• Title/Summary/Keyword: 비숙련자

Search Result 161, Processing Time 0.025 seconds

The Efficiency of the Ni-Ti Rotary Files in Curved Simulated Canals Shaped by Novice Operators (만곡모형근관에서 초심자가 근관형성시 Ni-Ti 전동파일의 효용성)

  • Park, Se-Hee;Cho, Kyung-Mo;Kim, Jin-Woo
    • Restorative Dentistry and Endodontics
    • /
    • v.28 no.2
    • /
    • pp.146-155
    • /
    • 2003
  • 여러 가지 장점으로 인해 Ni-Ti 전동 파일을 근관성형에 사용하는 빈도가 점차 증가되는 추세이지만, 초심자를 대상으로 한 연구는 부족한 실정이다. 이에 본 연구에서는 초심자에서 Ni-Ti 전동 파일을 사용할 때 근관 형성의 효용성을 평가하고, 어떤 방법이 초심자에게 적절한지를 알아보고자 하였다. 근관형태가 재현된 레진 블록을 이용하여 12명의 초심자와 4명의 숙련자가 근관 형성을 시행하였다. 각 술자는 ProFile, ProTaper, Hybrid (ProFile+ProTaper)를 이용하여 각각의 레진 블록을 세 개씩 근관형성하고, 각 파일 별의 근관 형성 시간을 기록하였다. 근관 형성 전과 후의 digital 이미지를 중첩하여 치근단으로부터 1, 2, 3, 4, 5, 6, 7mm level에서 근관단면의 총길이 변화량, 만곡 외측의 길이 변화량, 만곡 내측의 길이 변화량, 중심이동량, 중심이동율과 치근단에서의 apical transportation을 구하고, 초심자와 숙련자 사이의 차이를 비교 평가하였다. 실험결과 ProFile군의 1, 3, 5, 6, 7mm level과 ProTaper군의 6mm level, Hybrid군의 3mm level에서 초심자의 근관단면의 총길이 변화량이 숙련자보다 많았다. 모든 군에서 치근단으로부터 4, 5, 6, 7mm level에서는 근관 중심이 만곡내측으로 이동하였고, 1 2, 3mm level 에서는 만곡외측으로 이동하였으나, 숙련자가 시행한 Hybrid군의 3mm level과 비숙련자가 시행한 ProTaper 군의 3mm level에서는 만곡내측으로 이동하였다. 모든 군의 3mm level과 ProFile 군의 5mm level에서 초심자의 중심이동율이 숙련자에 비해 컸으며, 초심자가 ProTaper를 사용시 더 큰 apical trans portation을 보였고, 모든 군에서 초심자가 근관형성시 더 많은 시간이 걸렸다. ProFile과 ProTaper를 이용한 Hybrid technique이 초심자에게 추천되며, 초심자들도 충분히 교육받는다면 만곡된 근관의 근관형성에 있어서 Ni-Ti rotary file의 이용이 가능하리라고 사료된다.

The Comparison of Expert with Non-Expert EMG during Perform Back-round Kicking of Taekwondo (태권도 뒤후려차기 동작시 숙련자와 비숙련자의 근전도 비교)

  • Kim, Jae-Woo
    • The Journal of Korean Institute for Practical Engineering Education
    • /
    • v.3 no.1
    • /
    • pp.200-205
    • /
    • 2011
  • This research is first to analyze an electomygram reaction of the lower limbs among the muscles used during a back-round kicking of Taekwondo, second to analyze the relationship between the muscles of the kicking limb and those of the supporting limb, third to compare EMG activity of expert with novice. Measured muscles are as follows; rectus fermoris which control flexion and stretching of femora and knee joints, vastus medialis and vastus lateralis, which control flexion and stretching of legs, and biceps fermoris, which control stretching of femora, bending of knee joints and abduction of the crus. The electomygram reaction of all these selected muscles were analyzed. Three kicks were performed, and electomygram of each of kicks were measured. Then, electomygram reaction of the best kick was used for electomygram analysis.

