• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1613-1622
• /
• 2010

In this paper, the ultraprecision positioning control of an ultrasonic linear motor in a high-vacuum environment is presented. The bolt-clamped Langivin type transducer (BLT) with the 3rd longitudinal; and 6th lateral vibration modes was developed, which was excited by using the Eigen resonance frequency for two vibration modes in order to generate stable and high power. In practical applications, however, even if a geometrical design has an Eigen frequency, discordance between both mode frequencies can be generated by the contact mechanism and because of manufacturing errors as well as environmental factors. Both mode frequencies were precisely matched by adjusting the impedence. By using this method, the BLT can be driven under any environmental conditions. The nominal characteristic trajectory following(NCTF) control method was adopted to control the positioning of the system in vacuum. The developed linear motor stage show high positioning accuracy with 5 nm.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.41-46
• /
• 2015

It is known that in aluminum 6061-T6, which is composed of $Mg_2Si$ and ${\beta}-Al_5FeSi$, void nucleation grows around ${\beta}-Al_5FeSi$ of Al606-T6. In this work, growth of voids was checked by scanning a 6061-T6 specimen with SEM observation. The effects of dislocation damping, coherency strain and voids on ultrasonic attenuation and nonlinearity parameters were experimentally measured. It was observed that a nonlinearity parameter increases until 75 percent of fatigue life and decreases after that. From the results, the authors inferred that dislocation damping and coherency damping increase nonlinearity parameters and void nucleation decreases them as ultrasonic scattering increases with void. The application of nonlinearity parameters in estimating degradation of materials with complex microstructures through fatigue process, therefore, should be carefully considered.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.403-406
• /
• 2000

파라메트릭 송파 방식을 공기중에서의 음향 변환기에 적용시키기 위한 검토로써, 비교적 공진 주파수가 낮은 기중 초음파 발생 소자를 이용하여 파라메트릭 송파기를 제작하였다. 실험에서는 송파기로서 공진주파수 38.6kHz를 갖는 음원을 제작하여 이용하였다. 비선형 왜곡으로부터 파라메트릭 어레이에 의한 차주 파수가 발생함을 알아보기 위하여 1kHz의 차주파수를 갖도록 38.1kHz와 39.1kHz의 1차파를 신호발생기로부터 인가하고 마이크로폰을 사용하여 수신하였다. 공기중에서 파라메트릭 효과의 확인을 통하여 파라메트릭 송파기에서 방사되는 1차파와 전파경로중에서 생성하는 2차파의 거동을 이론면에서 고찰하고, 실험 결과와의 비교 검토를 행하여 기중 파라메트릭 송파기 개발의 가능성을 검토하여 보았다.

• Journal of radiological science and technology
• /
• v.24 no.1
• /
• pp.43-48
• /
• 2001

This study deals with the relationship between the magnitude of ultrasonic nonlinear parameter B/A, and sound speed of amount of fat present in biological media to measure B/A system using a wide band ultrasonic transducer. To represent this case, mixtures of egg whites and egg yolk were studied. Even though the differences in density and sound speed of the two egg components were in the range of 1%, B/A increase parabolically as a function of the fat density, which is not in agreement with the Yoshizumi et al's suggestion. In skim milk that does not contain fat, both the B/A and the sound speed increase with the solubility. It is considered that protein could affect these values.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1916-1924
• /
• 1990

In this paper attenuation effect on the measurement and the tomography of nonlinear parameter is discussed. We perform computer simulation with the method using harmonic components and the method using secondary wave components, and then estimate attenuation effect through the results and compare two measurement techniques. According to simulation result the attenuation effect is more intensive as large n and \ulcorner, and the degree of the attenuation effect is represented as error functions. In the aspect of measuremnet techniques, the method using secondary wave components is more insensitive to attenuation effect than the method using harmonic compnents. We obtain the same result in the nonlinear tomography, and show that the attenuation compensive filter is required because the whole tomogram is affected by frequency dependent attenuation(or nonlinear attenuation)

• Journal of Biomedical Engineering Research
• /
• v.11 no.1
• /
• pp.121-130
• /
• 1990

In this study, the coefficients of ultrasound attenuation for human liver were determined in 6 normal humans and in 38 patients with diffuse liver disease. The coefficients with linear frequency dependency as well as nonlinear frequency dependency were evaluated. Gaussian pulse propagating in a lossy medium suffers downshifting of a center frequency and decreasing in the bandwidth. Such changes in frequency domain spectrum were quantified in terms of changes in the attenuation coefficients with nonlinear dependency, which in turn improve clinical Implications of the coefficients. Statistical analysis shows that the attenuation coefficients evaluated with nonlinear dependency reflect an improved accuracy for the diffuse liver disease than those with linear dependency. The discriminant analysis also indicate the improved classification with nonlinear dependency(75%) than with linear dependency(61%).

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.53-60
• /
• 1996

In the conventional linear elasticity, sound speed is determined by only elastic modulus and density of the medium. In actual, however, sound speed depends on the stress and this dependency becomes nonlinear as the stress increases. These phenomena can be introducing nonlinear elastic modulus. In this paper, relationships between nonlinear elastic modulus up to 4th order and the internal status of materials are discussed through computer simulations and experiments. For the measurement of sound speed, a new type of measurement system using ultrasonic wave is proposed on the basis of ultrasonic pulse echo method which has been generally used in nondestructive ultrasonic test equipment. In order to confirm the stress dependency of sound speed, several experiments are carried out for alumina specimen.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1145-1152
• /
• 2011

This study was conducted to estimate genetic effects on economically important traits for genetic improvement in Hanwoo by using the real-time ultrasound measurements for longissimus dorsi muscle area (LMA), backfat thickness (BFT), and marbling score (Marb). The phenotypic data were obtained from 1,648 pedigreed cows, and general linear models were applied to test the effects of age, region, and body condition socre. The cows between 50 and 60 months of age had the greatest scores for LMA and BFT, and Marb (P<0.05). The cows in region C had the greatest scores for body condition socre, LMA and BFT, while in region J Marb was the lowest (P<0.05). There was positive relation with LMA, BFT, and Marb according to increase body condition socre. Heritabilities for LMA, BFT, and Marb were estimated as 0.136, 0.351, and 0.236, respectively. These results would provide primary information for the efficient implementation of genetic improvement schemes in Hanwoo.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2116-2124
• /
• 2001

It's required mechanical properties of in-service facilities to maintain safety operation in power plants as well as chemical plants. In this studdy the four classes of the thermally aged 1Cr-lMo-0.25V specimens were prepared using an artificially accelerated aging method at 630$\^{C}$. Ultrasonic tests, tensile tests, K$\_$IC/ tests and hardness tests were performed in order to evaluate the degree of degradation of the material. The mechanical properties were decreased as degraded, but the attenuation coefficient and the harmonic generation level of a ultrasonic signal were increased. Expecially the nonlinear parameter derived from the harmonic generation level is sensitive and will be a good parameter to evaluate the material degradation.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.61-69
• /
• 2008

Diagnosis of breast ultrasound is better than mammography in the early detection of breast cancer, but, it is difficult to detect microcalcification. We studied on detection for calcification of breast tissue using acoustic resonance and power doppler with 7.5 MHz linear probe in breast ultrasound. We first constructed breast tissue phantom made of gelatin and saw breast, and then observed calcification by the change of external vibration. Calcification injected breast tissue phantom visualized the difference for brightness and region of color in ROI regions of power doppler. Acoustic resonance almost never visualized in low frequency regions, plateau constituted in about 300-400 Hz and colors vanished according to the increase of frequency.