• Title/Summary/Keyword: 비대칭적 변화

Search Result 426, Processing Time 0.035 seconds

Comparison of Hydrolysis from In Vitro Digestion Using Symmetric and Asymmetric Triacylglycerol Compounds by Enzymatic Interesterification (효소적으로 합성된 대칭형과 비대칭형 Triacylglycerol 혼합물의 In Vitro Digestion에서의 소화율 비교)

  • Woo, Jeong Min;Lee, Ki Teak
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.6
    • /
    • pp.842-853
    • /
    • 2014
  • For developing indigestible lipids, symmetric triacylglycerol (ST) and asymmetric triacylglycerol (AT) were produced by enzymatic interesterification using high oleic sunflower oil, palmitic ethyl ester, and stearic ethyl ester in a shaking water bath. Used enzymes were Lipozyme RMIM for ST and Lipozyme TLIM for AT. To remove ethyl ester from reactants, methanol fractionation (reactant : methanol=1:5, w/v, $25^{\circ}C$) and florisil separation (reactant : florisil=1:8, w/w) were applied. Acetone fractionation (reactant : acetone=1:9, w/v) was implemented to separate triacylglcerol (TAG) species into ST and AT. Fractions I (before fractionation), II (after fractionation, liquid phase) and III (after fractionation, solid phase) were separated from ST, whereas fractions IV (after 1st fractionation, liquid phase) and V (after 2nd fractionation, solid phase) were from AT. From sn-2 fatty acid composition analysis, the sum of palmitic acid (C16:0) and stearic acid (C18:0) was 4.9~6.5 area% in ST (I, II, III), and 41.9~43.9 area% in AT (IV, V). In vitro digestion was performed for 0, 15, 30, 60, and 120 minutes at $37^{\circ}C$ in a shaking water bath. For the digestion results, hydrolysis of V was only 40% compared to others (I, II, III, IV) at 120 minutes due to its melting point ($49^{\circ}C$). However, initially (15 minutes), hydrolysis (%) was as follows: V$32.5^{\circ}C$, $31.8^{\circ}C$) and different slip melting points ($31.3^{\circ}C$, $19.5^{\circ}C$). Even though IV has a lower TAG content composed of two saturated fatty acids than III, it had a similar melting point.

The Study of Transmission Speed Analysis In Multimedia Access Network by Environmental Variation (단말의 환경변수에 의한 멀티미디어 가입자망의 전송속도 분석에 관한 연구)

  • Kim, Hyoung-Bae;Park, In-Jung;Chae, Soo-Ik;Park, Dong-Sun;Song, Sang-Seob;Lee, Jae-Jin
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.38 no.7
    • /
    • pp.1-5
    • /
    • 2001
  • This study accomplish comparison and analysis multimedia access network speed configuration which is effected by different environmental variation. For this testing. Not only LAN configuration which is symmetric network, But also the ADSL which is asymmetric network is tested by network speed checking software which is designed by our lab in a 10BaseT environment. In the case of TCP receive speed, we find out the network speed is changed according to bands of network to 90% of CPU load. Also, If the TCP receive windows's size became 2 times rate more than MTU, it reduced the relation of speed rate.

  • PDF

Asymmetrical Role of Left and Right Eyes in 3-D Contents Production (3-D 영상 제작 시 고려돼야 할 좌우 눈의 비대칭적인 역할)

  • Lim, Jae-A;Nam, Jong-Ho
    • Journal of Broadcast Engineering
    • /
    • v.19 no.4
    • /
    • pp.478-490
    • /
    • 2014
  • In order to make 3-D display technique a better tool to provide viewers with realistic stereoscopic experience, various researches have been done in the many relevant fields. This psychophysical study was designed to investigate whether there was any difference in the perceptual processing between a dominant and non-dominant eye when a 3-D cue was provided exclusively to only one eye. We measured the reaction time for detecting a depth change by providing the viewer's each eyes with differential 3-D stimuli, which have systematical patterns. We obtained that there was a consistent 3-D perceptual performance when the 3-D cue was provided to the viewers' left eye regardless of their eye dominance. The result suggests that it might be a better technique to arrange the camera for left eye to carry 3-D cues to get the viewer's consistent 3-D perception.

