• Title/Summary/Keyword: 비산발생

Search Result 278, Processing Time 0.029 seconds

Establishment of mobile roadside fine dust monitoring system (이동형 도로변 미세먼지 모니터링 시스템 구축)

  • Kim, Han-Na;Kim, Si-Eung;Kim, Hyeok-Jung
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2021.07a
    • /
    • pp.703-704
    • /
    • 2021
  • 도로변에서 발생하는 미세먼지와 비산먼지는 인체에 각종 질병을 유발하는 발암물질로 알려져 있다. 본 논문에서는 효율적인 도로변 미세먼지의 농도를 측정을 위해 소형차량을 이용한 이동형 미세먼지 모니터링 시스템을 제안한다. 이 시스템은 기존의 대형차량의 운행으로 발행하는 미세먼지 사각지대를 해소하고, 고품질의 보급형 센서를 탑재하여 경제성을 제고한다. 또한, 미세먼지 측정 차량은 이동 중에도 실시간으로 측정가능하다. 이번 연구를 통해 미세먼지 측정 차량을 운행한 결과 도로변 상황을 즉각적으로 반영하는 결과를 나타내었다. 이러한 미세먼지 농도는 미세먼지 저감 및 관리를 위한 기초정보로 사용될 것을 기대한다.

  • PDF

Computation of Underground Storm Water Storage Facilities Volume for Reducing the Flood Damage in Urban Area (도시침수저감을 위한 지하저류조 용량 산정)

  • Han, Kun-Yeun;Son, In-Ho;Lee, Sang-Yeob;Im, Jae-Tae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1007-1011
    • /
    • 2009
  • 도시지역에 있어서 홍수피해의 직접적인 원인으로는 외수의 범람에 의한 침수와 내수 배제 불량에 의한 침수피해로 구분할 수 있는데 최근 도시지역에 발생하는 홍수피해의 대부분은 외수의 직접 범람에 의한 피해보다는 각종 수리구조물의 배제능력 부족이나 방류지점에서의 배수위의 영향으로 인한 내수의 배제 불량에 기인한 피해가 증가하는 추세이다. 또한 최근 도시지역에 홍수피해를 유발하고 있는 강우의 특징은 단시간에 많은 강우가 집중하여 발생하는 국지성 집중호우로 단시간 내에 수공구조물의 기능을 마비시킴으로써 침수피해를 가중시키는 경향이 있으므로 배수시설 설계 시 이러한 강우의 특성과 도시유출 특성에 대한 고려가 요구되며 중요 시설물에 대해서는 설계빈도의 상향조정이 필요하다. 본 연구에서는 기존 도시유역에 적용되고 있는 강우-유출모형의 기본이론의 장 단점을 검토하여 본 연구의 목적과 용도에 가장 적합하다고 판단되는 SWMM 모형을 선정하여 적용하였다. 대구 서구 비산 7동 배수구역의 유출모의를 실시한바, 향후 경제적 편익을 고려하고, 정확한 실측 유량자료 값을 산정, 관거 내 유속을 방해하는 토사 등 보다 정확한 관거자료, 모의에 사용하는 각종 매개 변수값의 정확도를 높인다면 인위적인 배수계통을 가지는 도시유역에서의 각종 풍수해에 피해를 최소화 할 수 있는 보다 합리적인 방재대책 수립에 큰 도움을 줄 것으로 판단된다.

  • PDF

A Case of Application-blasting in the Urban Blasting Works (도심지 터파기를 위한 응용발파 시공 사례)

  • Kim, Taihyun;Park, Yongwon;Cho, Raehun;Kim, Hongyool;Jeong, Byungho
    • Explosives and Blasting
    • /
    • v.34 no.2
    • /
    • pp.18-30
    • /
    • 2016
  • A drill & blasting method using explosives is the most efficient way to break the rock in the urban projects. However, the blasting method cause vibration, noise and fly-rock as blast pollutions so that blasting wroks are restricted by adjacent structures such as apartment and residence houses. To conduct blasting works at near structures, the numbers of blast-holes a blast and the size of the blast are limited by kinds of detonators and initiation methods. So, the production rate is reduced and the construction period should be increased. Therefore, in this case the deck-charge blasting methods using available detonators in domestic market were designed and evaluated in order to confirm the application possibilities in specific urban sites.

