at 20$\^{C}$ showed less change than those of 0 and 10% group.

  • PDF

Enhanced Dewaterability of Sewage Sludge by a Natural Inorganic Conditioner (무기개량제를 이용한 하수슬러지의 탈수능 개선)

  • Nam, Se-Yong;Kim, Jeong-Ho;Kim, Sang-Hyoun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.10
    • /
    • pp.651-655
    • /
    • 2012
  • This study aimed to investigate the effect of an inorganic conditioner composed of natural inorganic materials on the dewaterbility of sewage sludge and compare the performance with those of conventional organic polymeric conditioners. A dosage of 2.0 mg inorganic conditioner/g sludge TS decreased time to filter test (TTF), specific resistance to filtration (SRF), water content of dewatered sludge cake, turbidity from 146 to 41 sec, from $8.3{\times}10^{14}$ to $2.4{\times}10^{14}$ m/kg, from 82.1 to 77.1%, from 112 to 61.1 NTU, respectively, which was compatible to the conventional cation organic polymer. An inorganic conditioner would be used in sewage sludge treatment as a suitable alternative conditioner. Regression analysis showed a strong relationship among TTF, SRF, and water content.

Thickening of Activated Sludge Using Low Pressure Flotation Pilot System (파일롯 규모의 저압형 부상장치를 이용한 하수슬러지 농축에 관한 연구)

  • Kim, Ji Tae;Oh, Joon Taek;Kim, Jong Kuk
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.3
    • /
    • pp.172-177
    • /
    • 2014
  • Low pressure air flotation (LAF) pilot plant for sludge thickening was installed in Chung Nam N.S. municipal waste water treatment plant to verify its application possibility. Effects of operating conditions such as coagulant dosages and microbubble water ratio on thickening of the mixed sludge were examined. Microbubbles which were generated in the chamber of $1.5kgf/cm^2$ by high speed collision method with foaming agent were used to float sludge. Solid loading of $30kg/m^2/hr$, solid contents in thickened sludge of 60,300 mg/L and SS removal efficiency of 99% were obtained through long period operating LAF in conditions of mixed sludge concentration of 14,400 mg/L, coagulant dosage of 27.6 mg/L, foaming agent addition of 4.0 mg/L and microbubble water injection ratio of 9.7%.

Bubble Adsorptive Separation of CuS Precipitates (CuS 침전의 기포흡착분리에 관한 연구)

  • Shin, Jeong Ho;Park, Kyung Kee;Jeong, Kap Seop;Lee, Geun Hee
    • Applied Chemistry for Engineering
    • /
    • v.9 no.1
    • /
    • pp.20-27
    • /
    • 1998
  • The characteristics of the bubble adsorptive separation of CTAB(cetyltrimethylammonium bromide) and CuS precipitates was investigated. The Langmuir adsorption equation was adequate at very low concentration of CTAB, and the adsorption heat was determined from the batch analysis considering the bulk liquid accompanied between bubbles. The adsorption mechanism was explained with the collision adsorption between bubbles and precipitate particles. The optimum concentration ratio of (CTAB) to (CuS) for adsorptive separation was 0.1 and coincided with the ratio for the coagulation of particles. The collection efficiency was depended on pH and CTAB concentration but independent of the air flow rate, and the maximum efficiency was 0.0002. The selective separation of ZnS from the mixture of Cu-Cd-Zn sulfides was obtained by the bubble adsorption with CTAB.

  • PDF

A Study on the estimation of the flow characteristics and the bottom shear stress in an annular flume (환형수조의 내부 흐름특성 및 바닥전단응력 산정에 대한 연구)

  • Yang, Su-Hyun;Im, Ik-Tae;Hwang, Kyu-Nam
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.176-176
    • /
    • 2011
  • 환형수조는 점착성 퇴적물의 이송특성 연구를 위해 가장 선호되는 실험 장치로 알려져 있다. 과거 많은 연구자들은 퇴적물의 이송특성, 특히 침식/퇴적 특성 조사를 위해 주로 수로를 이용한 실험적 연구를 수행하였는데, 최초의 실험적 연구들은 주로 직선수조에서 수행되었다. 그러나 입자간의 응집이 중요한 역할을 하는 점착성 퇴적물의 경우에, 직선수조 끝단에서의 자유낙하 및 재순환 펌프의 날개에 의해 응집된 토사가 쉽게 분리될 수 있어 그 타당성이 의문시 되어 왔으며, 이러한 단점을 보완하기 위해 환형수조가 고안되었다. 환형수조는 수면과 접하여 회전하는 상부링의 마찰력에 의해 흐름이 생성되기 때문에 시간의 제약 없이 흐름조건을 동일하게 만들 수 있다는 큰 장점을 갖는다. 그러나 환형수조는 원주유속의 속도차이 및 원심력으로 인한 2차 순환류를 형성시켜 반경 방향(radial direction)에서의 바닥전단응력을 불균일하게 하는 단점을 갖는다. 이러한 2차 순환류와 바닥전단응력의 불균일을 저감시키기 위하여 환형수조의 몸체를 상부링의 회전 방향과 역방향으로 직접 회전시키는 방법이 채택되어져 왔다. 한편, 환형수조의 상부링과 몸체를 서로 역방향으로 동시에 회전시키는 양방향 회전(counter-rotation)의 적용을 위해서는 2차 순환류가 최소가 되며 바닥전단응력이 균일해지는 최적 회전속도비에 대한 분석은 필수적 사항이다. 이를 위하여, 상부링과 몸체의 회전속도에 따라 변화하는 수조내부의 흐름특성 및 평균바닥전단응력에 대한 연구가 선행되어야만 한다. 이에 본 연구에서는 전산유체역학을 이용하여 전북대에 설치된 환형수조의 상부링과 몸체의 회전속도에 따라 변화하는 수조내부에서의 흐름특성 및 바닥전단응력에 대한 분석이 수행되었다. 또한, 이를 기초로, 환형수조의 최적 회전속도비 산출을 위한 연구가 수행 중에 있다. 이러한 결과들은 추후 환형수조를 이용한 점착성 퇴적물의 침식/퇴적 등과 같은 이송특성 연구시, 퇴적물에 작용하는 흐름조건의 정밀산정을 위한 기초자료로 활용될 수 있을 것이다.

  • PDF