• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.35-39
• /
• 1993

항공기의 플러터 현상을 예방키 위한 개발시의 주요 공학적 임무로는 플러 터 해석, 풍동 플러터 시험, 실기체에 대한 지상진동시험 및 비행 플러터 시 험이 있다. 이들 업무는 군용 항공기의 경우에는 군사 규격서, 민간 항공기 의 경우는 FAR 규정 등에 항공기 개발 및 개조시에는 필히 수행토록 명시 되어 있으며, 특히 개발항공기의 인증을 받기 위해서는 초도 비행전까지 필 수적으로 완료되어야 하는 업무이다. 이중 항공기 지상진동시험은 개발항공 기의 초도 비행전에 실기체를 대상으로 하는 구조 동특성 규명시험으로써 플러터 해석 모델의 정확도를 입증하고 그 해석모델을 수정하거나 개선시키 는데 필요한 구조의 동특성 변수들을 실험적으로 규명하는 시험이다. 이 시 험은 개발된 항공기의 초도비행허가를 획득하고 비행속도제한을 설정키 위 해서 초도비행 직전에 초도 개발 비행기를 대상으로 필수적으로 수행되어야 하는 필수적 시험이다. 이에 따라 개발된 항공기의 전기체 지상진동시험을 수행하였고, 시험데이터의 모달해석을 하였다. 이 시험을 수행하기 위해 3개 의 가진기를 사용하였고, 모두 159개의 지점에서 주파수응답 함수를 얻었다. 최대 48 채널의 데이터 획득시스템을 사용하였으므로, 네번에 걸쳐 측정위치 를 옮겨 전체데이타를 획득하였다. 지상진동 시험의 최종해석 결과는 유한요 소 모델의 유효성을 검토하는데 사용되었고, 시험 데이타를 이용한 가진응답 해석(Forced Response Analysis)을 통하여 비행플러터 시험시에 사용되는 플러터 가진기의 위치선정 및 가진력의 크기를 결정하는데 이용하였다.ncy)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.169-169
• /
• 1999

최근 산업 플랜트의 공정제어 시스템은 복잡하고 대규모화되어 고장 발생시 경제적 손실과 위험성이 증폭되어 규정된 안정서와 신뢰성 확보가 필수적이라 할 수 있다. 고장검출 및 진단기법은 시스템의 신뢰성을 높이기 위한 효과적인 방안을 연구하는 것으로 현대에 들어서 많은 학자들의 관심을 끌고 있으며 실제 계통에 점차적으로 응용되고 있다. 현재까지 개발된 고장검출 및 진단기법은 사용된 프로세스 모델의 형태, 고장검출 진단 알고리즘에 따라 다양하게 분류 될 수 있으며 일반적으로 사용된 모델에 따라 크게 1) 정량적 모델에 근거한 해석적 기법, 2) 정성적 모델에 근거한 기법, 3) 지식기반 진단 기법으로 구분 할 수 있다. 이중 정량적 모델 기법은 대상계통의 수학적 모델에 근거하여 운전 데이터를 분석함으로서 고장검출 진단을 수행하는 해석적 기법으로서 근본적으로 계통의 정확한 수학적 모델을 요구하므로 불확실성을 포함한 계통 및 비선형성이 강한 계통등에는 적용이 곤란하다. 정성적 모델 및 지식기반 기법은 정량적 진단 기법과는 달리 대상 프로세스에 대한 수학적 모델 대신에 운전자의 경험과 프로세스 변수간의 상호 작용 및 고장의 전파과정, 고장원인과 증상과의 직접적인 관계에 대한 구조적 지식에 근거한 것으로 고장원인에 대한 계통의 동작을 추론 할 수 있으며, 상황 변화에 따른 영향을 예측할 수 있다. 본 논문에서는 정성적 모델 및 지식기반 기법에 근거한 고장검출 및 진단 기술을 화력 발전소 보일로 프로세스에 적용하여 정성적 시뮬레이션에 의한 설비의 고장을 조기에 발견하여 고장 파급으로 인한 발전 정지 및 설비의 손상 확대를 방지하고 고장 발생시 신속한 원인 규명 및 후속 조치관련 정보들을 운전원에게 제공할 목적으로 현재 전력원에서 개발중인 지능형 경보시스템에 대하여 기술하고자 한다.음과 같이 설명하였다. 서로 상반되는 것들이 다음과 같이 설명하였다. 서로 상반되는 것들이 부딛힘이 없이 공존하고 일상의 논리가 무시된다. 부정, 의심이 없고 확실한 것이 없다. 한 대상에 가졌던 생각이 다른 대상에 옮겨간다(displacement). 한 대상이 여러 대상이 갖고 있는 의미를 함축하고 있다(condensation). 시각적인 순서가 무시된다. 마음속의 생각과 외부의 실제적인 일을 구분하지 못한다. 시간 상의 순서가 있다가 없다가 한다. 차례로 일어나야 할 일이 동시에 한꺼번에 일어난다. 대상들이 서로 비슷해지고 동시에 있을 수 없는 대상들이 함께 나타난다. 사고의 정상적인 구조가 와해된다. Matte-Blance는 무의식에서는 여러 독립된 대상들간의 구분을 없애며, 주체와 객체를 하나로 보려는 대칭화(symmetrization)의 경향이 있기 때문에 이런 변화가 생긴다고 하였다. 또 대칭화가 진행되면 무한대의 느낌을 갖게 되어, 전지(moniscience), 전능(omnipotence), 무력감(impotence), 이상화(idealization)가 나타난다. 그러나 무의식에 대칭화만 있는 것은 아니며, 의식의 사고양식인 비대칭도 어느 정도 나타나며, 대칭화의 정도에 따라, 대상들이 잘 구분되어 있는 단계, 의식수준의 감정단계, 집단 내에서의 대칭화 단계, 집단간에서의 대칭화 단계, 구분이 없어지는 단계로 구분하였다.systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and "global perspective" to workflow architectural discussions. The vocabulary suggested here

