• Resources Recycling
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2023

Because the application of lithium has gradually increased for the production of lithium ion batteries (LIBs), more research studies about recycling using solvent extraction (SX) should focus on Li⁺ recovery from the waste solution obtained after the removal of the valuable metals nickel, cobalt and manganese (NCM). The raffinate obtained after the removal of NCM metal contains lithium ions and other impurities such as Na ions. In this study, we optimized a selective SX system using di-(2-ethylhexyl) phosphoric acid (D2EHPA) as the extractant and tri-n-butyl phosphate (TBP) as a modifier in kerosene for the recovery of lithium from a waste solution containing lithium and a high concentration of sodium (Li⁺ = 0.5 ~ 1 wt%, Na⁺ = 3 ~6.5 wt%). The extraction of lithium was tested in different solvent compositions and the most effective extraction occurred in the solution composed of 20% D2EHPA + 20% TBP + and 60% kerosene. In this SX system with added NaOH for saponification, more than 95% lithium was selectively extracted in four extraction steps using an organic to aqueous ratio of 5:1 and an equilibrium pH of 4 ~ 4.5. Additionally, most of the Na⁺ (92% by weight) remained in the raffinate. The extracted lithium is stripped using 8 wt% HCl to yield pure lithium chloride with negligible Na content. The lithium chloride is subsequently treated with high purity ammonium bicarbonate to afford lithium carbonate powder. Finally the lithium carbonate is washed with an adequate amount of water to remove trace amounts of sodium resulting in highly pure lithium carbonate powder (purity > 99.2%).

• Resources Recycling
• /
• v.32 no.1
• /
• pp.33-41
• /
• 2023

Herein, we selectively recovered Zn and produced ZnSO₄ from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO₄∙H₂O was obtained by vacuum distillation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.284-292
• /
• 2016

The purpose of this study was to analyze the personal hygiene status of foodservice employees as well as microbiological counts of their hands according to food safety education. A survey was conducted for employees who worked at five foodservice facilities, and the results of the survey were assessed using the SAS program (ver. 9.3). A total of 20 employees' hands were sampled to analyze aerobic plate counts (APCs), coliforms counts (CCs), and Staphylococcus aureus. The food safety education program was composed of four education sessions, including microbiological evaluation of employees' hands. According to the survey results, all employees wore a sanitary uniform, hair cap, and shoes. However, 96% of employees used the restroom wearing sanitary shoes, whereas just 20% of them washed their hands using the standard method. Additionally, employees washed hands after using the restroom (100%), before using single-use gloves (76%), after eating (76%). The results of the microbiological hazards analysis of foodservice employees' hands showed that the average numbers of APCs and CCs before cooking were 5.53 log CFU/hand and 2.95 log CFU/hand respectively, whereas the average numbers of APCs and CCs while cooking at foodservice facilities were 6.49 log CFU/hand and 3.29 log CFU/hand, respectively. Staphylococcus aureus was detected in 10% of their hands before cooking and 5% of their hands while cooking. The average numbers of APCs and CCs were significantly reduced before cooking as well as while cooking, and Staphylococcus aureus was not detected in any of the samples as the frequency of food safety education increased. In conclusion, this study shows that it is necessary for foodservice employees to regularly participate in food safety education with effective instruments in order to improve their hygiene level.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.192-197
• /
• 2011

Rice spent water (RSW) is generated when rice is rinsed before cooking. RSW has been discarded into sewerages due to its low usage in our daily life and become a major domestic wastewater for many years. But RSW can be used as a value-added resource because it contains various beneficial bioactive components. Therefore, fermented rice spent water (FRSW) has been already produced in our previous value-added fermentation process. In this study, proximate compositions and contents of other typical fermentation products were compared between RSW and FRSW. Both RSW and FRSW contain approximately 99.3% moisture and 0.7% total solids. Compared to those of RSW on a dry basis, carbohydrate content of FRSW was decreased by 44.8% and crude protein, lipid, and ash contents of FRSW were increased by 16.4%, 18.8%, and 36.6%, respectively. In addition, starch granules of RSW were intact as those of rice flour were, but those of FRSW were not. RSW did not have lactic acid, but FRSW had 212.13 and 181.25 g/kg D- and L-lactic acid, respectively. Free amino and ammoniacal nitrogen contents of FRSW were 12 and 7 times higher than those of RSW, respectively. Lactic acid, free amino, and ammonical nitrogen contents were considered to be increased in FRSW because carbohydrates could be disintegrated into lactic acids and proteins into free amino or ammoniacal nitrogens during the fermentation process.

