• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.24-34
• /
• 2013

Since 2004, the government decided to gradually introduce Actual Cost Data into cost estimate for improving problems of below-cost tendering and to reflect fair market price through competition and carry contract efficiently. However, there are many concerns that Actual Cost Data has not reflected real market price, even that has contributed to reduce the government's budget. General construction firm's burden for labor cost is imputed to specialty contractors and eventually it becomes construction worker's burden. Therefore, realization of Actual Cost Data is very important factor to settle this system. To understand realization level and make short term forecast, this paper drew construction group of which labor cost constitutes more than 95% of direct cost, and compares their Actual Cost Data with relevant skilled workers's unit wage and predicts using time series analysis. The bid price which is not be reflected market price accelerates work environment changes and leads to directly affect such as late disbursement of wages, bankruptcy to workers. Therefore this paper is expected to be used to the preliminary data for solving the problem and establishing improvement of Actual Cost Data.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2015

Fire in the risk management subject belongs to high risk disaster which accompanies personnel and materiel loss. So, management of disaster and safety is required to include fire prevention activities, fire risk prediction and investment of safety management expense. Combustion toxicity is required by gas toxicity test (KS F 2271), to minimize human damage. In this study, gas toxicity test were experimented with regard to urethane sample (Depth 5~25 mm) to obtain basic data. Fire effluent exposing to experimental animal were analyzed by FT-IR (Fourier transform infrared spectroscopy). Combustion toxicity index Lethal Fractional Effective Dose ($L_{FED}$) of ISO 13344 was calculated. According to the result of calculating Lethal Concentration 50% ($LC_{50}$) based on $L_{FED}$, $LC_{50}$ of urethane sample containing certain level of fire load is confirmed as $118{\sim}129g/m^3$. Through this study, applicability of this method was confirmed for fire risk assessment. This method can provide information to predict human damage by toxicity combustion gas for securing safety.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.97-104
• /
• 2016

Because of rapid growth of data size, the number of data storage has been increased. When using multiple data storages, a distribute file system is essential to insure the availability of data files. The power consumption is a major problem when using a distributed file system with many data storages. Previous works have aimed at reducing the energy consumption with efficient file block layout by changing some data servers into stand-by mode. The file block migration has not been seriously considered because migration causes large cost. But when we consider addition of a new data server or file, file block migration is needed. This paper formulates the minimization of data block migration as an ILP optimization problem and solves it using branch-and-bound method. Using this technique, we can maximize the number of stand-by data servers with the minimum number of file block movement. However, computation time of branch-and-bound method of an ILP optimization problem increases exponentially as the problem size grows. Therefore this paper also proposes a data block and data server grouping method to solve many small ILP problems.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.9-15
• /
• 1976

Financial rotations of Pinus koraiensis stands are calculated and compared on the basis of five basic financial maturity concepts. The rotations given by the forest rent and average annual gross revenue models are in excess of sixty years by adopting zero interest rates of capital and forest lands. IRR model also neglects land value and highly sensitive to the changes of fixed and regeneration costs. The Faustmann doctrine recommands rotation ages of 23-39 years depend upon applied interest rates and site indices, and seems to be most adequate for determining financial maturity. It is however the situation in Korea that economic conditions are changing rapidly, and thus a model which does not require many exogenous variables in calculation process is preferable. The Duerr's solution has a basic simplicity and logic which is appealing from both a theoritical and practical viewpoint, and most adaptable to the Korean situation, even though the model completly neglects the opportunity cost for forest land. There is a tendency to reduce rotation length with the increase of site quality, but the difference is negligible.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.46-55
• /
• 1993