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.63-78
• /
• 2017

The purpose of this study is to determine the optimal aggregation interval to increase the reliability when estimating representative value of individual vehicle travel time collected by DSRC equipment in interrupted traffic flow section in National Highway. For this, we use the bimodal asymmetric distribution data, which is the distribution of the most representative individual vehicle travel time collected in the interrupted traffic flow section, and estimate the MSE(Mean Square Error) according to the variation of the aggregation interval of individual vehicle travel time, and determine the optimal aggregation interval. The estimation equation for the MSE estimation utilizes the maximum estimation error equation of t-distribution that can be used in asymmetric distribution. For the analysis of optimal aggregation interval size, the aggregation interval size of individual vehicle travel time was only 3 minutes or more apart from the aggregation interval size of 1-2 minutes in which the collection of data was normally lost due to the signal stop in the interrupted traffic flow section. The aggregation interval that causes the missing part in the data collection causes another error in the missing data correction process and is excluded. As a result, the optimal aggregation interval for the minimum MSE was 3~5 minutes. Considering both the efficiency of the system operation and the improvement of the reliability of calculation of the travel time, it is effective to operate the basic aggregation interval as 5 minutes as usual and to reduce the aggregation interval to 3 minutes in case of congestion.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.119-146
• /
• 2005

This study applies extreme value theory to get extreme value-VAR for Korean Stock market and showed the usefulness of the approach. Block maxima model and POT model were used as extreme value models and tested which model was more appropriate through back testing. It was shown that the block maxima model was unstable as the variation of the estimate was very large depending on the confidence level and the magnitude of the estimates depended largely on the block size. This shows that block maxima model was not appropriate for Korean Stock market. On the other hand POT model was relatively stable even though extreme value VAR depended on the selection of the critical value. Back test also showed VAR showed a better result than delta VAR above 97.5% confidence level. POT model performs better the higher the confidence level, which suggests that POT model is useful as a risk management tool especially for VAR estimates with a confidence level higher than 99%. This study picks up the right tail and left tail of the return distribution and estimates the EVT-VAR for each, which reflects the asymmetry of the return distribution of the Korean Stock market.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.4
• /
• pp.29-39
• /
• 2016

This paper presents the results of 2D and 3D finite element simulations conducted to analyze the effects of excavation depth (H), excavation width (L), and ground condition on the behavior of anchored earth retaining wall in inclined ground layers. The results of numerical analyses are compared with those of the site instrumentation analyses. Based on the results obtained, it appeared that 2D numerical analysis tends to overestimate the horizontal displacement of retaining wall compared to the 3D numerical analysis. When the excavation depth is deeper than 20m, it is found that 2D and 3D numerical analysis results of excavation work in soil ground condition are more different from the results in rock ground condition. For an accurate 3D numerical analysis, applying 3D mesh which has an excavation width twice longer than excavation depth is recommended. Consequently, 3D numerical analysis may be able to offer significantly better predictions of movement than 2D analysis.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.181-190
• /
• 2012

Cost of capital is one of the key factors of accounting regulation policy for telecommunication market. This paper aims at investigating efficient policy improvements concerning accounting regulation for telecommunication market focused on cost of capital calculation methods and its application. At First, cost of capital estimating method should be improved. In estimating the cost of equity capital, it is necessary to use benchmark method for Equity risk premium. It will reduce analytical errors caused by a rapid economic change and inflation. It is also more desirable to use debt premium adding method for the cost of debt capital. Optimal capital structure method may be considered a better way to estimates capital structure. Secondly, cost of capital estimating process also has to be reformed. Telecommunication industry changes rapidly so it does not reflect fast environmental changes. Therefore, cost of capital should be calculated every year. Cost of capital should be calculated by individual companies. There is information asymmetry between regulators and regulatees. Because of that cost of capital calculating process takes long time and cost a lot. To solve this problem, regulator should legislate on cost of capital calculation and then regulating companies report the calculating result. Lastly, major telecommunication companies are all listed now and it is possible to calculating it separately. We must continuously improve the estimating method and application of cost of capital and due to the fast growing of telecommunication industry. The process of determining the calculating method must be discussed and best method chosen.

