• The Journal of Society for e-Business Studies
• /
• v.16 no.4
• /
• pp.109-123
• /
• 2011

The maintenance prices in information security industry between Korean companies and foreign companies have been a big difference. Korea Information Security SW maintenance standards were not adequate for the rate, and there was disagreement between domestic companies and governments. This research, therefore, surveyed a standard of information SW and the status of maintenance payment rates. The study suggests an estimation method and verifies the method and an appropriate maintenance cost rate. According to the results of the study, the current maintenance cost should be increased or decreased independent with a kind of information security systems. Based on the study, Korea government is able to change the maintenance policy in information security. And the domestic companies get a theoretical ground for improving the rates of maintenance costs in information security systems and are able to allot the resources effectively.

• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.373-380
• /
• 2004

In this study, the emission rate of pollutant was modified according to the published standards, and the distribution of pollutant concentration was analyzed for each vehicle velocity. This modified emission rate was applied to a model tunnel and it was proved that the required air quantity was reduced to 49%, compared to the PIARC method. From the simulation result, it was proved by using statistics that the most sensitive factor among them is the friction coefficient and it was modified to the value in the range of 0.018 to 0.021. It is also expected that the required air quantity can be decreased form 14.4% to 19.2% according as the coefficient is applied to the domestic model tunnels. In conclusion, it is proposed that the number of jet fans can be reduced and the annual operating cost can be curtailed as well.

• Journal of KIBIM
• /
• v.1 no.1
• /
• pp.18-25
• /
• 2011

Construction cost estimation in the early phase provides the opportunity to make reasonable decisions related to the project. For estimating this cost, various methods have been developed. But several problems have been recognized like accuracy, relation beteewn design and cost etc. In this study, we developed the method of cost estimating for building parts. The modified method has defferent ratio of space functions to calculate cost more correctly. Also historical cost data is used in this modified method for architects to estimate cost conveniently. By this modified method, we expects architects should easily design buildings based on cost.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.264-272
• /
• 2012

TRL has a direct impact on development schedule and cost in the system or technology development projects. If TRL capability of development organization for specified CTEs can be accurately assessed and the impact of TRL on development schedule and cost are analyzed as detailed as possible, the risk of development schedule delay and cost increase can be minimized during the development process. This paper describes analysis results of TRL impact on development schedule and cost in the aerospace project. The development schedule and cost change are quantitatively estimated for the TRL improvement in the Unmanned Aerial Vehicle(UAV) system development program.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.119-128
• /
• 2015

Domestic dominant method in subcontract cost estimate for comprehensive program management is estimation by referencing similar cases or relying on the experience and expertise of the engaged. However, this method is not reliable due to lack of accuracy, making it harder for clients to plan and budget the program. Since budget itself is roughly estimated, it becomes a source of cost rise in the course of management due to design modifications. Therefore, the client and service providers shall calculate more accurate service cost by applying objective and scientific method in order to minimize cost rise and cost related dispute. Traditional cases, in estimating program management cost, took Top-Down approach based on precedents and experience. On the contrary, this study will categorize management structure into phases and activities, issue WBS for each phase to estimated schedule and cost for each code, and take Bottom-UP approach. By taking this approach named ICEP (Integrated Cost Estimate based on Project), Set project typical model will be developed for service cost estimating, calculate cost by applying project-specific factors. Also, by analyzing progress data and allocated management cost to complement them, more efficient construction management will take shape based on program management cost standards which reflect project-specific features.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.103-110
• /
• 2008

General lens, widely using in Photogrammetry, has narrow view, and have to adjust "Image-Registration Method" after obtain images and it need cost; economic, period of time. Recent days, there is various study that use wide-angle lens, usually for robotics field, put to practical use in photogrammetry instead of general lens. In this studies, distortion tendency of wide-angle lens and utilize the correction techniques suitable to wide-angle lens by the existing photographic survey methods. After carrying out the calibration of the wide-angle lens, we calculated the correction parameters, and then developed the method that convert the original image-point to new image-point correcting distortion. For authorization the developed algorithm, we had inspection about shape and position; there are approximately 2D RMSE of 3 pixel, cx = 2, and cy = 3 different.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.535-542
• /
• 2012

