• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.775-784
• /
• 2023

In terms of flood management, it is necessary to analyze quantitative rainfall and runoff from a spatial and temporal perspective and to analyze runoff for heavy rainfall events that are concentrated within a short period of time. The simulation and analysis results of rainfall-runoff models vary depending on the type and input data. In particular, rainfall data is an important factor, so calculating areal mean rainfall is very important. In this study, the areal mean rainfall of the Samcheok Osipcheon(Riv.) watersheds located in the mountainous terrain was calculated using the Arithmetic Mean Method, Thiessen's Weighting Method, and the Isohyetal Method, and the rainfall-runoff results were compared by applying the distributional model S-RAT and the lumped model HEC-HMS. The results of the temporal transferability study showed that the combination of the distributional model and the Isohyetal Method had the best statistical performance with MAE of 64.62 m³/s, RMSE of 82.47 m³/s, and R² and NSE of 0.9383 and 0.8547, respectively. It is considered that this study was properly analyzed because the peak flood volume occurrence time of the observed and simulated flows is within 1 hour. Therefore, the results of this study can be used for frequency analysis in the future, which can be used to improve the accuracy of simulating peak flood volume and peak flood occurrence time in mountainous watersheds with steep slopes.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.255-260
• /
• 2023

As demanding the detection of explosive molecules, it is required to develop rapidly and precisely responsive sensors with ultra-high sensitivity. Since two-dimensional semiconductors have an atomically thin body nature where mobile carriers accumulate, the abrupt modulation carrier in the thin body channel can be expected. To investigate the effectiveness of WSe₂ semiconductor materials as a detection material for TNT (Trinitrotoluene) explosives, WSe₂ was synthesized using thermal chemical vapor deposition, and afterward, WSe₂ FETs (Field Effect Transistors) were fabricated using standard photo-lithograph processes. Raman Spectrum and FT-IR (Fourier-transform infrared) spectroscopy reveal that the adsorption of TNT molecules induces the structural transition of WSe₂ crystalline. The electrical properties before and after adsorption of TNT molecules on the WSe₂ surface were compared; as -50 V was applied as the back gate bias, 0.02 μA was recorded in the bare state, and the drain current increased to 0.41 μA with a dropping 0.6% (w/v) TNT while maintaining the p-type behavior. Afterward, the electrical characteristics were additionally evaluated by comparing the carrier mobility, hysteresis, and on/off ratio. Consequently, the present report provides the milestone for developing ultra-sensitive sensors with rapid response and high precision.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.77-84
• /
• 2024

Aging and damaged underground utilities cause cavity and ground subsidence under roads, which can cause economic losses and risk user safety. This study used infrared cameras to assess the thermal characteristics of such cavities and evaluate their reliability using a CNN algorithm. PVC pipes were embedded at various depths in a test site measuring 400 cm × 50 cm × 40 cm. Concrete blocks were used to simulate road surfaces, and measurements were taken from 4 PM to noon the following day. The initial temperatures measured by the infrared camera were 43.7℃, 43.8℃, and 41.9℃, reflecting atmospheric temperature changes during the measurement period. The RP algorithm generates images in four resolutions, i.e., 10,000 × 10,000, 2,000 × 2,000, 1,000 × 1,000, and 100 × 100 pixels. The accuracy of the CNN model using RP images as input was 99%, 97%, 98%, and 96%, respectively. These results represent a considerable improvement over the 73% accuracy obtained using time-series images, with an improvement greater than 20% when using the RP algorithm-based inputs.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.192-199
• /
• 2024

Wave overtopping is a significant natural hazard that occurs in coastal areas, primarily driven by high waves, particularly those generated during typhoons, which can cause coastal flooding. The development of residential and commercial areas along the coast, driven by increasing social and economic demands, has led to a concentration of people and assets in these vulnerable areas. This, coupled with long-term sea level rise and an increase in typhoon frequency, has heightened the risk of coastal hazards. Traditionally, the evaluation of wave overtopping volumes has relied on directly measuring the collected volume of water that exceeds the crest height of structures through hydraulic model experiments. These experiments are averaged over a specific measurement period. However, in this study, we propose a new method for estimating individual wave overtopping volumes. We utilize the temporal variation of wave overtopping heights to develop an observation system that can quantitatively assess wave overtopping volumes in actual coastal areas. To test our method, we conducted hydraulic model experiments on rubble mound breakwaters, which are commonly installed along the Korean coast. We introduce wave overtopping discharge coefficients, assuming that the inundation velocity from the structure's crest is the long-wave velocity. We then predict overtopping volumes based on wave overtopping heights and compare and review the results with experimental data. The findings of our study confirm the feasibility of estimating wave overtopping volumes by applying the overtopping discharge coefficients derived in this study to wave overtopping heights.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.75-84
• /
• 2023

Many developing countries face challenges in estimating long-term discharge due to the lack of hydrological data for water supply planning, making it difficult to establish a rational water supply plan for decision-making on water distribution. The study area, the Bandung region in Indonesia, is experiencing rapid urbanization and population concentration, leading to a severe shortage of freshwater. The absence of water reservoir prediction methods has resulted in a water supply rate of approximately 20%. In this study, we aimed to propose an approach for predicting water reservoirs in developing countries by analyzing water safety and potential water supply using the MODSIM (Modified SIMYLD) network model. To assess the suitability of the MODSIM model, we applied the unit hydrograph method to calculate long-term discharge based on 19 years of discharge data (2002-2020) from the Pataruman observation station. The analysis confirmed alignment with the existing monthly optimal operation curve. The analysis of power plant capacity revealed a difference of approximately 0.30% to 0.50%, and the water intake safety at the Pataruman point showed 1.64% for Q95% flow and 0.47% for Q355 flow higher. Operational efficiency, compared to the existing reservoir optimal operation curve, was measured at around 1%, confirming the potential of using the MODSIM network model for water supply evaluation and the need for water supply facilities.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.107-130
• /
• 2024

