• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.813-820
• /
• 2010

The vertical roller mill is important for machine grinding and mixing various crude materials in the process of producing Portland cement. A vertical roller mill is subjected to cyclic bending stress because of the roller load. Because of the cyclic bending stress, only $4{\times}10^6-8{\times}10^6$ cycles are achieved instead of $4{\times}10^7$ cycles. The stress also causes fractures at the edge of grinding path of the outer roller. The expenses incurred in repairing the grinding path amounts to 30% of the total maintenance cost. Therefore, it is desirable to redesign the vertical roller mill in order to reduce the expenses incurred in repairing the roller. In this study, artificial neural networks (ANNs) were applied in order to solve the multiobjective optimization problem for vertical roller mills by using the function approximation ability of ANNs. To learn and generalize ANNs, the maximum and minimum stresses were estimated from the results of the finite-element analysis of a vertical roller mill. Thus, ANNs could be applied to solve the multiobjective optimization problem.

• Water for future
• /
• v.24 no.4
• /
• pp.41-48
• /
• 1991

This paper describes the characteristics of tidal currents in the Gamag Bay by using the two-dimensional nonlinear hydrodynamic euation. The basic equations are derived by Navier-Stokes momentum equation and continuity equation and its characteristics critically are reviewed, and they are analysed by the implicit finite difference method. The numerical model is constructed two-dimensional(depth-averaged) simple layer model. This paper investigates the stability of solution and convergence of solution in application of the method to Gamag Bay, and the reproducibility of the simulation is also discussed in comparison with the results of field survey. The following items are clarifide through the numerical investigation; i)the reproduc-ibility of tidal range and currents are quite acceptable, comparing with the results of model tests and field data, and ii) tidal cycle for convergent solution is four tidal cycle, also, iii) bottom friction is successfully represented as c=(1/n))$h^{1/6}$.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.447-457
• /
• 2018

In this study, a two-dimensional fully nonlinear transient wave numerical tank was developed using a desingularized indirect boundary integral equation method. The desingularized indirect boundary integral equation method is simpler and faster than the conventional boundary element method because special treatment is not required to compute the boundary integral. Numerical simulations were carried out in the time domain using the fourth order Runge-Kutta method. A mixed Eulerian-Lagrangian approach was adapted to reconstruct the free surface at each time step. A numerical damping zone was used to minimize the reflective wave in the downstream region. The interpolating method of a Gaussian radial basis function-type artificial neural network was used to calculate the gradient of the free surface elevation without element connectivity. The desingularized indirect boundary integral equation using an isolated point source and radial basis function has no need for information about the element connectivity and is a meshless method that is numerically more flexible. In order to validate the accuracy of the numerical wave tank based on the desingularized indirect boundary integral equation method and meshless technique, several numerical simulations were carried out. First, a comparison with numerical results according to the type of desingularized source was carried out and confirmed that continuous line sources can be replaced by simply isolated sources. In addition, a propagation simulation of a $2^{nd}$-order Stokes wave was carried out and compared with an analytical solution. Finally, simulations of propagating waves in shallow water and propagating waves over a submerged bar were also carried and compared with published data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.241-253
• /
• 2009

This study performs the investigation of a long-term variation of annual maximum surge heights(AMSH) and main characteristics of high surge events, and the statistical evaluation of the AMSH using sea level data at Yeosu and Tongyeong tidal stations over more than 30 years. It is found that the long-term uptrends based on the linear regression in the AMSH are 34.5 cm/34 yr at Yeosu and 33.6 cm/31 yr at Tongyeong, which are relatively much higher than those at Sokcho and Mukho in the Eastern Coast. 71% and 68% of the AMSH occur during typhoon's event in Yeosu and Tongyeong tidal stations, respectively, and the highest surge records are mostly produced by the typhoon. The generalized extreme value distribution taking into account of the time variable is applied to detect time trend in annual maximum surge heights. In addition, Gumbel distribution is checked to find which one is best fitted to the data using likelihood ratio test. The return level and its 90% confidence interval are obtained for the statistical prediction of the future trend. The prevention of the growing storm surge damage by the intensified typhoon requires the steady analysis and prediction of the surge events associated with the climate change.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.474-485
• /
• 2014