조종사가 수행하는 조종 업무는 여러 정보를 동시에 지각하여 처리하여 야 하는 복잡한 작업으로 구성되어 있어, 조종사에게는 고도의 인간성능이 요구되고 있다. 또한 조종기술을 습득하기 위해서는 많은 훈련시간과 비용 이 소요되며, 조종사의 실수는 치명적인 사고를 초래한다. 따라서 조기에 비행 부적격자를 판별하고, 미흡한 조종 적성을 함양시킬 수 있는 교육 . 훈련 프로그램을 조종 후보생에게 적용시키는 분석적 조종적성 진단 체계 개발은 조 종사의 도태율 감소, 효율적인 비행훈련, 비행 안전사고 감소 등의 측면에서 절실하게 요구되고 있다. 본 연구에서는 조종 업무 수행시 요구되는 여러 인간 기능의 중요도 차이를 조종 적성 평가 체제에 적용하기 위해서, 각 적성 검사 항목들의 상대적 중요도를 분석하고 이의 타당성을 평가하였다. 적성검사 항목의 상대적 중요도 분석은 조종적성검사 계층구조의 각 수준별 쌍체 비교 평가와 AHP(Analytic Hierarchy Process) 분석에 의한 상대적 중요도 산출 및 평가, 그리고 일관성 지수(Consistency Index)에 의한 분석 결과의 조정을 통해 이루어 졌다. 적성검사 항목의 쌍체 비교 평가는 심리기능검사, 비행자질 검사 등 총 29개 적성검사 항목에 대해 검사를 받았고 또한 초등비행 훈련과정을 수료한 조종 학생들에 의해 이루어 졌다. 상대적 중요도를 분석한 결과 심리기능 검사(W=0.30)가 다른 검사에 비하여 조종적성 평가에 중요한 검사로 나타났으며, 세부 항목으로는 주의 분배력(W=0.13), 추적능력(0.06) 등이 상대적으로 중요한 검사 항목으로 나타났다. 또한 상대적 중요도 결과를 적용한 적성검사 성적이 적용하지 않은 적성검사 성적에 비해 비행성적에 대한 예측 능력이 좋은 것으로 평가되었다.al age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과

• Journal of Korea Water Resources Association
• /
• v.44 no.5
• /
• pp.377-388
• /
• 2011

Surface Image Velocimetry (SIV) is a recently-developed discharge measurement instrument. It uses image processing techniques to measure the water surface velocity and estimate water discharge with given cross section. The present study aims to implement a FSIV (Fixed-type Surface Image Velocimetry) at Soojeon Bridge in the Dalcheon. The hardware system consists of two digital cameras, a computer, and a pressure-type water stage gauge. The images taken with the hardware system are sent to a server computer via a wireless internet, and analyzed with a image processing software (SIV software). The estimated discharges were compared with the observed discharges through Goesan dam spillway and index velocity method using ADVM. The computed results showed a good agreement with the observed one, except for the night time. The results compared with discharges through Goesan dam spillway reached around 5~10% in the case of discharge over 30 m3/s, and the results compared with discharges through index velocity method using ADVM reached around 5% in the case of discharge over 200 $m^3/s$. Considering the low cost of the system and the visual inspection of the site situation with the images, the SIV would be fairly good way to measure water discharge in real time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1134-1138
• /
• 2010

호소의 수질오염 문제를 해결하기 위해선 우선 소하천에서 강우유출에 의한 비점오염물질이 어디서 얼마나 발생하는지에 대한 정량적인 조사가 필요하다. 그러나 유역의 오염원에 대한 정량적인 조사가 이루어지려면 많은 비용과 시간 그리고 노력이 필요하다. 따라서 본 연구에서는 대청호 상류유역의 소하천인 안내천을 대상으로 강우유출수 조사를 실시하고, 높은 예측 정확성 때문에 세계적으로 널리 쓰이고 있는 Long-Term Hydrologic Impact Assessment(L-THIA)을 이용하여 실측데이터와 L-THIA 모델의 결과를 비교하였다. 안내천의 유역면적은 16.5 $km^2$로 유역의 약 69.5%가 산림, 농업 및 초지지역이 25.3% 그리고 주거지역이 2.6%로 조사되었다. 수질분석을 위하여 자동수질시료채취기(ISCO sampler 6712)를 설치하여 시간단위의 시료를 채취한 뒤 수질농도를 측정하였다. 수질항목은 유기물질인 $BOD_5$, TOC, T-N, T-P 항목에 대하여 수질오염 공정시험법으로 분석하였다. WHAT 시스템을 이용하여 분리된 직접유출량은 315.5~161,835.1 $m^3$의 범위로 나타났다. 직접유출량을 이용하여 산정한 유역의 EMC 농도는 안내천 유역의 $EMC_{BOD}$는 1.0~2.4 mg/L, $EMC_{TOC}$는 1.429~5.491 mg/L, $EMC_{COD}$는 2.2~10.2 mg/L, $EMC_{TN}$은 2.906~10.864 mg/L, $EMC_{TP}$는 0.029~0.285 mg/L의 범위를 보였다. 또한 실측된 유량과 농도를 이용하여 산정한 오염부하는 안내천 유역이 $BOD_5$ 37.9~390.9 g, $COD_{Mn}$ 0.8~1,657.5 g, TOC 0.54~791.83 g, T-N 0.968~1,758.174 g, T-P 0.011~42.139 g의 범위로 나타났다. L-THIA 모델을 이용하여 직접유출량의 산정된 결과와 실측 결과를 비교 분석한 결과 결정계수와 유효지수가 0.95와 0.93으로 높게 나타나 대청호 상류유역에서 발생하는 유출량을 모의하는데 적절할 것으로 판단된다. 토지이용도와 토양도 그리고 일 강우자료만으로 구축되는 L-THIA 모델을 이용하여 대청호 상류의 소하천 유역에 대하여 비점오염원 유출특성을 해석하는 것이 가능 할 것으로 판단된다.

