• The Journal of Korean Association of Computer Education
• /
• v.14 no.5
• /
• pp.97-104
• /
• 2011

Collaborative filtering is a methodology to recommend websites by obtaining data and opinions from the other users with similar tastes. During the past few years, this method has been used in various fields such as books, food, and movies in e-commerce systems. This study addresses the computation of similarity between users to determine items to be recommended in collaborative filtering systems. Previous studies measured similarity between users by treating each user's ratings independently without considering the distribution of the user's ratings. In contrast, this study measures similarity by utilizing position and rank information of each rating in the range of the user's ratings. The result of the experiments on the real datasets demonstrated that the proposed method improves the mean absolute error significantly, compared to the previous methods, especially when the predetermined range of ratings is large.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.146-153
• /
• 2009

Recently, the common grounding systems are adapted in most large structures. Since the ground resistance is insufficient to evaluate the performance of grounding systems, it is needed to measure grounding impedance. Even though the methods of measuring grounding impedance of large grounding systems are presented in IEEE standard 81.2, but they have not been described in detail. In this paper, we present the accurate method of measuring grounding impedance based on the revised fall-of-potential method and measurement errors due to earth mutual resistance and ac mutual coupling depending on locating test electrodes at remote earth were examined for the 15[m]$\times$15[m] grounding grid. As a result, the measurement error due to earth mutual resistance is decreased when the distance to auxiliary electrodes increased. To get rid of measurement errors due to mutual coupling, the potential lead should be installed at a right angle to the current lead. When the angle between the potential and the current leads is an acute angle or an obtuse angle, the mutual couple voltage is positive or negative, respectively. Generally, the measurement errors due to mutual coupling with an obtuse angle route are lower than those with an acute angle route.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2016

Two representative residual static methods of traveltime decomposition and stack-power maximization are discussed in terms of application to land seismic data. For the model data with synthetic shot/receiver statics (time shift) applied and random noises added, continuities of reflection event are much improved by stack-power maximization method, resulting the derived time-shifts approximately equal to the synthetic statics. Optimal parameters (maximum allowable shift, correlation window, iteration number) for residual statics are effectively chosen with diagnostic displays of CSP (common shot point) stack and CRP (common receiver point) stack as well as CMP gather. In addition to removal of long-wavelength time shift by refraction statics, prior to residual statics, processing steps of f-k filter, predictive deconvolution and time variant spectral whitening are employed to attenuate noises and thereby to minimize the error during the correlation process. The reflectors including horizontal layer of reservoir are more clearly shown in the variable-density section through repicking the velocities after residual statics and inverse NMO correction.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2020

It is important to estimate the optimal construction cost at the early stage of the project. In this regard, conceptual cost estimate is an important factor for estimate optimal construction cost. However, domestic conceptual cost estimate are only used as cost per unit area according to the building type, and it's accuracy is not high. Hence, the purpose of this study is to calculate the approximate quantity and cost for reinforcing bars, concrete, and formwork by presenting a regression formula based on the total floor area of the common work items in the frame work. In order to verify the accuracy and validity of the regression formula presented in this study, a comparative analysis was performed by applying the regression formula and the traditional approximate quantity take-off method to real cases. As a result, the estimated error rate of the traditional method was -102~+55%, and exceeded the estimated conceptual cost estimate accuracy range of -50~+100% suggested by AACE(American Association of Cost Engineering). On the other hand, the error rate of the regression formula method presented in this study was -6.4~+11.62%. This can be used not only for conceptual cost estimate range of accuracy, but also for detailed estimates. However, it is necessary to analyze the factors that affect the unit price as well as quantity in order to calculate the appropriate cost.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.73-84
• /
• 2005