A Hybrid Approach for Grid Artifacts Suppression in X-ray Image (X-ray 영상에서 그리드 아티팩트 제거를 위한 복합형 기법)

  • Kim, Hyewon;Kim, Kyongwoo;Kim, Hyunggyu;Jung, Joongeun;Park, Joonhyuk;Kim, Donghyun;Kim, Hojoon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2019.10a
    • /
    • pp.907-910
    • /
    • 2019
  • 본 연구에서는 X-ray 영상에서 비산란 그리드 장치의 영향으로 인한 아티팩트를 제거하기 위하여 이산코사인변환(DCT: discrete cosine transform) 기반의 주파수 분석 기법과 딥러닝 네트워크의 학습 기법을 상호 보완적으로 결합하는 방법론을 제안한다. 피사체의 특성에 따라 다양하게 나타나는 그리드 라인의 억제 기능을 학습하기 위하여 서로 다른 특성을 반영하는 3 종류의 학습데이터를 생성한다. 학습에 사용되는 그리드 라인 영상의 타겟 데이터를 산출하기 위하여 DCT 기반의 밴드스톱 필터링 기법을 사용하였으며 학습데이터의 양적인 부족을 해결하기 위하여 패치 기반의 학습 방법을 적용하였다. 제안된 방법에 대해 기존의 방법과 비교하여 피사체 경계선 영역에서 발생하는 성능저하 현상, 분할의 가장자리에서 발생하는 블로킹 현상, 배경 영상에서의 성능저하 현상 등을 상대적으로 개선할 수 있음을 실험적으로 평가하였다.

Optimization of Arc-Start Performance by Digital Controlled Wire Feeding System (디지털 제어형 와이어 송급 시스템에서의 Arc-Start 성능 최적화)

  • Ryu, Gyeong-Su;Kim, Dong-Cheol;Kang, Mun-Jin;Rhee, Se-Hun
    • Proceedings of the KWS Conference
    • /
    • 2009.11a
    • /
    • pp.21-21
    • /
    • 2009
  • 현장의 GMA 용접기는 일반적으로 용접기 본체로부터 와이어 송급장치까지의 거리가 약 50m 정도 떨어져 있고 송급장치로부터 토치까지의 거리는 약 3~5m 정도이다. 특히 국산 GMA 용접기의 와이어 송급장치는 DC 모터의 일종인 프린트모터를 사용하고 있으며 제어기는 오픈루프 제어를 하고 있다. 따라서 와이어 송급속도의 변동을 보상할 수 있는 어떤 수단도 장착되어 있지 않다. 또한 송급장치와 토치간 와이어를 안내하는 케이블 도관의 마찰 때문에 토치 끝단에서의 와이어 송급속도가 불규칙해질 수밖에 없다. 용접 시 와이어 송급속도의 순간적인 변동 때문에 용접부의 전류 파형이 매우 불규칙해지고 이 때문에 용융된 용적이 용융풀로 이행하지 못하고 스패터로 비산하는 현상을 발생시킨다. 본 연구에서는 이를 해결하고자 국산 SCR 용접기 및 인버터 용접기와 호환 가능한 디지털 제어형 와이어 송급장치와 Push-Pull 용접 토치를 개발하였다. 또한, 개발된 시스템을 이용하여 정 역 방향 제어기술을 적용하였고 아크 발생 시의 스패터 최소화 공정을 제안하였다. 실험은 SM490A 강재를 사용하여 BOP(Bead On Plate) 용접을 실행하였다. 용접 중 LabVIEW를 이용하여 아크 발생 초기 전류, 전압 그리고 와이어 송급속도를 측정하였고, 고속 카메라를 이용하여 용접현상을 분석하였다. 본 연구를 통해 아크 발생 초기의 스패터를 최소화하는 공정을 도출할 수 있었다. 용접공정 변수인 아크 발생 초기의 와이어 송급속도, 와이어의 역송급 진행거리 그리고 역송급 판단 시점의 용접 전류 값은 실험을 통해 얻을 수 있었다. 또한, 이 연구를 통해 개발된 시스템의 성능을 평가하였다.

