• Journal of Information Management
• /
• v.5 no.3
• /
• pp.57-66
• /
• 1972

시스팀 설계(設計)는 지극히 복잡한 일련의 선택(選擇)으로 이루어져 있거니와, 어느 한가지 결정사항(決定事項)도 이미 내려졌거나 장차 내려질 여타의 결정(決定)들과 완전히 절연된 것은 없다. 문헌정보(文獻情報) 시스팀의 설계(設計)를 위한 시스팀 접근법(接近法)에 있어서는, 시스팀의 작업능력(作業能力), 성능(性能), 비용(費用) 및 기타 특징요인(特徵要因)을 감안하여 설계과정(設計過程)에 이루어질 제선택(諸選擇)과 이들 선택(選擇)에 내포된 세부사항(細部事項)에 대하여 세밀한 검토가 가해져야 한다. 이 보문(報文)의 저자(著者)들은 다음과 같이 6단계(段階)로 된 하나의 체계적 설계절차(設計節次)를 창도하고 있다. 1) 고정설계인자(固定設計因子)의 확인, 2) 가변설계인자(可變設計因子)의 확인, 3) 각(各) 가변설계인자(可變設計因子)에 내포된 제임의요소(諸任意要素)의 확인, 4) 제임의요소(諸任意要素) 가운데서 하나를 선택할 때 그 선택에 영향을 주는 요소(要素)의 확인, 5) 제임의요소(諸任意要素) 가운데서 하나를 선택할 때 그 선택으로 인하여 영향을 받는 요소(要素)의 확인, 및 6) 설계과정(設計過程)에서 내려야 할 제결정(諸決定)의 최적순서(最適順序) 및 결정과정(決定過程) 그 자체의 본질(本質)을 파악하기 위하여, 상술한 바 제단계(諸段階)를 통해서 밝혀진 전체 상황(狀況)에 대하여 논리적(論理的) 분석(分析)을 가(加)함.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.29-36
• /
• 2009

Cost and Time for software test is gradually increasing as the software complexity increases. To cope with this problem, it is very important to reduce the number of test cases used in the software test. The interaction strength number is especially important in decision of the number of test cases for the unit test, where the interaction strength number means the number of arguments which affect the results of a function by the analysis of their combination used in source code of the function. This paper proposes the algorithm that computes the number of the interaction strength, where analyzes the patterns used in the source code of a function and increase its number when the pattern matches one of the specified patterns. The proposed algorithm is validated by some experiments finding coverage and the number of fault detection.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

This paper presents a method to design a repetitive controller that is robust to variations in the system parameters. The uncertain parameters are specified probabilistically by their probability distribution functions. Instead of working with the distribution functions directly, the repetitive controller is designed from a set of models that are generated from the specified probability functions. With this multiple-model design approach, any number of uncertain parameters that follow any type of distribution functions can be treated. furthermore, the controller is derived by minimizing a frequency-domain based cost function that produces monotonic convergence of the tracking error as a function of repetition number. Numerical illustrations show how the proposed multiple-model design method produces a repetitive controller that is significantly more robust than an optimal repetitive controller designed from a single nominal model of the system.

• Journal of Rhinology
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2018

Olfactory dysfunction is one of the most common complaints of patients with chronic rhinosinusitis. Patients who suffer from olfactory dysfunction report a negative effect on their overall quality of life. Chronic rhinosinusitis-related olfactory impairment is the most treatable form of olfactory disorder; however, outcomes after endoscopic sinus surgery (ESS) are challenging to predict. Previous studies have documented a wide range in overall improvement after ESS. The purpose of this study is to review the factors that predict changes in olfaction after ESS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.315-315
• /
• 2019