• The Journal of Korean Society for School & Community Health Education
• /
• v.17 no.1
• /
• pp.89-99
• /
• 2016

Objectives: This cross-sectional study aims to investigate the prevalence and factors relating to handwashing with soap among Korean adults. Methods: Study subjects consist of 755 adults who have been contacted in September 2013 via telephone surveys. The data collected has been analyzed using descriptive statistics, a chi-square test and a logistic regression analysis. A primary purpose is to understand the prevalence of handwashing with soap more than 8 times daily and for 30 seconds per wash among adults. Independent variables include socioeconomic levels, the participants' perception and knowledge of handwashing and their educational experiences relating to handwashing. Results: The overall percentile of people who wash their hands with soap 8 time per day for 30 seconds or more per wash was 16.0%, which is 121 people out of 755 study subjects. In univariate analysis, age, education levels, monthly average income, handwashing habits, perceptions relate to the importance of handwashing, self-assessment of handwashing, environment of public toilet, and the completion of handwashing education shows significant result. Significant differences also appear (p<0.05) in logistic regression analysis on binary variables. There is a strong correlation between daily frequency of handwashing and willingness to wash hands while outside. For example, people who wash their hands very often while outside are 2.24 times (95% C.I. 1.29-3.87) more likely to practice handwashing with soap 8 times per day for 30 seconds or more per wash than those people who only intermittently wash their hands while outside. Furthermore, people with general unwillingness to wash their hands while outside are 4.61 times (95% C.I. 1.22-3.28) less likely to practice handwashing with soap 8 times per day for 30 seconds or more per wash than those with general willingness. Conclusions: This study has been carried out to identify the decision factors in practicing handwashing with soap for Korean adults. In univariate analysis, age, education level, monthly average income, handwashing habits, handwashing self-assessment, public toilet environment, completion of handwashing education and so forth have been identified to be the decision factors. This study result shows that the overall level of cleanliness of public toilet perceives to be poor and it suggests that the environment of public toilet needs to be enhanced. As the handwashing habits and handwashing-self assessment have been identified to be the significant decision factors for handwashing, there search and approach in these factors need to be developed further.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.544-552
• /
• 2011

The purpose of this study was to develop an analytical method for determining 15 polycyclic aromatic hydrocarbons (PAHs) of EU priority using gas chromatography (GC)-tandem mass spectrometry (MS). The PAHs in ground coffee were analyzed after being extracted using methods such as saponification-liquid-liquid extraction, Soxhlet extraction, and solid-liquid extraction. The solid-liquid extraction method showed the greatest repeatability and most efficient reduction of the matrix effect. GC-tandem MS for the quantification of the 15 PAHs showed better resolution and lower limit of detections (LODs) than GC-MS-selected ion monitoring (SIM) and high performance liquid chromatography with fluorescence detector. LODs of this method for the ground coffee types were 0.002-0.1 ${\mu}g/kg$ and limit of quantifications (LOQs) were 0.006-0.2 ${\mu}g/kg$ The recoveries ranged from 52.6 to 93.3%. Forty-six commercial types of ground coffee were analyzed to determine their PAHs contamination levels. PAHs concentration ranged from ND to 5.988 ${\mu}g/kg$. This study was conducted with toxicity equivalence factors, the U.S. EPA recommendation to identify dietary risks for PAHs in different types of coffee. The estimated average daily dose of PAHs was $5.24{\times}10^{-8}$ mg/kg body weight/day.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.99-110
• /
• 2018

In this study, oil of Platycodon grandiflorum seeds was prepared using supercritical carbon dioxide extraction (SCE) and its physicochemical indices as a new edible oil were investigated. Compared to Soxhlet solvent extraction, SCE under the condition of 6,000 psi at $40^{\circ}C$ produced more oil, especially from the roasted seeds to 32.7%. TLC analysis showed triacylglycerols accounted for most of the oil obtained from roasted Platycodon grandiflorum seeds by SCE similarly to commercial soybean oil or perilla seeds oil. The oil had highly unsaturated lipid with considerable amount of linoleic acid(73.27%) much more than two commercial oils followed by oleic acid(13.16%). Physicochemical properties of the oil were as follows; specific gravity, 0.92; dynamic viscosity, 45.37 cP; refractive index, 1.48; color, L=47.30, a=-3.69, b=25.72; iodine value, 141.57 g $I_2/100g$ oil; saponification value, 191.21 mg of KOH/g of oil; acid value, 2.60 mg of KOH/g of oil. Among those, refractive index, viscosity and iodine value, which were related to unsaturation degree of lipid, were ranged between those of two commercial oils. The oxidation stability of oil(2.03 hr) was also ranged between less stable perilla seeds oil(1.79 hr) and more stable soybean oil(2.94 hr) based on the induction time measured by Rancimat assay. In addition to extraction yield increase, seeds roasting provided further benefits such as reductions of cholesterol ester content and acid value without change in fatty acid composition. In conclusion, oil was extracted from the roasted Platycodon grandiflorum seeds at high yield by supercritical carbon dioxide and it seemed to have proper characteristics as a edible oil.

