• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.108-117
• /
• 2013

The domestic CM business market has continued to grow, but its size is relatively small yet in comparison with the total size of the domestic construction industry. Evaluation of CM projects was conducted through questionnaire surveys. Both clients and CM firms showed positive satisfaction levels. Nevertheless, the clients' satisfaction levels were relatively low in safety management, cost management, and document and information management. Superior areas of CM tasks were time management and recovery scheduling, quality control and technical instruction, and design value engineering. On the other hand, inferior areas of CM tasks were claim analysis and dispute resolution, cost estimation, and life cycle costing. Both entities have agreed with the positive effects of CM involvement in terms of cost saving, time reduction, quality improvement, and safety incidents prevention to at least 0~5% extent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.295-300
• /
• 2009

Statement of problem: As the number of elders is growing with the advancement of medicine, partially or fully edentulous patients have increased. Medically compromised conditions are common in the older population so that it should be taken into account in prosthetic treatment planning as well as their economic conditions. In the older patients, removable prosthesis has been preferred to implant prosthesis. However, cast metal based removable partial dentures also has several limitations. Purpose: In this report, we present several cases of Valplast$^{(R)}$ flexible denture which were fabricated in patients who had medically compromised conditions or whose remaining teeth showed a relatively poor prognosis. Results & Conclusion: This article describes an alternative treatment for a partially edentulous patient with mouth opening limitation, after cancer surgery, compromised general condition and questionable remaining teeth. In these patients, Valplast$^{(R)}$ flexible denture was used because of its unique characteristics and the results were all satisfactory. Patients had 1-2 check-up and there were no postoperative pain or fracture of denture up to now.

• Journal of Service Research and Studies
• /
• v.9 no.4
• /
• pp.63-80
• /
• 2019

This study presents strategic implications for enhancing the competitiveness of the comprehensive health examination center through the study of its impact on the switching barrier with medical service value and medical service satisfaction as parameters. In order to achieve the purpose of this study, a total of 324 questionnaires were analyzed for customers who received health examinations at the general examination center. Covariance structure analysis was performed to test hypotheses and causal relationships. The results showed that the physical environment had a significant effect on the medical service value and medical service satisfaction. The value of medical service also had a significant effect on medical service satisfaction. The value of medical service was found to affect the transition barrier, but the satisfaction of medical service did not affect the transition barrier. The implications of this study are that physical environment has a significant effect on medical service value and medical service satisfaction. Therefore, modern medical equipment should be equipped with the latest medical equipment to minimize accurate examination and misdiagnosis through modernization of medical examination center. In addition, since the value of medical service has a significant effect on the switching barrier, it is necessary to establish a plan to enhance the value of medical service. We need to promote sustainable customer retention and creation of new customers through differentiated screening items and cost advantages over competitors. In addition to check-up services, efforts should be made to enhance the value of services such as strengthening medical communication and medical complex cultural spaces, and at the same time, establish an organizational culture of customer-first examination centers through the placement of excellent personnel and continuous education.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.06a
• /
• pp.91-120
• /
• 1996

경제발전과 더불어 산업의 많은 분야에서 순수 및 초순순의 사용이 증가하고 있으나, 환경오염에 의한 원수의 오염에 따라 순수 및 초순순제조의 장치비와 처리비용의 증가가 야기되고 있다. 현재 국내에는 화력, 원자력발전소를 비롯하여 열병합발전소, 석유화학공장, 제약회사, 전기 전자부품회사, 반도체회사 및 철강회사 등 많은 분야에서 순수 및 초순수 제조장치의 구성과 성능이 많은 차이를 나타내고 있다. 국내의 초순수 제조장치는 90% 이상이 이온교환수지를 사용하는 이온교환법과 UF, R/O System과 같은 Membrane을 사용하는 Membrane System을 병행하여 적용하고 있다. 국내 초순수처리 Plant에서는 통상 전처리 System과 1차 순수제조 System 및 초순수 System이 상호 연결되어 Plant가 구성 운영되고 있다. 전처리 System에는 응집침전, 여과 흡착, 살균 등이 적용되고 있으며 여과 System에 Membrane을 적용할 수 있으나 국내에서는 특별한 경우를 제외하고 대부분 전처리 여과 System에 Media Filter를 사용한다. 전처리 System도 순수처리 장치의 전처리로는 없어서는 안되는 System이지만 여기에는 전처리 System을 제외하고 국내에서 적용하고 있는 초순수처리 System의 공정현황과 각 System별 특징을 설명하고 있다. 초순순 System에는 요구 수질에 따라 다소 차이가 있지만 반도체 공업에서 사용되는 초순수 System이 이중 최고의 Grade로 반도체공업에서 적용되고 있는 System을 기준하였다. 특히 Membrane을 적용한 초순수제조 System이 증가하고 있어 R/O, ED, EDR, CDI, (EDI)와 같은 Membrane System의 특성과 원리를 검토하였다.대적으로 높은 산소확산계수와 물에 대해서는 낮은 투과도를 가져야 한다. 높은 산소확산계수는 반응을 빠르게 하는 잇점이 있으며 물에 대한 낮은 투과도는 센서내의 전해질 물질을 유지보호하는 역할을 한다. 분리막이 산소전극에 이용될 경우 높은 산소 확산계수 이외에도 적절한 기계적 강도, 열적 안정성 등이 요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.93-102
• /
• 2012