The Effect of Occlusal Stabilization Splint Therapy on the Occlusal Contact Stability and Masticatory muscle Activities in the Patients with Temporomandibular Disorders (측두하악장애환자에 있어서 교합안정장치가 교합안정성 및 저작근활성에 미치는 영향)

  • Jye-Jynn Ann;Jae-Kap Choi;Jae-Hyun Sung
    • Journal of Oral Medicine and Pain
    • /
    • v.17 no.1
    • /
    • pp.73-87
    • /
    • 1992
  • 저자는 28명의 측두하악장애 환자와 31명의 정상인을 대상으로 최적기능교합의 개념에 입각하여 교합시의 치아접촉점을 동적이며 정량적인 방법으로 평가하여 교합안정장치의 사용으로 인한 교합안정성의 개선여부를 알아보고자 하였다. 이와 동시에 교근과 전측두근의 활성도를 측정하여 치료의 경과에 따른 근활성의 변화를 알아보기 위해 본 연구를 시행하였다. 측정항목은 개구범위, 두개하악장애지수, 치아접촉점 좌우균형치, 치아접촉점 전후균형치, 치아접촉점 평균시간간격, 치아접촉점의 개수, 접촉시간, 좌우측 교근과 좌우측 전측두근의 근활성, 근활성 비대칭 지수 등이었다. 이의 측정을 위해 T-Scan System, K-6 Diagnostic System 그리고 EM 2등을 사용하였으며 얻어진 자료에 대해 검정한 후 다음과 같은 결론을 얻었다. 1. 교합안정장치를 이용하여 측두하악장애 환자들을 4주간 치료한 결과 전반적인 임상증상이 호전되어 개구범위와 두개하악장애지수에 있어서 뚜렷한 개선이 있었다. 2. 측두하악장애 환자에서 최대 악물기시의 치아접촉점 좌우균형치및 평균시간 간격이 큰 것으로 나타나 치아접촉이 일어나는 순간의 교합안정성이 좋지 않은 것으로 평가되었다. 3. 치료 4주후 교하안정장치를 장착한 상태에서 측정한 치아접촉점 좌우균형치및 치아접촉점 평균시간간격은 치료전에 비해 개선된 것으로 나타났다. 4. 치료 4주후 치아접촉점의 전후방 분포가 구치부위로 이동되는 양상을 보였다. 5. 측두하악장애 환자에서 최대 악물기시의 좌우측 교근 및 전측두슨의 근활성은 정상인에 비해 낮에 나타났으며, 이는 치료기간 동안 감소되는 경향을 나타내었다. 6. 측두하악장애 환자에서 전측두근의 근활성 비대칭지수는 정상인에 비해 상당히 높게 나타났으며 이는 치료기간 동안 감소되는 경향을 나타내었다.

  • PDF

Analysis of Cracking Characteristics with Indenter Geometry Using Cohesive Zone Model (Cohesive Zone Model을 이용한 압입자 형상에 따른 균열특성분석)

  • Hyun, Hong Chul;Lee, Jin Haeng;Lee, Hyungyil;Kim, Dae Hyun;Hahn, Jun Hee
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.12
    • /
    • pp.1453-1463
    • /
    • 2013
  • In this study, we investigated the effect of the indenter geometry on the crack characteristics by indentation cracking test and FEA. We conducted various cohesive finite element simulations based on the findings of Lee et al. (2012), who examined the effect of cohesive model parameters on crack size and formulated conditions for crack initiation and propagation. First, we verified the FE model through comparisons with experimental results that were obtained from Berkovich and Vickers indentations. We observed whether nonsymmetrical cracks formed beneath the surface during Berkovich indentation via FEA. Finally, we examined the relation between the crack size and the number of cracks. Based on this relation and the effect of the indenter angle on the crack size, we can predict from the crack size obtained with an indenter of one shape (such as Berkovich or Vickers) the crack size for an indenter of different shape.

