• Journal of Internet Computing and Services
• /
• v.15 no.5
• /
• pp.123-132
• /
• 2014

Internet is composed of many independent networks referred to as Internet Service Providers (ISPs) and each provider is generally interconnected based on a commercial agreement. Though many countries are engaged in deregulation in internet interconnection, there is still debate whether the large ISPs are unwilling to peer with small providers, have incentives to lower the quality of data transmission of transit operators or set the interconnection charge regarding the actual costs incurred by the interconnection. Korean government introduced regulations in internet interconnection after observing noticeable anti-competitive behaviors from 2005. This paper analyzes whether there is margin squeeze problem/market concentration, and suggests political proposals in Korean regulation status.

• Environmental and Resource Economics Review
• /
• v.22 no.4
• /
• pp.643-670
• /
• 2013

This study analyzed the impact of crude oil inventory while gasoline price adjusts to international crude oil price(WTI) fluctuations. We mainly focused on asymmetric relationship between crude oil and petroleum product prices and added oil inventory as an variable, using the error correction model which is based on Borenstein et al.(1997). This paper selected the sample period from January 1988 to December 2012, analyzed the asymmetry of each intervals and the influence of crude oil inventory to the degree of asymmetry changes, both full period and five years period respectively. The results showed that when considering crude oil inventory, existence and degrees of time amount asymmetry varies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.7-8
• /
• 2010

The temperature development of a structural element is dependent on section factor, which is estimated as a ratio of the fire-exposed perimeter to the cross-section area. Hence, with the higher section factor, the faster temperature development of the section os observed. Composite beam member, partially embedded asymmetry H beam, has a good fire resistance to the cross-section. The study was intended to conduct with change with section factor. The experimental result of section type which the Slim Beam Floor is bottom flange reinforced method.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.11-18
• /
• 1997

By utilizing the technique to monitor the DC cell node voltages through circuit simulation, degradation of the static read operating margin In high load-resistor SRAM cell was examined, which is caused by parasitic resistances and transistor asymmetries in this cell structure. By selectively adding the parasitic resistances to an ideal cell, the influence of each parasitic resistance on the operating margin was examined, and then the cases with parasitic resistances in pairs were also examined. By selectively changing the channel width of cell transistors to generate cell asymmetry, the influence of cell asymmetry on the operating margin was also examined. Analyses on the operating margins were performed by comparing the supply voltage values at which two cell node voltages merge to a single value and the differences of cell node voltages at VDD=5V in the simulated node voltage characteristics. By determining the parasitic resistances and the transistor asymmetries which give the most serious effect on the static read-operation of SRAM cell from this analysis based on circuit simulated, a criteria was provided, which can be referred in the design of new SRAM cell structures.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2009

Hearing impaired person's hearing loss has personally various shape, so existing symmetrical auditory filter of frequency band method wasn't properly simulated the hearing impaired person's various hearing loss shape. The shapes of auditory filter are asymmetrical different with each center frequency and each input level. Hearing impaired person which has hearing loss was differently changed with that of normal hearing people and it has different value for speech of quality through auditory filter. In this study, the asymmetrical auditory filter was simulated and then some tests to estimate the filter's performance objectively were performed. The experiment as simulated auditory filter's performance evaluation method used perceptual evaluation of speech quality (PESQ) and log likelihood ratio (LLR) for speech through auditory filter. In the test, processed speech was evaluated objective speech quality and distortion using PESQ and LLR value. When hearing loss processed, PESQ and LLR value have big difference between symmetrical and asymmetrical auditory filter. It means that the difference of the shape auditory filter may affect to speech quality. Especially, when hearing loss existed, auditory filter changing according to asymmetrical shape for each center frequency affected to perceive speech quality of the hearing impaired.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.138-138
• /
• 2009

Cr과 Zr의 segments(Cr:Zr= 50:50 vol.%)로 구성되어진 단일타겟을 이용하여 CrZrN 박막을 합성하였다. CrZrN 박막은 비대칭 마그테트론 스퍼터링법을 이용하였으며, 공정조건 중 질소분압을 변화시켜 CrZrN 박막을 합성하였다. 질소분압 변화에 따른 CrZrN 박막의 기계적, 화학적 특성들의 변화를 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.200-201
• /
• 2017

무선전력전송 시스템의 전력 수신부는 많은 경우 송신부에 비해 크기가 작으므로 자계결합 에너지링크 코일의 권선을 비대칭으로 설계할 필요가 있다. 본 논문은 직렬 공진 보상 구조의 자계결합 무선전력전송에서 에너지링크 전압이득과 전력전송효율을 동시에 고려해 전력변환회로 관점에서의 비대칭 코일의 도식적인 분석 및 설계 방법을 제안한다. 제안하는 설계평면을 통해 에너지링크 코일의 정렬이 어긋날 때 혹은 부하요구가 변할 때 에너지링크의 전압이득과 전력전송효율 변화를 직관적으로 예측할 수 있으며 주어진 설계조건에 따라 에너지 링크를 간단히 설계할 수 있다. 본 제안방법은 회로 시뮬레이션을 통해 검증 되었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.483-489
• /
• 2002

The computer simulation has been done for non-insulated and insulated pipes which are vacant or half filled with liquid. The simulation results showed that the density profile on the radiography is continuous and symmetrical around the center of pipe in the case of vacant pipe. On the other hand the density profiles are not symmetrical and depend on geometrical setting for radiography in the case of half filled pipes. Finally, experimental testing on a non-insulated carbon steel pipe with artificial notches of different depth is carried out using Ir-192 and industrial film. Comparing the measured density profile on the radiograph to the calculated one, it has been shown that it is possible to evaluate thickness variation by measuring density profile on a radiograph.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2002

In this study the modal characteristics and responses of an asymmetric structure with added viscoelastic dampers were investigated for design parameters such as eccentricity of stiffness and added dampers, the loss factor of the damping materials used. For modal characteristics, variation of the quantities such as natural frequencies, modal damping ratios, modal participation factors, and dynamic amplification factors were observed, and displacements at flexible and stiff edges, and at center of mass were obtained. Based on the results, the problem of the optimum damper distribution to minimize the torsional effects was addressed, and the proposed method for optimum damper distribution was applied to a multi-story structure to verify the applicability Finally the effect of viscous and viscoelastic dampers were compared by varying the loss factor of the viscoelastic material.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.547-557
• /
• 2015

In this study, we synthesized polyimide with high carbon dioxide gas transport property using 2,2-bis(3,4-carboxylphenyl) hexafluoropropane, 2,3,5,6-tetramethyl-1,4-phenylenediamine and poly(ethylene glycol) bis(3-aminopropyl) terminated and then we calculated solubility parameter of synthesized polymer and non-solvent phase separation coefficient to determine proper solvent for preparation of asymmetric membrane, also we measured the viscosity of the polymer solution to check polymer contents in membrane solution and prepare asymmetric membrane with $LiNO_3$ additives. The morphology and gas separation property of membrane prepared by phase separation method was confirmed using Field Emission Scanning Electron Microsope and the single gas permeation measurement apparatus. We confirmed that the carbon dioxide permeance of the membrane increased and the selectivity showed little change with decreasing of the volatile solvent contents.