  • PDF

Simple Method to Discriminate the Fungicide Resistant Botrytis cinerea Strain in Tomatoes (토마토 잿빛곰팡이병균 약제저항성 간이 판별법)

  • Lee, Mun Haeng;Lee, Hee Kyoung;Kim, Sung Eun;Lee, Hwan Gu;Lee, Sun Gye;Yu, Seung Hun;Kim, Young Shik;Kim, Sang Woo;Lee, Youn Su
    • The Korean Journal of Mycology
    • /
    • v.41 no.3
    • /
    • pp.172-180
    • /
    • 2013
  • Grey mold infection rate in tomato was investigated with the inoculation of dead flowers on Botrytis selective media. The grey mold infection rate of flower after fruiting were higher in the order of after 45 days, after 25 days, and fruiting day with 100%, 87% and 65%, respectively. The number of infected flowers were increased with time increase after the flowering before fruiting. BSM (Botrytis selective medium) was used to check grey mold infection rate depending on the flowering stage and cultivar. Grey mold infection rate depending on the flowering stage was similar in all the beef-tomato cultivar as 1.5~5% at preflowering, 1.5~45% at flowering and 75~90% at fruiting. On the other hand, cherry tomato cultivar "KoKo" had lower infection rates of 0~3.5% at pre-flowering, 10~30% at flowering and 20~50% at fruiting. These resulted from the fact that beaf-tomato cultivar have much bigger flowers and larger amount of pollens compared to those of cherry tomato cultivar. The amounts of falling pollens of Botrytis spp. were checked for beaf-tomato cultivar and cherry tomato cultivar using BSTM. The amounts of falling pollens were increased as growth period was extended, and the amount of spores increased rapidly during the outbreak of grey mold. Twelve field trials in Buyeo and Iksan areas showed that Fluazinam, and Diethofencarb+Carbendazim were effective fungicides to control tomato grey mold, and these results were similar to those of field trials with BSTM. This is the first report of Fluazinam as a effective fungicide for the control of grey mold of tomato even though it has not been registered yet for the control of gray mold in tomato.

Effect on nitrogen removal in the intermittent aeration system with the anaerobic archaea added (혐기성 아키아 주입이 간헐폭기 시스템에서 질소제거에 미치는 영향)

  • Lee, Sang-Hyung;Park, Noh-Back;Park, Sang-Min;Jun, Hang-Bae
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.11
    • /
    • pp.1186-1192
    • /
    • 2005
  • The relationship between bacteria and anaerobic archaea, sludge yield coefficient and nitrogen removal rate were investigated in intermittent aeration systems(I/A) with added archaea, I/A and conventional activated sludge system. As the archaea solution was added to the I/A reactor, organic removal rate as well as nitrogen removal rate increased. Also, sludge production rate in I/A system added the archaea was maintained lower than other systems because sludge yield coefficient was decreased due to the role of anaerobic archaea such as anaerobic degradation of organics. The experimental data supported the possibility of symbiotic activated sludge system with anaerobic archaea under intermittent aeration, leading to the enhanced nitrogen removal. Crucial results to be presented are: 1) specific oxygen utilization rate(SOUR) of the I/A-arch system was $2.9\;mg-O_2/(g-VSS{\cdot}min)$. SOUR and nitrification rate of the sludge from the I/A-arch system was higher than those from the I/A and A/S reactors. 2) Removal efficiencies of $TCOD_{Cr}$ in the I/A-arch, I/A and A/S reactors were 93, 90 and 87%, respectively. 3) Nitrification occurred successfully in each reactor, while denitrification rate was much higher in the I/A-arch reactor. Efficiencies of TN removal in the I/A-arch, I/A and A/S reactors were 75, 63 and 33%, respectively.

