• 대한기계학회논문집A
• /
• 제40권10호
• /
• pp.873-878
• /
• 2016

컨트롤 밸브용 SCM415강은 밸브케이스와 밸브의 지속적인 운동을 통해 마멸이 발생한다. 마멸은 밸브의 성능을 저하시키고, 사용 수명을 단축시킨다. 본 논문은 컨트롤 밸브용 모재 및 침탄 처리된 SCM415강에 대하여 마멸 특성을 평가하였다. 마멸 시험은 다양한 온도 및 하중에서 왕복동 마모시험기를 이용하여 수행되었으며, 마멸량, 비마멸율 및 마찰계수를 분석하였다. 마멸 메커니즘은 SEM을 통하여 분석하였다. 마멸량에 대한 하중과 온도의 교호작용은 MINITAB을 이용한 분산분석을 수행하였다.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.464-471
• /
• 2000

The fracture and wear behavior of dental composite resins containing prepolymerized particle fillers were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of prepolymerized particle fillers in fracture and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than those of Metafil and Heliomolar at the same experimental condition. It was found that the main wear mechanism was abrasive wear containing of plastic deformation of dental material.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.791-799
• /
• 1997

The wear characteristics and wear mechanisms of plasma sprayed Al/sub 2/ O/sub 3/-40%TiO/sub 2/ and Cr/sub 2/O/sub 3/ deposited on casting aluminum alloy(AC4C) were investigated. Specimens were processed for various coating thicknesses. Ball on disk type wear tester was used for wear test. The scratch test on plasma sprayed coating surface showed that critical load to break the coating layer was greater than 40 N. The critical load increase with the increase of coating thickness of specimens. The friction coefficient of Cr/sub 2/O/sub 3/ coating layer was less than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. The wear resistance of Cr/sub 2/O/sub 3/ coating layer was greater than that of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer. Microscopic observation of worn surfaces was made by SEM. SEM observation showed that the main mechanism of wear for Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer was abrasive wear under 50 N. For the case of Al/sub 2/O/sub 3/-40%TiO/sub 2/ coating layer, as the surface cracks perpendicular to sliding direction propagated, the wear debris was generated in wear track. However, the main mechanism of wear for Cr/sub 2/O/sub 3/ coating layer was brittle fracture under 150 N.