  • PDF

Comparison of ROM and Muscle Activities According to the Skills of Surya Namaskara in Vinyasa Yoga (요가 수르야 나마스카 동작의 숙련도 차이에 따른 ROM과 근활성도 비교)

  • Hong, So-Yoen;Park, Jin;Hah, Chong-Ku
    • Korean Journal of Applied Biomechanics
    • /
    • v.19 no.1
    • /
    • pp.127-138
    • /
    • 2009
  • The purpose of this study was to investigate range of motion (ROM) and muscle activities according to the skills of Surya Namaskara in Vinyasa Yoga. Six females (skilled 2, unskilled 4) of university students participated in this experiment. The research factors were ROM and muscle activities for static poses on Surya Namaskara in Vinyasa Yoga. The six infrared cameras (Oqus 300, Qualisys Inc, Sweden) and Zero Wire EMG (Aurion, Italy) were used to acquire raw data, and the Qualisys Track Manager and Noraxon (MyoResearch XP Master Edition, USA) were used to process data. The %MVIC and ROM were analyzed with Visual 3D (C-Motion Inc, USA) and Noraxon. In conclusion, ROM and %MVIC between two groups were remarkable different according to the static poses of Yoga, therefore instructors have to provide step-by-step information that was suitable to themselves (ROM and EMG of poses).

Shade Comparative Analysis of Natural tooth Measured by Visual and Two Colorimeters(ShadeEye®,Shadepilot®) (2종 측색기와 시각을 이용한 자연치아의 색조 비교 분석)

  • An, Jin-Hee;Choi, Mee-Ra;Shim, Hye-Won
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.29 no.1
    • /
    • pp.81-93
    • /
    • 2013
  • The objectives were to evaluate the accuracy of shade selection by human visual system(VS) and 2 different colorimeters ($ShadeEye^{(R)}$(SE) and Shadepilot (SP)). Maxillary anterior teeth of 30 volunteers which had no caries or restorations were included in the study. Firstly, the accordance in shade selection by 3 dentists and 2 colorimeters was investigated. Secondly, the color of the teeth were measured by 1 observer's naked eye and 2 colorimeters under different illumination conditions (Sunny versus cloudy day). Additionally testing of inter-observer variability selected colors by 2 novice and 2 experienced dentists were compared. For comparing visual and 2 different colorimeters, SP(60%) showed significantly highest rate of accordance than the visual (23.3%) or SE (16.7%) and lowest mean ${\Delta}E$ ($2.62{\pm}0.74$ versus $3.83{\pm}1.38$;SE or $4.04{\pm}1.61$;VS)(p<0.001). If accuracy of shade selection were measured using VS, the mean ${\Delta}E$ value of cloudy day was higher than that of sunny day ($4.35{\pm}1.70$ versus $3.53{\pm}1.31$; p<0.001). There were no significant difference of the mean ${\Delta}E$ value between sunny and cloudy day in both SE and SP. Inter- observer repeatability was higher in 2 experienced group (73.3%) than novice group (36.7%). The mean ${\Delta}E$ of experienced group was lower than that of novice group ($3.60{\pm}1.47$ versus $4.70{\pm}1.67$; p<0.001). Colorimeters (SE or SP) is more accurate and more reproducible compared with human shade assessment. Using visual system may be limited by cloudy and inexperience of tester, then more experience and using colorimeters may be helpful of raising the accurate repeatability of shade selection.

A Study on the Arc Control of Welder Based on Fuzzy Logic (퍼지논리에 의한 용접기의 아크제어연구)

  • 송준호;석진욱;조성원
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 1997.10a
    • /
    • pp.194-198
    • /
    • 1997
  • 본 연구는 용접게에 퍼지이론을 적용하여 작업자의 비숙련성 및 용접모재의 형상에 따라 변동되는 아크상태에 항상 일정하게 유지되도록 하는 제어방식ㅇ르 제안한다. 기존의 방식은 작업자 스스로 아크상태를 판단하고 아크길이의 변화를 주었다. 이에 비하여, 퍼지 용접기는 적업자가 기준 용접전압 및 용접전류를 설정한 후, 용접을 할 때 발생하는 아크상태를 숙련자의 경험에 바탕을 둔 퍼지제어기를 이용한다. 그러므로써 퍼지제어기의 출력부가 출력전압을 조절하여 균일한 용접효과가 나오도록 하는데 목적을 두었다.

