• KSBB Journal
• /
• v.17 no.6
• /
• pp.543-548
• /
• 2002

The enantioselective esterification of racemic ibuprofen catalyzed by a Candida rugosa lipase was studied according to reaction conditions such as a lipase concentration, reaction temperature, alcohol chain length and alcohol concentration. The S-(+)-ibuprofen alkyl esters prepared were converted to S-(+)-ibuprofen by hydrolysis with sulfuric acid as a catalyst. High conversions in the esterifications were obtained at 60$^{\circ}C$ and an equimolar ratio of octanol to ibuprofen. The initial reaction rate of the esterification decreased with increasing octanol concentration. Conversion and initial reaction rate increased with increasing alcohol chain length. Values of enantiomeric excess(ee) according to esterification reaction conditions did not change below 60$^{\circ}C$. On the other hand, values of conversion and ee for the chemical hydrolysis of S-(+)-ibuprofen alkyl esters were independent of alcohol alkyl chain length. Optical resolution of racemic ibuprofen was achieved by lipase catalyzed esterification and chemical hydrolysis. The separation method provided a high yield and enantioselectivity for the production of S-(+)-ibuprofen from racemic ibuprofen.

• Membrane Journal
• /
• v.17 no.2
• /
• pp.146-160
• /
• 2007

A parametric study on pervaporation-facilitated esterification was performed by using a practical model based on non-perfect separation through membrane which is not perfectly permselective to water. Thus, membrane selectivity as well as membrane capability to remove water should be taken into account in establishing the simulation model to explain how the membrane separation influence the esterification reaction process. It was shown by simulation that in the reaction systems with non-perfect separation, the permeation of reactants which are acid or/and alcohol retards the reaction by inducing the backward reaction so that reaction conversion curve is located between a reaction system coupled with pervaporation process having a perfect permselectivity to water and a reaction system without pervaporation process. The volume change of reaction system occurs as a result of the permeation through the membrane. The reaction volume change which can be characterized by the reaction ratio of $r_{\Psi}\;to\;r_{{\Psi}=1}$ affects reaction kinetics by concentrating reactants and products, respectively, with different extent with time; reactant-concentrating effect is dominant during the initial stage of reaction, resulting in facilitating the reaction, and then product-concentrating effect is exerted more on reaction, causing to slow down the reaction. When pervaporative dehydration is applied to the reaction system plays an important role in the reaction as well. The effect of timing to impose pervaporation on reaction system affected the reaction kinetics in terms of reaction rate and reaction conversion. A relationship was derived to explain membrane unit capacity and reaction parameters that will be used as a design tool to determine membrane unit capacity at a given reaction conditions or reaction parameters at a membrane unit capacity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.250.1-250.1
• /
• 2010

최근 석유공급 불안정성과 이산화탄소 배출 규제 움직임에 대응하기 위한 수단으로 바이오연료의 공급이 전세계적으로 증가하고 있다. 이와 같은 바이오디젤의 보급 활성화는 식물성 기름의 가격 상승과 수급 불안정 문제, 그리고 식량자원과의 충돌 문제를 야기하고 있다. 국내 바이오디젤 생산 원료로 사용되는 대두, 유채, 해바라기, 팜 등은 모두 식용시장과 수급 균형을 형성하고 있어 바이오디젤의 생산이 증가하게 되면 식용 오일 시장의 수급균형이 깨져 오일곡물 가격의 변동을 초래하게 될 것이다. 과거에는 수거비용을 들여 폐기하던 폐식용유 마저 이제는 돈을 주고 구입해야하는 실정에 다다랐다. 바이오디젤 생산비의 70~80%를 차지하는 원료유의 부족 현상에 따라 바이오디젤 업계에서는 soapstock, trapped grease, 폐식용유 등의 저급유지 활용 방안을 강구하고 있으며 자트로파와 같은 비식용 작물의 해외플랜테이션도 진행하고 있다. 본 연구에서는 커피찌거기에 남아 있는 오일을 속슬렛추출장치를 이용해 추출하고 전이에스테르화 반응을 수행하여 반응 특성과 커피오일 바이오디젤의 지방산 조성을 알아보고 바이오디젤 원료유로서의 사용가능성에 대해 알아보았다. 석유에테르를 용매로 속슬렛 추출장치를 이용해 추출시 원료대비 약 17%(w/w)의 오일을 추출할 수 있었다. 추출된 오일의 산가는 18.79mgKOH/g으로 매우 높아 직접 전이에스테르화 반응이 불가능하다. 고체 산 촉매 하에서 전처리 반응을 실시하여 유리지방산을 전환 제거한 후 염기촉매를 이용해 전이에스테르화 반응을 진행한 결과 약 80%의 바이오디젤(FAME) 함량을 얻을 수 있었다. 지방산 조성 분석 결과 리놀레익산(Linoleic acid, C18:2), 올레익산(Oleic acid, C18:1), 팔미틱산(Palmitic acid, C16:0)이 대부분을 차지하며 이 중에서도 리놀레익산이 44.17%로 가장 많은 함량을 보였다. 이는 커피찌꺼기 추출 오일이 바이오디젤 원료유로 활용 가능성을 나타내는 결과로, 색소성분 등의 불순물을 효율적으로 제거하여 증류정제 전단계에서의 바이오디젤 순도와 생산 수율을 증대시키기 위한 추가 연구가 필요한 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.251.1-251.1
• /
• 2010