Temporal and spatial variations of temperature and salinity around Ganjeol Point during January, April, August and November 2011 were studied using the data from CTD observations and temperature monitoring buoys deployed at 20 stations in the southeast coast of Korea. Temperature and salinity were nearly homogeneous through the whole depth by mixing of the seawater in spring and winter related to the sea surface cooling. Stratification induced by the river runoff and the bottom cold water was clear in summer. In autumn, sea water had vertical mixing initiated from surface layer and weak stratification at the middle and bottom layers. Low temperature and high salinity emerged throughout the year near Ganjeol Point, which inferred from turbulent mixing and upwelling by its topographical effect. Major periods of 1/4~1.4 day temperature fluctuations were recorded for the most part of the stations. According to the cross spectral density analysis, high coherence and small time lag for temperature fluctuation between layers were shown at Ganjeol Point. However, those features at the northen area of Hoeya river were opposed to Ganjeol Point. From analyses, thermohaline structure and its fluctuation around Ganjeol Point were characterized into those three parts, the south of Ganjeol Point, Ganjeol Point and the north of Ganjeol Point.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.332-341
• /
• 1992

한반도 주변의 정규적인 해양관측 효시는 1910년대로부터 시작된다. 1915년 6월부 터 원산, 부산 등 12개 항구의 중앙부에서 10일 간격으로 해양관측이 시작되었으며, 1916년 7월부터는 거문도 해야 어청도 등 10개 등대관측소에서 연안정지관측을 역일로 시작했고, 1917년 5월부터 정선해양관측이 이루어 졌는데 이들은 총독부 수산과에서 수산시험조사사업의 일환으로 수행되었고 1921년부터 총독부수산 시험장에서 이들을 더욱 발전다. 1930년대에는 정선해양관측이 매월 초순 각 도별로 수항되어 가장 훌륭 한 관측결과가 생산되었다. 1961년부터는 항구관측을 폐지하고 연안정지관측과 정선해 양관측만 이루어 지고 있으며 해양조사선을 20여개로 수정하여 2개월마다 조사에 임하 고 있다. 이들은 기본적으로 해양생물자원의 경제적 획득에 목적을 두고 있으나 자료 를 널리 공개하여 전세계의 어느 해양연구자들도 이용할 수 있도록 하고 있다. 1960년 부터는 우리 나라 연안의 조석관측도 연속적으로 수행되고 있다. 1990년 현재 21개 정 선해양관측자료와 42개의 연안정지관측자료, 매일의 표면수온분포도 21개의 평균해면 자료가 공개적으로 이용가능하다. 앞으로 유명한 연구소일수록 해양관측자료를 공개하 여 공동이용할 수 있어야 하며 해양관측의 활성화를 위해 첫째 해양관측기구를 소모품 으로 취급할 것이 요구되고, 둘째 관측선 요원의 정당한 처우가 이루어져야 하며, 셋 째 세계적인 해양조사 사업은 국가기관에서 더욱 성실히 수행될 수 있도록 여건을 조 성할 필요가 있다. 과거에는 어업활동을 위해 해양조사가 현재에는 기후변동연구에 중 요한 자료로도 이용되고 있으므로 우리는 우리주변의 해양관측을 미래학문의 기초자료 로 끊임없이 수행해야 할 중차대한 임무를 지니고 있다.는 대체로 Weddell Sea쪽에서 남동쪽으로 가면서 증가하며, 영 양염 농도가 낮은 얼음 녹은 물의 유입이 얼룩소 a의 농도를 감소시키는 것으로 사료 된다.되어, 경기만에서 출현하는 식물플랑크톤이 서해 중동부 연안수역에서 출현하는 식물 플랑크톤보다 상대적으로 낮은 광에 적응되어 있었다. the most important in the global optimum analysis because small variation of it results in the large change of the objective function, the sum of squares of deviations of the observed and computed groundwater levels. 본 논문에서는 가파른 산사면에서 산사태의 발생을 예측하기 위한 수문학적 인 지하수 흐름 모델을 개발하였다. 이 모델은 물리적인 개념에 기본하였으며, Lumped-parameter를 이용하였다. 개발된 지하수 흐름 모델은 두 모델을 조합하여 구성되어 있으며, 비포화대 흐름을 위해서는 수정된 abcd 모델을, 포화대 흐름에 대해서는 시간 지체 효과를 고려할 수 있는 선형 저수지 모델을 이용하였다. 지하수 흐름 모델은 토층의 두께, 산사면의 경사각, 포화투수계수, 잠재 증발산 량과 같은 불확실한 상수들과 a, b, c, 그리고 K와 같은 자유모델변수들을 가진다. 자유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard 알고리즘을 사용하였다. 서울 구로구 시흥동 산사태 발생 지역의 산사면에 대하여 개발된 모델을 적용하여 예제 해석을 수행함으로써, 지하수 흐름 모델이 산사태 발생 예측을 위하여 이용할 수 있음을 입증하였다.