Comparison of Univariate Kriging Algorithms for GIS-based Thematic Mapping with Ground Survey Data (현장 조사 자료를 이용한 GIS 기반 주제도 작성을 위한 단변량 크리깅 기법의 비교)

  • Park, No-Wook
    • Korean Journal of Remote Sensing
    • /
    • v.25 no.4
    • /
    • pp.321-338
    • /
    • 2009
  • The objective of this paper is to compare spatial prediction capabilities of univariate kriging algorithms for generating GIS-based thematic maps from ground survey data with asymmetric distributions. Four univariate kriging algorithms including traditional ordinary kriging, three non-linear transform-based kriging algorithms such as log-normal kriging, multi-Gaussian kriging and indicator kriging are applied for spatial interpolation of geochemical As and Pb elements. Cross validation based on a leave-one-out approach is applied and then prediction errors are computed. The impact of the sampling density of the ground survey data on the prediction errors are also investigated. Through the case study, indicator kriging showed the smallest prediction errors and superior prediction capabilities of very low and very high values. Other non-linear transform based kriging algorithms yielded better prediction capabilities than traditional ordinary kriging. Log-normal kriging which has been widely applied, however, produced biased estimation results (overall, overestimation). It is expected that such quantitative comparison results would be effectively used for the selection of an optimal kriging algorithm for spatial interpolation of ground survey data with asymmetric distributions.

A Study of hydrodynamic characteristics in the Hyeongsan River estuary using a Particle Tracking Method (입자추적법을 이용한 형산강하구의 계절별 수리특성 변화 연구)

  • Kim, Dong Hyeon;Hwang, Jin Hwan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.67-67
    • /
    • 2021
  • 하구에서의 흐름은 하천의 담수와 바다에서부터 유입되는 염수, 조석, 파랑 등으로 인해 복잡한 흐름구조와 혼합 양상을 보인다. 특히 만 내에 하천이 있을 경우 만의 해류특성은 하구에서의 혼합과 이송에 지배적인 영향을 미치며, 하천에서부터 방류되는 입자들은 만의 해류특성 따라 만에서의 체류시간과 이송이 결정된다. 잔차류 특성에 의한 순 물질 플럭스의 방향과 조석비대칭에 따른 하구에서의 퇴적 형태들이 결정되며, 이로 인해 하구에서의 퇴적물 퇴적 및 물질의 집적 위치, 하구 인근과 만에서의 환경변화에 영향을 줄 수 있다. 따라서 만 내에서의 혼합과 입자의 이송확산, 하천 담수의 영향역 등과 같은 만과 하천의 흐름 특성을 이해하는 것은 연안 및 하구의 환경 및 관리에 중요하다. 본 연구에서는 영일만과 형산강을 대상으로 계절변화에 따른 영일만 내 흐름과 형산강 하구에서의 퇴적양상에 대해 수치모의를 통해 수행하였다. 수치모델로는 천수방정식으로 준 3차원 유동해석을 하는 Delft-3D Flow와 파랑모형인 SWAN 모델을 결합하여 형산강 하구와 영일만의 유동을 해석하였다. 상류개방경계는 형산강하구 9 km, 하류개방경계는 영일만 외해 50 km로 설정하였고, 경계조건은 대상지역의 관측소 자료와 전지구 모형자료를 결합하여 구성하였다. 또한, 라그랑쥬 입자추적모델을 통해 형산강 상류에서 유입한 입자들의 영일만 내 체류 시간과 집적 위치를 평가하였다.

  • PDF

The Effect of Non Magnetic ion Substitution for the FeCr2-xMxS4(M=Ga, In) by Mossbauer Spectroscopy (비자성 이온 Ga, In이 치환된 유화물 스피넬의 뫼스바우어 분광학 연구)