Extraction and Accuracy Assessment of Deforestation Area using GIS and Remotely Sensed Data (GIS와 원격탐사자료를 이용한 산림전용지 추출 및 정확도 평가)

  • Lee, Gihaeng;Lee, Jungsoo
    • Journal of Korean Society of Forest Science
    • /
    • v.101 no.3
    • /
    • pp.365-373
    • /
    • 2012
  • This study purposed to extract and assess the accuracy of assessment for deforestation area in Wonju city using medium resolution satellite image. The total size of deforestation area during the last nine years (2000-2008) was about 467 ha, and it was occurred annually about 52 ha. The most frequent form of deforestation was settlements (72%). Ninety percent of the size of deforestation was less than 2 ha in size. In addition, 79 percent of deforestation area was found within 500 m from the road network and within 100 m of the Forest/Non-forest boundary. This study compared the deforestation based on the administrative information (GIS deforestationI) with the deforestation (RS deforestation) extracted from the satellite imagery by vegetation indices (NDVI, NBR, NDWI). Extraction accuracy, mean-standard deviation${\times}1.5$ applied 3 by 3 filtering, showed reliable accuracy 35.47% k-value 0.20. However, error could be occurred because of the difference of land-use change and land-cover change. The actual rate of land-cover change deforestation area was 32% on administrative information. The 7.52% of forest management activities area was misjudged as deforestation by RS deforestation. Finally, the comparison of land-cover change deforestation (GIS deforestationII) with the RS deforestation accuracy, as a result NDVI mean-standard deviation${\times}2$ applied 3 by 3 filtering, showed improved accuracy 61.23%, k-value 0.23.

A Study on Estimating Air Pullution in the Port of Incheon (인천항의 대기오염물질 배출량 산정 연구)

  • Lee, Jeong-Uk;Lee, Hyang-Suk
    • Journal of Korea Port Economic Association
    • /
    • v.37 no.1
    • /
    • pp.143-157
    • /
    • 2021
  • International organizations such as the World Health Organization, the Organization for Economic Development and Cooperation, and major developed countries recognize the seriousness of air pollution. International organizations such as the International Maritime Organization have also implemented various regulations to reduce air pollution from ships. In line with this international trend, the government has also enacted a special law on improving air quality in port areas, and is making efforts to reduce air pollution caused by ports. The purpose of the Special Act is to implement comprehensive policies to improve air quality in port areas. This study sought to identify the emissions of each source of air pollutants originating from the port and prepare basic data on setting the policy priorities. To this end, the analysis was conducted in six categories: ships, vehicles, loading and unloading equipment, railways, unloading/wild ash dust, road ash dust, and the methodology presented by the European Environment Agency(EEA) and the United States Environmental Protection Agency(EPA). The pollutants subject to analysis were analyzed for carbon monoxide(CO), nitrogen oxides (NOX), sulfur oxides(SOX), total airborne materials(TSP), particulate matter(PM10, PM2.5), and ammonia(NH3). The analysis showed a total of 7,122 tons of emissions. By substance, NOX accounted for the largest portion of 5,084 tons, followed by CO (984 tons), SOX (530 tons), and TSP (335 tons). By source of emissions, ships accounted for the largest portion with 4,107 tons, followed by vehicles with 2,622 tons, showing high emissions. This proved to be the main cause of port air pollution, with 57.6% and 36.8% of total emissions, respectively, suggesting the need for countermeasures against these sources.

A Study on the Fine Dust Removal Equipment of Pressurized Water type for the Removal of Exhaust Gas Fine Dust and Volatile Organic Compounds from the Non-industrial combustion plant (비산업 연소 사업장 배출 가스상 미세먼지와 휘발성 유기 화합물 제거를 위한 가압수식 미세먼지 제거 장치 연구)

  • Youn, Jae-Seo;Kim, Sang-Min;Lee, Ye-Ji;Noh, Seong-Yeo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.11
    • /
    • pp.506-512
    • /
    • 2018
  • The fine dust generated in the home and restaurant business occupies a low ratio of about 4% of the total fine dust emissions. However, at the foodservice business, the rate of change of the pollutant concentration is very high, so that the temporary fine dust concentration can be measured up to 60 times. The pollutants generated from non-industrial combustion plants consist of particulate fine dust and gaseous organic compounds. To remove these pollutants, cleaning dust collection system, which is an effective system for simultaneous removal of gaseous and particulate matter, is applied. This is a method of increasing the probability of diffusion capture of the Brownian motion by pressurized liquid injection method using the atomizing nozzle. The dust removal efficiency of the fine dust collecting system was analyzed by nozzle spraying air pressure condition and angle using the manufactured fine dust removing system. As a result, it was confirmed that the efficiency of removal of fine dust and gaseous organic compounds was more than 90%. The developed system is expected to be highly usable in the future because it can remove particulate dust from the existing plant hood system without any installation cost.