The purpose of this research is to create a preferable corporate culture under the SmartWork environment. There is growing interests in SmartWork, which can satisfy the compatible conditions of government's carbon emission restriction policy, corporate efficient expense reduction, productivity maximization, and each individual's work and a family. Due to the interests and the rapid development of IT technology, a realistic condition for SmartWork is established but the promotion without a sufficient preparation, such as legal examination and relevant systems, created much confusion and very few companies are introducing it. This paper discusses that a social agreement should be reached through adjustments among parties interested, such as government, companies, and employees, studies the WIN-WIN plan that individuals and organization can grow together, and proposes a new corporate culture under the SmartWork environment. SmartWork has more than the simple meaning of 'remote working'. SmartWork, a method of smart working, means a transition to a new paradigm that minimizes moving for work and work & human move together, and a change from a work-oriented culture to a human-oriented culture. This paper summarized the role of government and companies for the successful introduction of SmartWork, and proposed that a government level 'SmartWork Activation Executive Committee (tentative name)' with a strong promotional power would create a new culture of SmartWork and form a civilian consultative body to support SmartWork corporate culture creation & expansion in the private corporate area, in a tuning with Ministry of Public Administration & Security, Ministry of Labor, Ministry of Gender, and Communications Commission.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2005.09a
• /
• pp.197-230
• /
• 2005

일본의 Soyo town에서 진행된 건강도시사업은 건강증진 프로그램 모형을 통하여 건강한 도시를 건설하겠다는 슬로건을 가지고 주민들이 참여하여 자신의 건강관리능력을 함양하고 서로의 장점을 공유하는 것을 사명으로 하고 있다. 또한 삶의 질 향상, 주관적 건강상태 향상, 삶의 만족도 향상, 정서적 유대감 향상, 수입증가 그리고 조기사망의 감소를 구체적 목적으로 설정하고 있다. 이러한 목적을 달성하게 위한 매우 실제적이며 수량화된 목표들이 설정되어 있다. 1992년에 사전조사를 실시하고 1996년과 2002년에 사후 조사를 실시하였다. 프로그램 내용과 과정에는 보건의료전문가와 시설에 대한 정비, 평가에 대한 계획, 학교를 포함한 포괄적인 보건의료시스템이 포함된다. 모든 부문은 자신들이 설정한 보건정책 결과에 대하여 모니터링을 진행하며 적절한 정책을 다시 설정하고 수량화된 목표를 설정하며 프로그램을 수행한다. 프로그램 수행의 가장 중요한 원칙은 사업의 기획, 수행, 평가 과정에 주민이 최우선적으로 참여한다는 점이다. Soyo town은 사업을 위하여 학교 및 지역 내 사조직과 협력하고 모든 사업의 기획과정에 다양한 구성원들을 참여시켰는데 이는 건강자원 개발에 있어 매우 중요하게 실천되어야 하는 문제이다. 특히 모든 Soyo town의 주민들이 참여하는 것을 원칙으로 하였다. 주민들은 건강관련 자원의 배치상태와 과학적 근거를 고려하여 효과적인 사업을 선정하는 것을 포함한 모든 사업의 과정에 참여하였다. 바람직한 생활양식을 향상시키기 위하여 식품회사, 자원단체 그리고 사회적 관계망 그리고 지역의 단체급식시설, 식당 등이 파악되었으며, 요양원, 가사도우미, 공중보건간호사, 방문간호사, 사회사업가로 구성된 보건의료 시설과 인력들이 협력하였다. 사업이 주민의 건강을 향상시켰는가와 건강향상에 사업이 효과적이었는지를 판단하기 위해서 평가가 진행되었는데, 서비스 제공자 뿐 아니라 소비자와 주민들도 평가를 수행하였다. Soyo town의 건강도시사업의 평가 결과, 조기사망률이 1988년 22.1%이 1992년 18.2%로, 1998년 15.6%로 감소하였다. 또한 주관적인 건강상태는 1988년 48%에서 1992년 67.1%로, 1998년 71.5%로 증가하였다. 전반적으로 주관적 건강상태, 사회적 관계망, 보건의료서비스에 대한 접근성은 증가하였으며, 조기사망, 의료비용은 감소하였다. 한편 보건의료부문의 질적인 향상을 가져왔으며, Soyo town은 건강한 도시의 명성을 얻게 되었다. 사업의 효과성을 향상시킨 요인은 주민 개개인들에게 사업의 기획과정에 처음부터 참여할 기회가 주어졌다는 점과 자원개발에 있어 기존자원의 재개발에 우선순위를 두었다는 점이었다. 효과적인 사업의 수행을 위하여 행정부, 주민, 건강관련 단체들은 수단과 방법에 관한 정보를 교환하는 것이 중요하다. 사업의 기획단계에 모든 이해당사자들이 참여하여 각자의 역할분담을 명확히 하는 것이 필요하며, 건강증진은 개인의 노력 뿐 아니라 사회적 환경의 개선과 자원의 개발을 통해서 달성되는 것이므로 주민들은 건강증진을 위한 환경개선을 위해 노력도 병행되어야 한다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.1-10
• /
• 2004