• Korean Security Journal
• /
• no.14
• /
• pp.517-534
• /
• 2007

Since the beginning of human society, there have always been struggles and competitions for survival and prosperity, terrorism is not a recent phenomenon, however in modern times it has progressed to reflect the advances in civilization and power structures. At the time of the 9.11 terrorist attacks in the U.S. A., a new world order was in the process of being established after the breakdown of the Cold War era. The attacks drove both the Western and the Islamic worlds into heightened fear of terrorism and war, which threatened the quality of life of the whole mankind. Through two war campaigns against the Islamic world, it seems the U.S. has been pushing its own militaristic security road map of the Greater Middle East democratic initiative, justifying it as a means to retaliate and eradicate the terrorist threats towards themselves. However, with its five-year lopsided victories that cost the nation almost four thousand military casualties, and the war expenses that could match the Vietnam war, the U.S. does not yet seem to be totally emancipated from the fears of terrorism. Terrorism, in itself, is a means of resisting forced rules a form of alternative competition by the weak against the strong, and a way of expressing a dismissive response against dictatorial ideas or orders which allow for no normal changes. Intrinsically, the nature of terrorism is a reaction opposing power logics. Confronted with the absolute military power of the U.S., the Islamic strategies of terrorism have begun to rapidly evolve into a new stage. The new strategies take advantage of their civilization and circumstances, they train and inspire their front-line fighters on the Internet, and issue their orders through the clandestine network of the Al Qaeda operatives. These spontaneously generated strategies have been gained speed among the second, and third Islamic generations, many of whom are now spread throughout western societies. This represents a failure of the power-driven, one-sided overseas security initiatives by the U.S., and is creating a culture of fear and distrust in western societies. It is feared that the U.S. war campaigns have made the clash of religions far worse than before, and may ever lead to global ethnic separations and large-scale population movements. Eventually, it may result in the terrorist groups, enlarged and secretly supported by the huge sums of oil money, driving all mankind into a series of irreparable catastrophes.

• Journal of the Korean Society of Floral Art and Design
• /
• no.44
• /
• pp.33-51
• /
• 2021

This thesis analyzes the formal characteristics of Dutch flower still life from the 17th century to the early 18th century and looks into the relevance with the Dutch art market from a macro perspective. The 17th Flower Still Life is to represent social hierarchy in that as the imported exotic, recherch items, the flowers were classified in the terms of their rarity and expensiveness. For this intriguing research, the subject is circumscribed to a vase of flowers, which is the quintessence of In the form of various Dutch Flower Still Life. Dutch society in the early 17th century was centered on the civilian class engaged in trade and commerce, which allowed them to purchase art works to show off their wealth, economic benefits and satisfaction of aesthetic tastes. Among them, the popularity of flower still life was related to the concentrated demand for rare flowers from the new continent. Accordingly, exact depiction and sense of the three dimensional manner were highly regarded in the early flower still life. For the tastes of the wealthy citizens who succeeded in business, the identity of flowers and the actual screen were considered as important. However, after the mid 17th century, economic growth in the Netherlands put an end, and the art market was also on a downward path. The demand class of flower still life has gotten farther away from the spirit of businessmen and has changed into city aristocrats who were stable rentiers. Their tastes laid emphasis on subjective sensibility, which meant that aristocratic, asymmetric, and dramatic chiaroscuro were preferred rather than being realistic. Furthermore, in the 18th century illusionistic realism was abandoned as an expression method of the planar characteristics and a new era in the floral still life was ushered with the reinforcement of decorative effect. From this perspective, it is not an exaggeration to say that romanticism, which is thought of as the beginning of Contemporary Art, originated from the aesthetic taste of Dutch civic culture.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1245-1256
• /
• 2014

The physical nature of fatigue shows the considerable amount of scatter from intrinsic and extrinsic factors. In this study, some degradation models, such as the gamma process model, were reviewed in terms of uncertainties associated with the continuous, gradual, and monotonic nature of fatigue crack growth. Statistically varying fatigue crack growth data obtained from Lu and Meeker were used as an example to demonstrate the use of the gamma process model. This model can describe the condition and lifetime as statistical distribution curves whose shapes vary with cycles. From the skewness of the statistical distribution curves, it was confirmed that the median is suitable for being considered as the expected life. The use of the gamma process model enables the optimum replacement period and percentile life to be employed as criteria for preventive maintenance policy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.159-169
• /
• 2014

Panfacial fractures require complex multidisciplinary approaches for treatment. Functional stability of bilateral condylar-disc complex should be the goal of the treatment. A patient with complex clinical panfacial fractures, including a bilateral condylar fractures visited our clinic. Facial asymmetry, insufficient vertical space and multiple missing teeth of the patient were major problems. Closed reduction and splint treatment were tried for stable condylar position. A functional and esthetic rehabilitation was accomplished by using implants and full mouth rehabilitaion. Potential possibilities of unstable occlusion should be prevented with night guard and periodic occlusal adjustment.