Urban land surface temperature (LST) change is a major environmental factor that affects the thermal comfort, energy consumption, and health of urban residents. Most studies that explored the relationship between LST and urban built-environment form analyzed only midday LST. This study explores the diurnal variation of summertime LST in Seoul using ECOSTRESS data, which observes LST at various times of the day and analyzes whether the LST variation differs by built environment type. Launched in 2018, ECOSTRESS operates in a non-sun-synchronous orbit, observing LST with a high resolution of 70 meters. This study collected data from early morning (6:25) to evening (17:26) from 2019 to 2022 to build time-series LST. Based on greenery, water bodies, and building form data, eight types of Seoul's built environment were derived by hierarchical clustering, and the LST fluctuation characteristics of each cluster were compared. The results showed that the spatial disparity in LST increased after dawn, peaked at noon, and decreased again, highlighting areas with rapid versus stable LST changes. Low-rise and high-rise compact districts experienced fast, high temperature increases and high variability, while low-density apartments experienced moderate LST increases and low variability. These results suggest urban forms that can mitigate rapid daytime heating.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.1-16
• /
• 2024

In the present highway design guidelines suggest that the capacity of one-lane hi-pass lanes is 2,000 veh/h for mainline toll plaza and 1,700 veh/h for interchange toll plaza. However, in a study conducted in early 2010, capacity of the mainline toll plaza was presented with 1,476 veh/h/ln to 1,665 veh/h/ln, and capacity of the interchange toll plaza was presented as 1,443 veh/h/ln. Accordingly, this study examined the feasibility of the capacity of the currently proposed highway one-lane hi-pass lane. Based on the 2021 individual vehicle passing data collected from the one-lane hi-pass gantry, the speed-traffic volume relationship graph and headway were used to calculate and compare capacity. In addition, the bootstrapping technique was introduced to utilize the headway and new processing methods for collected data were reviewed. As a result of the analysis, the one-lane hi-pass capacity could be estimated at 1,700 veh/h/ln for the interchange toll plaza, and at least 1,700 veh/h/ln for the mainline toll plaza. In addition, by using the bootstrap technique when using headway data, it was possible to present an estimated capacity similar to the observed capacity.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.530-538
• /
• 2023

This study conducted an investigation into the effects of fruit type and cultivation practices (organic and conventional) on soil characteristics and soil arthropod communities within apple, blueberry, grape, peach, and pear orchards. The collection of soil arthropod communities was achieved through the utilization of pitfall traps, with concurrent measurements taken for soil moisture content, electrical conductivity, and temperature. The findings of this study unveiled substantial impacts attributed to fruit type and cultivation practices on soil characteristics. Specifically, within organic apple orchards, discernibly higher levels of soil moisture content, electrical conductivity, and temperature were observed when compared to their conventional counterparts. The investigation into soil arthropod communities yielded a total of 1,527 individuals, classified in to five phyla and 15 orders. The range of abundance, species richness, and diversity indices varied across conventional and organic orchards. Cultivation practices were found not to exert a significant influence on soil arthropod community characteristics. However, Non-metric Multidimensional Scaling (NMDS) analysis indicated a significant differentiation in soil arthropod community structure based on cultivation practices. This study underscores the importance of considering vegetation structure and environmental characteristics that may influence soil arthropod communities comprehensively when assessing the impact of cultivation practices on soil arthropods. Furthermore, it emphasizes the need to account for both the characteristics and structure of soil arthropod communities in understanding the implications of cultivation practices on these organisms.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.3
• /
• pp.191-198
• /
• 2024

Puddling before rice transplanting, which has been practiced traditionally, is no longer considered an essential process due to the overall development of agriculture. Non-puddling, a technique that omits rotary plow in a flooded condition after leveling and transplants immediately. In this study, we conducted the first case study in South Korea on the differences between puddling and non-puddling, and uploaded some of the data to Github. The effects of shortening and dispersing practices during the busy farming season, suppressing soil plow pan formation, and preventing non-point pollution emissions were confirmed in the early stages before and after transplanting. However, some limitations such as weed occurrence when lots of rain or water management practices fail, so it is recommended to implement non-puddling in irrigated paddy fields.

• Journal of Korea Water Resources Association
• /
• v.57 no.9
• /
• pp.615-626
• /
• 2024

To accurately and efficiently monitor soil moisture (SM) across South Korea, this study developed a SM estimation model that integrates the cloud computing platform Google Earth Engine (GEE) and Automated Machine Learning (AutoML). Various spatial information was utilized based on Terra MODIS (Moderate Resolution Imaging Spectroradiometer) and the global precipitation observation satellite GPM (Global Precipitation Measurement) to test optimal input data combinations. The results indicated that GPM-based accumulated dry-days, 5-day antecedent average precipitation, NDVI (Normalized Difference Vegetation Index), the sum of LST (Land Surface Temperature) acquired during nighttime and daytime, soil properties (sand and clay content, bulk density), terrain data (elevation and slope), and seasonal classification had high feature importance. After setting the objective function (Determination of coefficient, R² ; Root Mean Square Error, RMSE; Mean Absolute Percent Error, MAPE) using AutoML for the combination of the aforementioned data, a comparative evaluation of machine learning techniques was conducted. The results revealed that tree-based models exhibited high performance, with Random Forest demonstrating the best performance (R² : 0.72, RMSE: 2.70 vol%, MAPE: 0.14).