  • PDF

Differences in Ability to Predict the Success of Motor Action According to Dance Expertise - Focusing on Pirouette En Dehors (무용 숙련성에 따른 동작결과예측 능력의 차이: 삐루엣 앙 디올 동작을 중심으로)

  • Han, Siwan;Ryu, Je-Kwang;Yi, Woojong;Yang, Jonghyun
    • Korean Journal of Cognitive Science
    • /
    • v.29 no.2
    • /
    • pp.121-135
    • /
    • 2018
  • Dancers' motions are perceived by observers through visual processes with visual information forming the basis for the observers' appreciation and evaluation of the dancers' motions. There have been many discussions as to whether or not observers' personal athletic capabilities form an essential basis for accurate assessment of the motions of others but, so far, no valid conclusions have been reached. The purpose of this study is to investigate how the ability to predict motions of others varies depending on the athletic expertise of the observers. Participants of this research were ballet dancers of varying athletic expertise. Twenty seven participants were divided into three groups with nine in each: beginners, intermediate experts and experts. The participants watched the same dance video and then evaluated whether the motion would be successful or not. The movement related visual information required to evaluate the success of the motion was systematically adjusted by controlling the length of the video. Using the temporal occlusion method, this study measured the response accuracy of the participants by category of expertise. Under the circumstance with insufficient visual information to utilize, the experts showed higher rates of correct response than the intermediate experts and the beginners. The beginners showed higher rates of wrong response than the experts and the intermediate experts. These results showed that the ability to predict success or failure of a dance motion varied depending on motion expertise of the observers, although they had similar level of expertise in perception. Participants considered to have high athletic expertise showed high prediction ability on the result of the motion. In addition, high expertise in perception reduced the likelihood that participants would make hasty responses under the circumstance with insufficient information and helped to reduce wrong response rate. In conclusion, this study showed that motor expertise and perceptual expertise contribute to prediction accuracy of observed motions.

Development of real time virtual reality simulating a flying ball using binocular disparity (양안시차를 이용한 외야수 뜬 공 잡기 가상 현실 실시간 시뮬레이터 개발)

  • Son, Hae-Rim;Li, Hyung-Chul O.
    • 한국HCI학회:학술대회논문집
    • /
    • 2006.02b
    • /
    • pp.810-814
    • /
    • 2006
  • 그 동안 개발된 시뮬레이터들은 주로 단안 정보에 기초한 것들이 대부분이었고, 양안 정보를 제공하더라도 사용자의 움직임을 반영하지 못하였다. 양안정보를 제공하지 못하는 시뮬레이터는 게임으로써는 재미에 한계가 있고, 훈련 도구로써 실제 수행에 도움을 주기 어렵다. 본 연구는 사용자의 움직임을 고려한 양안 정보를 제공하는 외야수 뜬 공 잡기 가상 현실 시뮬레이터를 개발하여 이러한 문제점들을 해결할 수 있는 토대를 마련하였다. 그리고 양안 정보 제공의 중요성과 개발된 시뮬레이터의 타당성 및 유용성을 검증하기 위해 본 시뮬레이터를 이용하여 공의 위치 판단 과제를 실시하였다. 양안 시차가 주어진 조건과 주어지지 않은 조건 각각에 두 집단 구성원들을 무선적으로 배치하여 정답률과 반응 시간을 측정하였다. 숙련자들은 양안시차가 주어진 조건에서 더 좋은 수행을 보인 반면, 일반인들은 양안시차가 주어지지 않은 조건에서 더 좋은 수행을 보였다. 이는 뜬 공 잡기 상황에서 양안정보가 숙련자들에게는 유용하지만 비숙련자들에게는 그렇지 않았음을 보여준다. 또한 숙련자들이 정답률과 반응 시간 모두에서 일반인들보다 더 좋은 수행을 보였고 이는 통계적으로 유의미하였다. 이와 같은 가상 현실 시뮬레이터는 양안 정보를 제공함으로써 이전의 시뮬레이터들보다 게임이나 훈련 도구로 사용함에 있어 더 효과적이다. 또한 인간의 운동 수행에 관련된 연구를 하는데 유용하게 사용될 수 있다.