바이오디젤은 동식물성 기름과 메탄올의 트랜스에스테르화 반응에 의해 생산되는 지방산메틸에스테르(FAME, fatty acid methyl esters)로서, 트랜스에스테르화 공정에는 KOH, NaOH, $NaOCH_3$등의 균질계 화학촉매를 이용한 방법, 무촉매 공정인 초임계 메탄올 이용 방법, 그리고 효소촉매를 이용한 방법이 있다. 초임계 공정은 에너지 소비와 장치비가 커서 경제성이 떨어지는 것으로 보고되며 화학촉매 공정은 반응 효율이 높다는 장점을 가지고 있지만, 반응 및 정제단계가 복잡하고 정제과정에 폐수를 발생시키는 문제점을 가지고 있다. 고정화 효소를 사용하는 효소 공정은 에너지 비용의 절감, 후 처리 공정의 단순화, 고 순도의 글리세롤을 얻을 수 있는 장점이 있지만, 반응 속도가 느리고 효소 가격이 비싸다는 단점이 있어 현재까지 상업화되지 못하고 있다. 반응속도가 높고 재사용이 가능한 효소 촉매 공정 개발을 위해 본 연구에서는 Candida rugosa, Rizhopus oryzae 2종을 실리카에 동시 고정화하였다. 고정화 Lipase의 제조는 실리카겔을 과산화수소를 이용하여 전처리를 하고 Acetone과 3-APTES의 혼합용액을 첨가한 후 실리카겔과 (silanization)을 진행 하였다. 그리고 glutaraldehyde를 첨가 하여 공유 결합을 형성 한 후에 증류수를 사용하여 실리카겔을 회수하여 lipase(Rizhopus oryzae, Candida rugosa 10% 용액)를 고정화 하였다. 고정화 효소의 효소 활성을 측정한 결과 3000-3500 Unit(${\mu}mol/g{\cdot}min$)으로 측정되었다. 제조된 고정화 효소를 이용하여 Canola Oil을 바이오디젤로 전환하는 실험을 진행하였으며 생성물로부터 고정화 효소를 분리한 후에 상층의 에스테르층을 취하여 수세한 뒤 원심분리하여 FAME 함량을 측정한 결과 83%의 바이오디젤을 얻을 수 있었다. 그리고 효소 촉매 트랜스에스테르화 반응의 Enzyme, Water, Methanol 투입량의 반응 변수들에 대하여 반응표면분석법(Response Surface Methodology)을 적용하여 최적 반응조건을 도출하는 연구를 수행하였다.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.155-160
• /
• 2011

An animal fat is an attractive biodiesel energy source for its high stability against oxidation and low incomplete combustion ratio due to the high heating value and cetane value. However, it requires a refinery process because of the high content of saturated acid and impurity which increas the boiling point. In this study, the optimum biodiesel synthetic process of lard is suggested. Indeed, we demonstrate new biodiesel production processes to alter conventional process of heating and mixing by applying ultrasonic energy. While the optimum reaction temperature and mole ratio of methanol and lard, when using conventional mixing and heating process, were $55^{\circ}C$ and 12, respectively, the reaction time were reduced to 30 minutes by applying ultrasonic irradiation power of 500 W. The new process applying ultrasonic irradiation yielded synthetic biodiesel properties as followings: 3.34 cP of the viscosity, 37.0 MJ/kg of the caloric value and below 0.25 mgKOH/g of the acidic value, which satisfy biodiesel quality criteria.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• Clean Technology
• /
• v.30 no.1
• /
• pp.47-54
• /
• 2024