• Journal of the Korean Chemical Society
• /
• v.45 no.6
• /
• pp.555-561
• /
• 2001

Vinyl acetate usually used in PVA resin preparation was converted to PVAc by bulk polymerization using AIBN as a initiator and PVA was synthesized by changing the concentration of NaOH added for saponification subsequently. As a result of estimating molecular weight using GPC, molecular weight increased as the NaOH concentration increased to 2.5 N, 5.0 N, 7.5 N and 10.0 N and polydispersity had similar values of 2.1~2.3, however, showed slightly decreasing tendency. In addition, PVA saponificated by 10.0 N-NaOH showed high syndiotacticity in observation of tacticity using NMR spectroscopy. From this fact, the degree of tacticity was predicted to be high and it was in good agreement with the tendency of polydispersity by GPC. Also, from the result of FT-IR spectroscopy, it might be known that hydrolysis was more promoted in the PVA with 10.0 N-NaOH than other NaOH concentration. Intrinsic viscosity measured using Ubbelohde viscometer, which increased as the concentration of NaOH added for saponification increased. The change of shear strength with the change of shear rate was investigated using Brookfield viscometer, in consequence, viscosity of PVA synthesized decreased as shear rate increased. PVA solution confirmed to show the shear thining behavior by Casson plot and PVA with 10.0 N-NaOH had the largest yield value. DSC measurement was performed to know the thermal properties of PVA. Tp had nearly constant value of 214$^{\circ}C$ in all cases except for adding 2.5 N-NaOH and $\Delta$H was increased as the concentration of NaOH increased. From this properties, it was concluded that the degree of hydrogen bonding was proportional to the added concentration of NaOH and the increase of the degree of hydrogen bonding and hydrophobic interaction could affect the rheological and thermal properties of title compound.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.45-51
• /
• 2006

In the field of makeup cosmetics, especially, powder-based foundations such as two-way cake, pact and face powder, the quality of which is known to be strongly influenced by the properties of powder, surface treatment technology is widely used as a method to improve the various characteristics of powder texture, wear properties, dispersion ability and so on. The two-way cake or pressed-powder foundation is one of the familiar makeup products in Asian market for deep covering and finishing purpose. In spite of the relent progress in surface modification method such as composition of powders with different characteristics and application of a diversity of coating ingredient (metal soap, amino acid, silicone and fluorine), this product possess a technical difficulty to enhance both of the adhesion power and spreadability on the skin in addition to potential claim of consumer about heavy or thick feeling. This article is covering the preparation and coating method of nano-vesicle that mimic the double-layered lipid lamellar structure existing between the corneocytes of the stratum corneum in the skin for the purpose of improving both of two important physical characteristic of two-way cake, spreadability and adhering force to skin, and obtining better affinity to skin. Nano-vesicle was prepared using the high-pressure emulsifying process of lecithin, pseudo ceramide, butylene glycol and tocopheryl acetate. This nano-sized emulsion was added to powder-dispersed aqueous phase together with bivalent metal salt solution and then the filtering and drying procedure was followed to yield the nano-vesicle coated powder. The amount of nano-vesicle coated on the powder was able to regulated by the concentration of metal salt and this novel powder showed the lower friction coefficient, more uniform condition of application and higher adhesive powder comparing with the alkyl silane treated powder from the test result of spreadability and wear properties using friction meter and air jet method. Two-wav cake containing newly developed coated powder with nano-vesicle showed the similar advantages in the frictional and adhesive characteristics.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.94-101
• /
• 1989

Transport properties of 2DEG at AlGaAs/GaAs interface such as average electron energy, flight distance, each valley occupancy ratio, average electron velocity for various fields are investigated by MONTE-CARLO method. As the electric field increases, more electrons transit drastically from (000) valley to (000) upper valley. This phenomenon shows the nonstationary effect such as velocity overshoot. The duration of the transient decreases from about 1.4 psec for electric field E = 7KV/cm to about 0.7 psec for 12KV/cm. The average electron velocity during transient transport in 2DEG is about 8 times the steady-state velocity for E = 12KV/cm at room temperature. In comparison with bulk GaAs the peak velocity in the 2DEG is higher than that in even pure bulk GaAs at electric field E = 7 KV/cm. On the basis of the fact that the electrons in the 2DEG have larger peak velocity and shorter transient time of velocity than those in the bulk GaAs, it is suggested that the device with 2DEG may obtain higher mobility than that with bulk GaAs.