A three layered neural network model was developed using back propagation algorithm to estimate the UU undrained shear strength of Korean soft soil based on the database of actual undrained shear strengths and piezocone measurements compiled from 8 sites over the Korea. The developed model was validated by comparing model predictions with measured values about new piezocone data, which were not previously employed during development of model. Performance of the neural network model was also compared with conventional empirical methods. It was found that the number of neuron in hidden layer is different for the different combination of transfer functions of neural network models. However, all piezocone neural network models are successful in inferring a complex relationship between piezocone measurements and the undrained shear strength of Korean soft soils, which give relatively high coefficients of determination ranging from 0.69 to 0.72. Since neural network model has been generalized by self-learning from database of piezocone measurements and undrained shear strength over the various sites, the developed neural network models give more precise and generally reliable undrained shear strengths than empirical approaches which still need site specific calibration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.830-836
• /
• 2006

In this paper described an auto tuning neuro-fuzzy PID controller based neural network. The PID type controller has been widely used in industrial application due to its simply control structure, easy of design, and inexpensive cost. However, control performance of the PID type controller suffers greatly from high uncertainty and nonlinearity of the system, large disturbances and so on. In this paper will design to take advantage of neural network fuzzy theory and pid controller auto toning technique. The value of initial scaling factors of the proposed controller were determined on the basis of the conventional PID controller parameters tuning methods and then they were adjusted by using neural network control techniques. This controller simple structure and computational complexity are less, and also application is easy and performance is excellent in system that is strong and has nonlinearity to system dynamic behaviour change or disturbance. Finally, the proposed auto tuning neuro-fuzzy controller is applied to magnetic levitation. Simulation results demonstrated that the control performance of the proposed controller is better than that of the conventional controller.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2002

The objective of this study is to provide a Precise form of spatial normalization with affine transformation. The quantitative comparison of the brain architecture across different subjects requires a common coordinate system. For the common coordinate system, not only global brain but also a local region of interest should be spatially normalized. Registration using mutual information generally matches the whose brain well. However. a region of interest may not be normalized compared to the feature-based methods with the landmarks. The hybrid method of this Paper utilizes feature information of the local region as well as intensity similarity. Central gray nuclei of a brain including copus callosum, which is used for feature in Schizophrenia detection, is appropriately normalized by the hybrid method. In the results section. our method is compared with mutual information only method and Talairach mapping with schizophrenia Patients. and is shown how it accurately normalizes feature .

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.441-441
• /
• 2015

북한의 수자원 현황을 분석하고 미래를 전망하는 일은 수자원 분야 전문가들의 공통된 관심사 중 하나이다. 그러나 많은 노력에도 불구하고 제한된 자료로 인해 이에 대한 체계적인 성과가 구축되지 못한 것이 사실이다(안재현 등, 2010). 북한 수자원 현황과 관련해서 1994년 한국수자원공사의"북한 수자원 현황 및 개발 동향"에 대한 연구와 1996년 한국과학기술단체총연합회의"남북한 수자원 비교평가 연구"가 수행된 바 있다. 본 연구에서는 2012년 7월 북한의 홍수피해에 대하여 북한지역의 빈약한 강우량 정보를 활용하여 위성으로부터 유도된 강우자료를 보정하여 북한지역의 홍수량을 산정하는데 활용할 수 있는 시계열 자료를 생성하는 것을 목적으로 하였다. 2012년 북한 홍수피해는 조선 중앙통신 보도에 의하면 6월 말부터 7월말까지 169명 사망, 400여명 실중, 144명 상해의 인명피해와 평안남북도, 자강도, 함경남북도 등 4만 3770여 가구가 침수되었으며, 농경지 피해는 6만 5280정보가 유실, 매몰, 침수(평안북도 2만 3400정보, 평안남도 2만 1900정보, 함경남도 5679정보, 함경북도 7220정보)의 피해를 입은 것으로 보도하고 있다(http://www.hani.co.kr/arti/politics/defense/545795.html). 한편, 북한의 기상수문국 통보에 의하면 2012년 장마가 시작된 이후 20일 동인 평균 강우량의 2배 가까운 비가 내렸으며, 특히 7월 19일 오후 9시부터 21일 오후 3시 사이 자강도 동신군에 413mm, 송원군에 383mm, 희천시에 322mm, 평안북도 태천군에 380mm, 향산군에 312mm, 동창군에 304mm의 폭우가 쏟아졌다고 조선중앙통신은 덧붙였다. 본 연구에서는 위성으로부터 유도된 강수자료 중 GSMaP_NRT자료를 활용하여 북한의 기상수문국에서 통보한 같이 기간의 강수량 자료를 분석한 결과 자강도 동신군 지역의 경우 총강우는 208.8mm로 분석되었으며, 평균강우는 9.49mm, 최대강우강도는 17.7mm/hr로 분석되었다. 두 자료의 총강우량에 대한 상대오차는 약 49.5% 정도의 오차가 있는 것으로 분석되었다. 위성강우 보정 방법으로 Immerzeel(2001) 등은 위성으로 관측된 시계열 자료와 지상계측된 시계열 자료를 분석하여 두 자료간의 평균과 표준편차를 이용하여 평균 및 표준편차 계수를 산정하여 위성자료에 대한 보정강우를 생성하는 방법을 제시한 바 있다. 본 연구에서는 위성으로부터 유도된 강우량 자료는 시계열 자료이나 지점계측 강우는 총강우만 존재하여 총강우에 대한 시계열 자료를 위성강수자료를 무차원화하여 지점계측의 위성 보정강우를 생성하였다.