• Journal of KIISE:Databases
• /
• v.31 no.4
• /
• pp.395-408
• /
• 2004

A conjunctive Boolean text query refers to a query that searches for tort documents containing all of the specified keywords, and is the most frequently used query form in information retrieval systems. Typically, the query specifies a long list of keywords for better precision, and in this case, the order of keyword processing has a significant impact on the query speed. Currently known approaches to this ordering are based on heuristics and, therefore, cannot guarantee an optimal ordering. We can use a systematic approach by leveraging a database query processing algorithm like the dynamic programming, but it is not suitable for a text query with a typically long list of keywords because of the algorithm's exponential run-time (Ο(n2$^{n-1}$)) for n keywords. Considering these problems, we propose a new approach based on a property called the join sequence separability. This property states that the optimal join sequence is separable into two subsequences of different join methods under a certain condition on the joined relations, and this property enables us to find a globally optimal join sequence in Ο(n2$^{n-1}$). In this paper we describe the property formally, present an optimization algorithm based on the property, prove that the algorithm finds an optimal join sequence, and validate our approach through simulation using an analytic cost model. Comparison with the heuristic text query optimization approaches shows a maximum of 100 times faster query processing, and comparison with the dynamic programming approach shows exponentially faster query optimization (e.g., 600 times for a 10-keyword query).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.614-623
• /
• 2017

The purpose of this study is to analyze the impact of the financial performance of regional public hospitals on their efficiency. In addition, the analysis of their efficiency using environmental factors, such as the market share, operating mode, and size of the regional public hospitals, as well as the factors influencing their efficiency, are selected by selecting the input and output factors of the hospitals and some differences were found between them. The DEA index and financial performance of the 31 regional public hospitals were calculated for the three years from 2012 to 2014. ANOVA and hierarchical regression analysis were used. As a result, there was a significant difference in their efficiency according to the environmental factors, such as the city scale of the regional public hospital, the number of hospital beds, and their business performance, productivity, and publicness. The medical profit margin (p<0.05), labor cost investment efficiency (p<0.05) and HHI (p<0.05) were found to affect the efficiency. In order to identify the inefficiencies of the regional public hospitals and increase their efficiency, it is necessary to measure the efficiency of the input resources and to reduce their cost. In addition, if the regional public hospitals were to provide specialized services, such as specialized functions of medical care that would give them a competitive advantage over private hospitals, their operational efficiency would be enhanced and they would be able to fulfill their role as public medical institutions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.420-425
• /
• 1999

The maximum demand controller is an electrical equipment installed at the consumer side of power system for monitoring the electrical energy consumed during every integrating period and preventing the target maximum demand (MD) being exceeded by disconnecting sheddable loads. By avoiding the peak loads and spreading the energy requirement the controller contributes to maximizing the utility factor of the generator systems. It results in not only saving the energy but also reducing the budget for constructing the natural base facilities by keeping thc number of generating plants ~ninimumT. he conventional MD controllers often bring about the large number of control actions during the every inteyating period and/or undesirable loaddisconnecting operations during the beginning stage of the integrating period. These make the users aviod the MD controllers. In this paper. fuzzy control technique is used to get around the disadvantages of the conventional MD control system. The proposed MD controller consists of the predictor module and the fuzzy MD control module. The proposed forecasting method uses the SOFM neural network model, differently from time series analysis, and thus it has inherent advantages of neural network such as parallel processing, generalization and robustness. The MD fuzzy controller determines the sensitivity of control action based on the time closed to the end of the integrating period and the urgency of the load interrupting action along the predicted demand reaching the target. The experimental results show that the proposed method has more accurate forecastinglcontrol performance than the previous methods.