  • PDF

The sensitivity analysis for ergonomic checklists associated with musculoskeletal disorders (근골격계질환 위험도관련 주요 평가도구들에 대한 민감도 분석)

  • Im, Su-Jung;Choi, Soon-Young;Park, Dong-Hyun
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2011.04a
    • /
    • pp.319-328
    • /
    • 2011
  • It has been very important to have an exact evaluation for risk factors in order to prevent MSDs(Musculoskeletal Disorders). However, most MSDs evaluation checklists have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of sensitivity analysis on three major evaluation checklists(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced subjects, analysis for the consistency of the results in terms of different evaluation times. The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced subjects. This might due to the fact that experienced subjects have had better ability to detect the bad working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced subjects., 2) All three checklists showed significantly different results in terms of different evaluation times. Further study on this subject would eventually provide a sophisticated evaluating guidelines for MSDs regarding determination of subject-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

  • PDF

Comparison analysis of rescuer's neck muscle tone and stiffness according to cardiopulmonary resuscitation skill-level

  • Wang, Joong-San;Kim, Jeong-Ja;Jung, Ji-Yun
    • Journal of the Korea Society of Computer and Information
    • /
    • v.26 no.11
    • /
    • pp.165-172
    • /
    • 2021
  • The purpose of this study was to identify differences in the muscle tone and stiffness of neck muscles according to levels of cardiopulmonary resuscitation (CPR) skill. The subjects were 30 female students in their 20s who were divided into a skilled group (n=15) and an unskilled group (n=15). According to the results, the skilled group showed statistically significant decreases in the stiffness of the lower cervical muscle and the muscle tone of the upper trapezius on the above hand side of hand grips after CPR (p<.05). The unskilled group exhibited a statistically significant difference in both the muscle tone and stiffness of the upper trapezius muscle on both sides after CPR (p<.05). However, no statistically significant differences were found between the two groups. In addition, the non-skilled group showed statistically significant lower values than the skilled group in the mean compression rate, total number of compressions, accuracy of chest compression, and accuracy of chest relaxation (p<.05). This study confirmed that CPR has a myophysiological effect on the neck muscles of those who perform CPR. However, it found that no differences result from individual CPR skill levels that are an important element for the accuracy of CPR.

대형 프레스 금형 생산을 위한 자동 공정계획 시스템 개발

  • 손주찬;백종명
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1996.04a
    • /
    • pp.358-361
    • /
    • 1996
  • 공정계획은 숙련된 작업자의 경험의 경험과 지식에 의해서 작성된다. 이러한 과정을 컴퓨터를 활용하여 자동화함으로써 공정계획을 수립하는 시간은 물론 이와 연관된 설계변경, 설비선정, 견적, 재고관리 등 반복적인 업무의 스피드와 정확도를 향상시킬 수 있으며, 비숙련자라도 쉽게 공정을 파악하고 최선의 공정계획을 수립할 수 있다. 자동차 외판제조용 대형 프레스 금형을 대상으로 자동화된 공정계획 시스템을 구현하기 위해 비공식 또는 공식으로 일어나고 있는 공정에 관한 지식을 수집, 분석하여 금형의 패턴과 형구, 부품, 사양으로 분류하여 표준화하였고, 이를 기반으로 공정계획을 컴퓨터가 자동으로 생성할 수 있도록 공정에 관한 Knowledge를 Relational Data Model로 표현하였다. 자동공정계획 시스템은 단계별 Tree 방식으로서, 각 단계마다 시스템이 제공하는 질의에 대해 설계자 또는 공정계획자가 설계도면을 참고하여 이에 대응하면 해당 금형에 대한 적합한 공정계획과 작업공수가 제시되도록 설계 개발되었다.

  • PDF