• Journal of the Korean earth science society
• /
• v.40 no.5
• /
• pp.518-537
• /
• 2019

This study examined the implications of a place-based earth science program integrated with Mathematics. 11 pre-service earth science teachers and 22 middle school students participated in the service education activities of earth science for 30 hours focusing on the measurement of the earth's size through earth science experiments as part of the middle school curriculum. In order to minimize errors that may occur during the earth's size measurement experiments using Eratosthenes's shadows length method of the ancient Greek era, the actual data were collected after triangulation ratios were conducted in the locations of two middle schools: one in remote metropolitan and the other in rural area. The two schools' students shared the final estimate result. Through this process, they learned the mathematical method to express the actual data effectively. Participants, experienced the importance and difficulty of the repetitive and accurate data acquisition process, and also discussed the causes of errors included in the final results. It implies that a Place-Based Earth Science Program activity can contribute to students' increased-understanding of the characteristics of earth science inquiry and to developing their problem solving skills, thinking ability, and communication skills as well, which are commonly emphasized in science and mathematics in the 2015 reunion curriculum. It is expected that a place-based science program can provide a foundation for developing an integrated curriculum of mathematics and science.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.54-76
• /
• 1988

In Part Ⅰ of the paper, we have developed various block least mean-square (BLMS) adaptive digital filters (ADF's) based on a unified matrix treatment. In Part Ⅱ we analyze the convergence behaviors of the self-orthogonalizing frequency-domain BLMS (FBLMS) ADF and the unconstrained FBLMS (UFBLMS) ADF both for the overlap-save and overlap-add sectioning methods. We first show that, unlike the FBLMS ADF with a constant convergence factor, the convergence behavior of the self-orthogonalizing FBLMS ADF is governed by the same autocorrelation matrix as that of the UFBLMS ADF. We then show that the optimum solution of the UFBLMS ADF is the same as that of the constrained FBLMS ADF when the filter length is sufficiently long. The mean of the weight vector of the UFBLMS ADF is also shown to converge to the optimum Wiener weight vector under a proper condition. However, the steady-state mean-squared error(MSE) of the UFBLMS ADF turns out to be slightly worse than that of the constrained algorithm if the same convergence constant is used in both cases. On the other hand, when the filter length is not sufficiently long, while the constrained FBLMS ADF yields poor performance, the performance of the UFBLMS ADF can be improved to some extent by utilizing its extended filter-length capability. As for the self-orthogonalizing FBLMS ADF, we study how we can approximate the autocorrelation matrix by a diagonal matrix in the frequency domain. We also analyze the steady-state MSE's of the self-orthogonalizing FBLMS ADF's with and without the constant. Finally, we present various simulation results to verify our analytical results.