  • Son, Bae-Soon;Kim, Sam-Jin;Kim, Chul-Sung
    • Journal of the Korean Magnetics Society
    • /
    • v.16 no.1
    • /
    • pp.6-10
    • /
    • 2006
  • The sulphur spinel $FeCr_{2-x}M_xS_4$(M=Ga, In) have been studied with Mossbauer spectroscopy, x-ray diffraction (XRD), and vibrating sample magnetometer. The XRB patterns for samples $FeCr_{2-x}M_xS_4$(M=Ga, In: x=0.1, 0.3) reveal a single phase, which the Ga and In ions are partially occupied to the tetrahedral (A) site. The Neel temperature for the Ga substituted samples increases from 180 to 188 K, with increase from x=0.1 to 0.3. While, it decreases from 173 to 160 K, for the In substituted samples of the x=0.1 and 0.3, respectively. The Mossbauer spectra were collected from 4.2 K to room temperature. We have analyzed the Mossbauer spectra using eight Lorentzian lines fitting method for the $FeCr_{2-x}In_xS_4$(x=0.1) at 4.2 K, yielding the 1311owing results; $H_{hf}=146.0kOe,\;{\Delta}E_Q=1.88mm/s,\;\theta=36^{\circ},\;\phi=0^{\circ},\;\eta=0.6$, and R=1.9. The Ga ions enter into the both sites octahedral (B) and tetrahedral (A), simultaneously the same amounts of Fe ions migrate from the A to the B site, this result is an agreement with XRD results, too. The ${\Delta}E_Q$ of the A and B site in Mossbauer spectra of the samples $FeCr_{2-x}Ga_xS_4$(x=0.3) are 0.83 and 2.94mm/s, respectively. While they are 0.56 and 2.36mm/s for the $FeCr_{2-x}In_xS_4$(x=0.3). It is noticeable that the ${\Delta}E_Q$ for the Ga doped samples are larger than that of the corresponding In doped samples, in spite of the larger ionic radius for In ions. The bond lengths of Cr-S, for the Ga and In doped samples (x=0.3) are found to be 2.41 and $2.43\;{\AA}$, respectively. We interpret that the larger covalence effect from the smaller bond length induces a large asymmetric charge distribution. Finally, it gives a large quadrupole interaction.

Characteristics for the Copper Exchange Reaction by Bentonite Buffer (벤토나이트 완충재의 구리치환 반응 특성)

  • Lee, Seung Yeop;Lee, Ji Young;Jeong, Jongtae;Kim, Kyungsu
    • Journal of the Mineralogical Society of Korea
    • /
    • v.27 no.4
    • /
    • pp.293-299
    • /
    • 2014
  • The bentonite, a buffer material, is essential for the deep geological disposal of HLW (high-level radioactive waste), and it is important to know its characteristic long-term evolution in the underground environment. With an assumption that the concentration of aqueous copper ions will increase if copper-coated materials on a metal canister are corroded, we examined some characteristic ion-exchanges and cation release phenomena occurring in the bentonite clay (montmorillonite) interacted with aqueous Cu cations. During the interaction between dissolved copper and bentonite, Na rather than Ca cations in the expandable clay were preferentially replaced by Cu ions in the experiment. In addition, the Cu-exchanged montmorillonite was characterized by an asymmetric X-ray diffracted pattern with relatively collapsed interlayers compared to the raw sample. These results indicate that the gradual change of the original bentonite property may occur in a underground disposal condition. We are going to further study the characteristic chemical and mineralogical changes of the bentonite buffer to be used for the disposal site by conducting additional experiments.

On the Effect of Air-Simulated Side-Jets on the Aerodynamic Characteristics of a Missile by Multi-Fidelity Modeling (다충실도 모형화를 통한 공기로 모사된 측방제트가 유도무기의 공력특성에 미치는 영향 연구)

  • Kang, Shinseong;Kang, Dayoung;Lee, Kyunghoon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.49 no.2
    • /
    • pp.95-106
    • /
    • 2021
  • Side-jets enable the immediate maneuver of a missile compared to control surfaces; however, they may cause adverse effects on aerodynamic coefficients, for they interfere with freestream. To find out the impact of side-jets on aerodynamic coefficients, we simulate side-jets as air gas and utilize multi-fidelity models to evaluate differences between aerodynamic coefficients obtained with and without side-jets. We computed differences in aerodynamic coefficients to investigate side-jet effects for the changes of a Mach number, a bank angle, and an angle of attack. As a result, asymmetrically developed side-jets affect the longitudinal force and moment coefficients, and the lateral force and moment coefficients drastically change in-between -30 and 30 degrees of bank angles. In contrast, side-jets hardly influence the axial force coefficients. As for the axial moment coefficient, we could not determine the side-jet effect due to a lack of aerodynamic coefficient samples in the Mach number. All in all, we confirm that side-jets lead to the change of a missile attitude as they considerably vary the longitudinal and lateral aerodynamic coefficients.