Jatropha oil extracted from the seeds of Nepalese Jatropha curcas, a non-edible crop, was used as a raw material and converted to biodiesel through a two-step process consisting of an esterification reaction and a transesterification reaction. Amberlyst-15 catalyst was applied to the esterification reaction between the free fatty acids contained in the Jatropha oil and methanol. The acid value of the Jatropha oil could be lowered from 11.0 to 0.26 mgKOH/g through esterification. Biodiesel was synthesized through a transesterification reaction between Jatropha oil with an acid value of 0.26 mgKOH/g and methanol over NaOH/γ-Al₂O₃ catalysts. As the loading amount of NaOH increased from 3 to 25 wt%, the specific surface area decreased from 129 to 28 m²/g and the pore volume decreased from 0.249 to 0.129 cm³/g. The amount and intensity of base sites over the NaOH/γ-Al₂O₃ catalysts increased simultaneously with the NaOH loading amount. It was confirmed that the optimal NaOH loading amount for the NaOH/γ-Al₂O₃ catalyst was 12 wt%. The optimal temperature for the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst was selected to be 65 ℃. In the transesterification reaction of Jatropha oil using the NaOH/γ-Al₂O₃ catalyst, the reaction rate was affected by external diffusion limitation when the stirring speed was below 150 RPM, however the external diffusion limitation was negligible at higher stirring speeds.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.67-72
• /
• 2000

PET는 합성섬유, 필름, 음료수병, 성형 플라스틱 등의 다양한 용도를 가지고 있으며 특히 섬유 원료부분에서는 전세계의 약 40%이상을 차지하고 있는 상업적 입장에서 아주 중요한 소재이다.［1］그러나, PET 제조공정은 긴 반응시간과 높은 반응온도, 대용량의 다단계 공정시설을 필요로 하는 대표적인 에너지 다소비 공정으로서 현대의 치열한 고분자 제품의 시장경쟁 상황에서 에너지 투입량 감축을 위한 공정의 해석 및 개발과 그로 인한 생산원가의 절감이 필수적이다. 본 연구에서는 실제 공장에서 사용되는 단일 연속식 직접 에스테르화 반응기(CSTR Direct Esterification Reactor)를 모델링하고 Van Krevelen［2］의 Group contribution method로 계산된 올리고머의 열용량값을 이용하여 에너지 소모량을 계산하였다. 모델링 결과는 모두 실제 공장의 자료와 비교되었으며 가장 제어하기 쉬운 변수에 따른 반응물의 물성과 에너지 소모량을 분석하였다. 또한 압력이 일정한 조건 하에서 입력변화에 따른 반응기의 동적 모델링을 동시에 수행하였으며 투입에너지량과 반응기의 운전지표와의 관계를 분석하였다. 이러한 연구는 실제 공정분석과 최적화에 있어서 소모 에너지량을 고려한 보다 정확한 지표를 제시하고 에너지 사용의 효율성을 높이는 데 기여할 수 있다.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.243-249
• /
• 2005

Esterification of lactic acid with alcohols catalyzed by Amberlyst-type ion exchange resins and sulfuric acid was carried out in a batch reactor with total /or partial recycle of distilled condensates, respectively. The esterification of lactic acid in the total-recycling reactor (n-butanol/lactic acid = 4, $100^{\circ}C$) was promoted by decreasing the residual water and increasing the mole ratio of n-butanol/lactic acid. Also, it was confirmed that methanol with simple structure and tert-butanol with superior substitution reactivity were more effective in increasing the conversion of esterification reaction, compared to ethanol, n-butanol, and iso-butanol. In a partial-recycling reactor (n-butanol/ammonium lactate = 4, $115^{\circ}C$), the conversion of ammonium lactate into butyl lactate with 1.0 wt% Amberyst-type resins was higher in comparison to that with 0.2 mol $H_2SO_4$ (per 1.0 mol ammonium lactate). The esterification was gradually occurred during the initial stage of reaction in the presence of solid catalyst, whereas the initial addition of $H_2SO_4$ did not affect the initial rate of esterification reaction because of ammonium sulfate formation by the neutralizing reaction of ammonium lactate with sulfuric acid.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.395-401
• /
• 2014

In this work, the reaction characteristics for the non-catalytic esterification of palm fatty acid distillate were analyzed. The esterification reaction was assumed as the pseudo homogeneous $2^{nd}$ order reversible reaction and 'reaction effectiveness factor (${\eta}$)' was used to take accounts into evaporation and reaction of water and methanol, which take place simultaneously in the liquid phase. The nonlinear programming was used to derive appropriate kinetic parameters, the reaction rate constant and mass transfer coefficient, minimizing the error between experimental data and the numerical values. Based on these parameters, the apparent activation energy was calculated to be 43.98 kJ/mol.