Quite many papers about moving objects database (MOD) have been Published. Most of them are concerning of improving efficiency of updating policy, but none of them talks about verification of system's requirements. No matter how efficient updating policy is employed, a system designer still has to verify if the MOD satisfies user's requirement at the beginning of system lifestyle. For example, if a MOD serves n moving objects, then the designer must verity if it can update information for n moving objects and provide new information to moving objects within specified time limit. For the purpose of requirement analysis of MODs, we build a Petri net model for MOD using Design/CPN, and then we show how to verify whether the MOD satisfies user's requirements by simulation. The contribution of this paper is providing a simulation model for requirement analysis of MOD for the first time. The model is expansion of our previous fuzzy-timing Petri net model. The distance-based updating policy, and distributed database management system are reflected in this model and system analysis for moving objects is considered. It is built in Design/CPN so that the simulation can be automatically performed. The application of our model is not limited to requirement analysis, it is useful to study other MOD design issues, such as the trade-offs between update cost and information accuracy, and between the tim interval needed for updating database and MOD system resources, etc.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.124-131
• /
• 2009

A reliable detection of regions in radiography is one of the most important task before the evaluation of defects on welded joints. The extracted features is to be classified into distinctive clusters for each segmented region. But conventional segmentation techniques give unsatisfactory results for this task due to the spatial superposition of intensity and low signal-to-ratio(SNR) in radiographic images. The usage of global or local processes not only provide the necessary noise resistance but also fail in classification of regions. In this paper, we presents an appropriate approach for segmentation of region-based indications in industrial Computed Radiography(CR) images. The geometric differences between welded and non-welded area which is generated on radiography as the representative regions(background, thickness, middle and welded region in steel tube image) have constructed the hierarchical structure. Although this structure is contaminated by noise, the scheme between regions can be selected by the help of local clustering based on distinctive geometric property of each region. Because of the geometric nature of the considered region and so that the region is selected layer by layer, and that the real class represents the boundary between regions, the vertical and horizontal clustering process in each layer must be judicious. In order to show the effectiveness of this approach, a comparative experiment of various segmentation method is performed on industrial steel tube CR images.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.89-95
• /
• 2010

The chalcopyrite $Cu(In_xGa_{(1-x)})Se_2$ (CIGS) is considered to be one of the effective light-absorbing materials for thin film photovoltaic solar cells. We describe the electrodeposition of CIGS thin films in ambient laboratory conditions, and suggest the electrochemical conditions to prepare stoichiometric CIGS thin films of Ga/(In + Ga) = 0.3. In acidic solutions containing $Cu^{2+}$, $In^{3+}$, $Ga^{3+}$ and $Se^{4+}$ ions, the CIGS films of different Cu/In/Ga/Se chemical compositions were electrodeposited onto Mo/Glass substrate. The structure, morphology and chemical composition of electrodeposited CIGS films were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Energy dispersive X-ray spectroscopy (EDS), respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.317-322
• /
• 2006

Dental caries in children has declined over the past few decades. However, Certain populations of children experience high levels of dental disease. To perform the highest quality dental care for the pediatric patient, the practitioner may need to use pharmacological means to obtain a quiescent, cooperative patient. Furthermore, complex treatment can impose high demands on the very young, making use of general anesthesia the preferred approach for some patients. General anesthesia is widely used to provide comprehensive dental treatment for children in USA and Europe and Scandinavia etc. Parental and patient satisfaction following completion of dental care under general anesthesia is reportedly high. Dental general anesthesia has disadvantage that it is expansive and carries a small but significant risk of mortality. However, It has the advantage of permitting treatment at a single visit, allowing immediate relief of pain and requiring little or no cooperation from the child. Rampant caries was the major indication for use of general anesthesia in the youngest age group or medically compromised patients. This study describe the characteristics of patient receiving comprehensive dental treatment under general anesthesia at the pediatric dentistry of Chonbuk National University Hospital in Jeonju, Korea in the 4year period between December 2001 and April 2005.