• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.3-13
• /
• 2014

After The Industrial Revolution in 18th century, constructions were done with universal material (concrete) in everywhere instead of using materials that are produced in each country because of development of industry material and transportation. This change caused the buildings to become trite with no local characteristics. Hereupon, the study intends to understand the essence of matter and restore various construction methods of each matter with the topic of 'Immateriality'. Immateriality is the revealed concept based on Materiality. Consequently the process and characteristics of immateriality shown on the works of Kuma Kengo and Herzog & de Meuron, three kinds of features can be found of immateriality expression mode. They are as in the following. First, there is a mode of transforming the shape and properties in physical or psychological way by observer. Second, there is a mode of conflating the shape and properties in physical or psychological way by observer. Third, there is a mode of mixing the shape and properties in physical or psychological way by observer.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.193-197
• /
• 2001

본 연구에서는 국산닥, 태국닥, 중국닥의 원료를 사용하여 펄핑, 표백, 고해, 초지, 건조의 방식을 변화시켜 총 3500 여장에 이르는 한지를 한지제조 전문가가 일정한 방법에 따라 제 조하였고 그 특정들을 조직적으로 검토하였다. 이러한 연구는 한지의 물성이 닥섬유의 처 리공정에 의해 어떻게 영향을 받는지 연구를 통계적으로 가능하게 하였다. 본 연구에서는 육재펄핑과 일광표백의 효과, 외발뜨기와 쌍발뜨기의 효과, 고해방식의 차이, 먹퍼집성에 대 해 결과들을 보이 고 있다. 육재 펄핑과 일광표백이 한지의 물성에 어떠한 영향을 미치는지 알아보기로 하였다. 현 재는 많은 한지 업자들이 육재펄핑보다는 가성소다 펄핑 (그림에서는 약품펄핑으로 표기), 일광표백보다는 차아염소산 나트륨 (그림에서는 약품표백으로 표기)을 사용하는 것이 보통 이다. 육재펄핑과 일광표백을 실시한 한지는 열단장, 인열강도, 내절도를 약품펄핑이나 약 품표백보다 높이는 효과가 있음을 알 수 있었다. 하지만 약품을 사용하는 경우 리그닌의 용출이 더 수윌하므로 백색도는 약품을 사용하는 경우가 더 유리하였다. 국산닥의 경우 육 재펄핑과 일광표백을 한 경우 먹퍼짐성이 약품사용 한지보다 크지 않음을 볼 수 있었다. 한국의 전통적인 외발뜨기 초지방식은 일본의 쌍발뜨기 방식에 비해 많은 물리적 우수성 을 보이고 있다. 외발뜨기가 쌍발뜨기에 비해 열단장, 신장율, 인열지수 및 내절도 모두가 우수함을 잘 보이고 있다. 섬유의 성질과 관련하여 전체적으로 조명해 보면, 열단장, 인열 지수는 국산닥이 가장 높으며, 내절도는 태국닥이 우수하였고, 중국닥의 경우 모두 매우 불 량함을 알 수 있다. 이것은 아마도 처리중에 과도한 표백을 실시하지 아니하였는가 하는 의구심을 들게한다. 열단장과 신장율 역시 국산닥이 우수하였다. 글씨를 쓸 때, 붓이 나가 는 정도를 마찰게수로 짐작해 보았다. 동 마찰계수와 정 마찰계수는 국산닥이 낮은 편이였 다. 마찰계수가 낮다는 사실은 한지의 표면이 더 매끄럽다고 표현될 수 있는데, 역시 국산닥 으로 제조한 한지가 붓이 나가는데 유리하지 않을까 하는 추측을 할 수 있다. 본 실험결과 는 한지 사용자들의 느낌과 상관관계를 얻어내어서 확인해야 할 것이다. 닥방망이로의 고해나 칼비터에 의한 고해나 큰 물성적으로 큰 차이를 보이지는 않고 있 었다. 단지 섬유의 차이가 고해방식의 차이보다 월등히 크다는 사실을 보이고 있다 이러한 점은 섬유장의 길이에서도 볼 수 있다. 칼비터가 섬유를 절단하기만 하고 닥방망이 고해가 섬유장의 변화를 일으키지 않는다면 틀림없이 평균 섬유장의 차이가 생길것이다.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.3
• /
• pp.117-125
• /
• 2023

In the development of clothing design through virtual simulation, it is essential to minimize the differences between the virtual and the real world as much as possible. The most critical task to enhance the similarity between virtual and real garments is to find simulation parameters that can closely emulate the physical properties of the actual fabric in use. The simulation parameter optimization process requires manual tuning by experts, demanding high expertise and a significant amount of time. Especially, considerable time is consumed in repeatedly running simulations to check the results of applying the tuned simulation parameters. Recently, to tackle this issue, artificial neural network learning models have been proposed that swiftly estimate the results of drape test simulations, which are predominantly used for parameter tuning. In these earlier studies, relatively simple linear stiffness models were used, and instead of estimating the entirety of the drape mesh, they estimated only a portion of the mesh and interpolated the rest. However, there is still a scarcity of research on non-linear stiffness models, which are commonly used in actual garment design. In this paper, we propose a learning model for estimating the results of drape simulations for non-linear stiffness models. Our learning model estimates the full high-resolution mesh model of drape. To validate the performance of the proposed method, experiments were conducted using three different drape test methods, demonstrating high accuracy in estimation.