증산과 증발의 합으로 나타내지는 증발산은 지구내에서의 수문 순환에 영향을 미치는 중요한 인자로써, 지표와 대기의 에너지 교환을 담당하고 있다. 정확한 관측을 위해서 오래전부터 증발산에 대해서 관측하기 위하여 직접관측 방법들인 증발산계를 이용한 관측방법, 에디 공분산 방법을 이용한 플럭스타워 관측 방법 등을 사용하였으며, 물리 및 경험적인 방법인 Penman (1948), Monteith (1965) 방법, PT (Priestley and Taylor, 1972) 방법 등을 이용함으로써 증발산과 관계를 가진 수문기상인자를 이용함으로써 증발산에 대해서 추정하여 왔다. 대부분 지상 관측에 의존하기 때문에 시공간적인 값의 표현이 어렵다는 문제를 가지고 있으며, 관측 장비의 관리 및 유지비용이 증대로 인하여 조밀한 관측망을 구축하기 어렵다. 이러한 단점을 개선하고자 인공위성 및 재분석 자료를 활용하여 여러 경험식을 통해서 증발산 자료가 제공되고 있다. 그러나 이러한 자료들의 문제점은 각기 다른 경험식 및 다른 입력자료를 제공하고 있을 뿐만 아니라, 자료별 지역별 정확성이 차이가 발생한다. 따라서, 최근 연구에서는 지점자료와 인공위성 자료 및 재분석 자료를 모두 사용함으로써 수문기상인자를 개선하고자 하는 연구가 진행되어왔으며, 정확성 또한 개선된 것을 확인 할 수 있다. 그러나, 이러한 방법들의 가장 큰 문제점은 관측 자료가 필수적으로 필요하다는 것에 있다. 대부분의 나라나 지역에서는 조밀한 구축망을 구축하기 어렵기 때문에 실질적으로 적용하기가 어렵다는데 있다. 따라서 본 연구에서는 이러한 문제를 해결하기 위하여 지점자료가 필요없는 융합방법을 triple collocation 방법을 이용함으로써 제안하고자 한다.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.75-89
• /
• 2006

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology of steel bridges considering time effect of bridge reliability under environmental stressors such as corrosion and heavy truck traffics. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure which depends upon the prior and updated load and resistance histories should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model considering corrosion initiation, corrosion rate, and repainting effect are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40 m+50 m+40 m=130 m), and various sensitivity analyses of types of steel, local corrosion environments, average daily traffic volume, and discount rates are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the number of truck traffics significantly influence the LCC-effective optimum design of steel bridges, and thus realized that these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.245-256
• /
• 2016

Prediction of TBM performance is very important for machine selection, and for reliable estimation of construction cost and period. The purpose of this research is to analyze the evaluation process of various prediction models for TBM performance and applied methodology. Based on the solid literature review since 2000, a classification system of TBM performance prediction model is proposed in this study. Classification system suggested in this study can be divided into two stages: selection of input parameter and application of prediction techniques. We also analyzed input and output parameters for prediction model and frequency of use. Lastly, the future research and development trend of TBM performance prediction is suggested.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.129-136
• /
• 1995

In spite of the prescriptions on the reference X-ray fields given by the International Organization of Strandard(ISO) and American National Standard Institute(ANSI), the measurement of X-ray spectrum is not only time consuming but very difficult, paticularly when significant corrections have to be applied to the measured pulse-height distributions of the observed spectra. This paper describes the calculation method of ISO Narrow Series and ANSI X-ray filtered radiations by theoretical model which is modified framer's theory by target attenuation and backscatter correction. The X-ray spectra, average energies and conversion coefficients are calculated and compared with those obtained using the spectra prescribed by ISO and AMSI to assure good agreement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.96-103
• /
• 1995

의류산업의 효율성 (efficiency) 제고를 위한 중요한 결정의 한가지는 상품생산지 및 생산방법 즉 생산지 결정전략(sourcing strategy)에 관한 것이다. 점차 생산의 대상지역과 방법이 다양해짐에 따라 이는 복잡한 의사결정체계를 요하게 퇸다. 본 연구는 생산지 결정의 의사결정과정에서 흔히 중요시되는 생산비용 이외에 비생산비용, 즉 거래비응(transaction cost)으로 포현될 수 있는 인자를 분석하고자한다. 이를 위해 미국 의류, 신발 산업의 생산지 결정의 첫단계로서 해외기지생산과 국내생산의 문제점을 비교하였다. 의류산업과 신발산업에 있어 적시공급과 품질관리가 생산지에 관계없이 공통된 문제점으로 지적되었고 의류산업의 겋우 노동력 부족과 재료의 공급이 국내생산의 문제점으로, 오랜생산기일과 생산국가의 환경적요소(예를 들면, 정치적 불안정, 정부규제 등)가 해외기지생산의 특이한 문제점으로 지적되었다. 본 연구는 비국의 의류, 신발 산업을 대상으로 한 것이나, 최근 저가의 노동력을 찾아 동남아 또는 남미로 생산지를 이전하는 국내 의류, 신발업체들이 급격히 증가하고 있음을 감안할 때, 우리 산업에도 시사하는 바가 크다고 할 수 있다.