Adiabatic temperature rise test for predicting heat of hydration in mass concrete is especially inconvenient in the field. In order to overcome the problem, the equipment to effectively and conveniently measure semi-adiabatic temperature change was developed. The main objective of this paper is to propose a new and simple equipment for measuring semi-adiabatic temperature rise by using insulation bottles. In order to predict exact heat loss of concrete using this device, it is required to assume the specific heat loss coefficient of the device by water temperature change inside the experimental device. According to experimental and analytical results, the adiabatic temperature rise does not have significant differences in changes of temperature and humidity of air, as well as initial temperature of water. By comparing adiabatic temperature rise tests, the equipment for measuring semi-adiabatic temperature change can be used to predict the hydration heat of concrete within sufficient accuracy.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.11a
• /
• pp.262-268
• /
• 2002

일반산업 분야의 프로젝트에 비해 소프트웨어 개발 분야에서의 프로젝트는 그 자체 특성상 가시적이고 계량적으로 평가하기 어려웠고 이로 인해 그 동안 국내 업계 및 정부기관에서는 프로젝트 규모 및 비용 산정에 있어서 많은 어려움이 있었다. 다행히도 최근 국제적으로 소프트웨어 프로젝트 측정기준으로 자리잡고 있는 기능점수에 관해서 국내 학계 및 업계에서도 관심을 가지게 되었고 관련된 연구결과도 계속 나오고 있다. 또한, 정부기관을 비롯하여 업계에서도 이러한 연구 결과를 기반으로 소프트웨어 개발비, 유지보수 및 재 개발비의 산정 기준으로 기능점수를 활용하려는 시도가 이루어지고 있다. 이러한 기능점수의 산정에 있어서 프로젝트의 주요 개발 요소인 하드웨어 플랫폼, 개발언어 유형, 대상업무 유형, 개발 납기 등에 따라 보정계수가 다르게 적용되고 있다. 그러나 아직 국내에서는 기능점수로 프로젝트 비용을 산정하기 위한 공감대 및 신뢰도에 대한 확산이 안된 상태이고 이에 따른 분쟁의 소지도 여전히 가지고 있다. 이러한 시점에서 본 논문은 ISBSG(International Software Benchmarking Standards Group)에서 제공하는 그 동안 축적된 해외 프로젝트 개발 결과 데이터를 기초로 기능점수와 프로젝트 개발에 투입되는 주요 개발요소간 관련성 및 프로젝트 개발 요소간의 상관관계를 분석 및 검증하여, 프로젝트 내에서의 기능점수와 관련된 개발요소간의 관련 정도에 대한 통계적 근거를 제시하여 향후 기능점수와 관련해서 이와 유사한 국내 프로젝트 수행 시 벤치마킹 자료로 활용하는데 그 목적이 있다.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.305-319
• /
• 2021

The overseas calibration sites such as Mongolia used for Korea Multi-purpose Satellite (KOMPSAT-5 or K5), have a disadvantage in that maintenance and repair costs are high and immediate response is difficult when an unexpected problem occurs. Accordingly, the necessity of establishing a domestic SAR calibration site was suggested, but the progress of related research is insignificant. In this paper, we investigated what conditions should be satisfied in terms of backscattering characteristics to construct a site for SAR satellite image quality evaluation and calibration. First of all, it was selected first by applying general indicators such as accessibility and availability among places recommended as satellite image calibration candidate sitesin Korea. Next, three places, site A (Goheung-gun, Jeollanam-do), site B (Jeonju-si, Jeollabuk-do), and site C (Daedeok Research Complex, Daejeon), were selected as the final candidates because they are relatively wide and easy to install AT or CR. Site A, located in Goheung-gun, Jeollanam-do, was best considered in terms of slope measurements, minimum site area to obtain ISLR, uniformity of DN values and backscatter coefficients, interference by strong reflectors, and backscatter clutter level.

• Plant Journal
• /
• v.13 no.4
• /
• pp.38-40
• /
• 2017

This study is for stabilization of the water balance of the closed cooling water system. The pipe network analysis program is used for the water balance review, and the resistance factor correction is performed through the field measurement with the ultrasonic flowmeter to improve the reliability of the pipe network software. Based on this, it is aimed to derive optimal driving method through various case simulations.