• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2013

In this paper the developed prediction technique of wave-making resistance performance for a ship attached with a vertical blade had been verified. Numerical analysis program as a prediction technique had been developed using the Rankine source panel method and the vortex lattice method(VLM). The nonlinearity of the free surface conditions was fully taken into account using the iterative method and the trim and the sinkage of the ship were also considered in the numerical analysis program. Panel cutting method was applied to get hull surface panels. Numerical computations were carried out for a 4000TEU container carrier and the vertical blade was attached 6 different locations astern. To investigate the validity of the numerical analysis program the commercial viscous flow field analysis program FLUENT was used to obtain the viscous flow field around the ship and the model test was performed. The model test results were compared with the numerical analysis results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.4
• /
• pp.405-420
• /
• 2008

Resistivity survey is one of the widely used methods for the investigation of stability of the ground or bedrock around tunnel and is also used as an essential base data for stability and reduction of construction cost through first-hand approximation of rock quality at design step. Generally, the analysis of resistivity survey data is performed by single measurement. When distribution variation of groundwater around a tunnel over time is necessary for maintenance of a tunnel, resistivity monitoring is very useful survey method to grasp distribution variation of groundwater. So we performed the grid line resistivity survey to monitoring resistivity variation for six times. And we also tried to evaluate application possibility of the resistivity monitoring for construction safety through providing detailed information on fault zones.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.79-88
• /
• 2015

This study numerically examined the mixing characteristics of rectangular cavity flows by using the hybrid lattice Boltzmann method (HLBM) applied to the finite difference method (FDM). Multi-relaxation time was used along with a passive scalar method which assumes that two substances have the same mass and that there is no interaction. First, we studied numerical results such as the stream function, position of vortices, and velocity profile for a square cavity and rectangular cavity with an aspect ratio of 2. The data were compared with previous numerical results that have been proven to be reliable. We also studied the mixing characteristics of a rectangular cavity flow such as the concentration profile and average Sherwood number at various Pe numbers and aspect ratios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.211-219
• /
• 2008

A three-dimensional inviscid flow solver has been developed based on unstructured meshes for the investigation of the effect of the external stores on the tail surfaces of a generic fighter aircraft. The numerical method is based on a vertex-centered finite-volume discretization and an implicit point Gauss-Seidel time integration. The calculations were made for a steady flow and the computed results were compared with experimental data to validate the flow solver. An unsteady time-accurate computation of the generic fighter aircraft with external stores at transonic flight conditions showed that the external stores cause unsteady loading on the horizontal tail surface due to the mutual interference between their wake and the horizontal tail surface. It was shown that downward deflection of the trailing edge flap significantly reduces the undesirable interference effect.

• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.26-34
• /
• 1997

An implicit viscous turbulent flow solver is developed for two-dimensional geon unstructured triangular meshes. The flux terms are discretized based on a cell-centered formulation with the Roe's flux-difference splitting. The solution is advanced in time us backward-Euler time-stepping scheme. At each time step, the linear system of equation approximately solved wi th the Gauss-Seidel relaxation scheme. The effect of turbulence is with a standard k-ε two-equation model which is solved separately from the mean flow equation the same backward-Euler time integration scheme. The triangular meshes are generated advancing-front/layer technique. Validations are made for flows over the NACA 0012 airfoil. Douglas 3-element airfoil. Good agreements are obtained between the numerical result experiment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.189-190
• /
• 2007

본 논문에서는 칼코게나이드 박막의 Ag 포토 도핑시 기판의 변화에 따른 Ag 이온의 도핑 특성을 예측하고자 하였다. 도핑 특성은 Ag 이온의 도핑으로 인한 굴절률 변화를 이용하여 진폭혈 회절격자 효율을 측정하여 확인하였다. 시료는 5N의 순도를 갖는 Ge, Se, Ag 물질을 준비하였고, 이중 GeSe를 조성의 비에 맞추어서 석영관에 진공 봉입후 용융 혼합하고 급냉하여 비정질 빌크를 제작한다. 만들어진 비정질 벌크와 Ag를 열 증착법을 이용하여 기판에 올리는 방법으로 샘플을 제작한다. 제작된 샘플에 레이저와 몇몇 광학 소자로 구성된 흩로-리소그라피 장치를 이용하여 격자구조로 442nm 의 빛을 조사 시킨다. 결론으로는 기판은 칼코게나이드 박막에의 Ag 도핑에 영향을 미친다는 것을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.1 no.3
• /
• pp.389-394
• /
• 1992

용액분무법으로 (100) MgO 단결정 기판위에 YBa2Cu3O7-x 초전도박막을 제조하 였다. YBa2Cu3O7-x 초전도 박막의 Y, Ba, Cu 원자의 상대적인 비는 EDX의 검출 한계내에 서 1 : 2 : 3이었고, 이는 분무 용액속의 금속이온의 비와 같았다. YBa2Cu3O7-x 초전도 박 막의 결정구조는 단일 상의 사방구조였으며, 기판에 수직인 c축의 방향으로 grain이 성장되 었고, 격자상수 c0는 11.678$\AA$였다. 95$0^{\circ}C$의 공기중에서 10분간 열처리한 박막의 Tc-on=100K, Tc-zero=80K, Jc=2.5 $\times$ 104A/cm2였고, 95$0^{\circ}C$의 흐르는 산소분위기에서 10분간 열처리한 박막의 Tc-on=103K, Tc-zero=80K, Jc=1.0 $\times$ 105A/cm2였다. 초전도 박막의 미세구 조, grain 크기와 grain 경계폭은 제조후 열처리(post-annealing) 시간과 가스 분위기에 강 한 영향을 받았다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.97-100
• /
• 1998

옵션의 가격을 계산하기 위한 수치해법은 크게 격자모형, 유한차분법, 그리고 몬테카를로 시뮬레이션의 세 가지로 분류된다. 유한차분법은 옵션가격함수가 만족하는 편미분 방정식의 모든 편도함수를 유한 차분식으로 근사하여 옵션을 평가하는 방법이다. 본 연구에서는 유한차분법을 이용하여 옵션을 평가 할 때 발생하는 가격계산 오차의 가장 큰 원인이 옵션 만기 손익구조(payoff)의 비선형성에 있음을 보인다. 특히, 옵션 시장에서 가장 거래가 많이 이루어지는 손익분기옵션(at the money option) 그리고 손익분기점에 가까운 옵션(around the money option)에서 가장 큰 오차가 발생함을 보인다. 또한 본 연구에서는 이러한 오차를 효율적으로 줄이기 위하여 행사가격 근처의 일부 구간에서만 구간점 사이의 간격을 변화시키는 수정된 유한차분법을 제시하고 오차의 크기와 계산의 효율성 측면에서 기존의 유한차분법과 비교·분석한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1022-1025
• /
• 2003

본 연구에서는 저온 동시 합성법을 이용하여 ITO 나노 분말을 제조하였다. 저온 동시 합성법은 기존의 염화 인듐 및 염화 주석 염이 아닌 인듐 및 주석 유기물 염들을 사용하므로 기존의 $600{\sim}700^{\circ}C$가 아닌 $300^{\circ}C$ 이하에서 공정이 가능하고, 이로써 초미세급의 나노 분말을 얻을 수 있다. 또한 두가지 유기물 염을 동시에 산화시킴으로써 한번에 동시 합성이 가능하다. 이러한 저온 동시 합성법으로 제조한 나노 분말을 분석한 결과 분말의 크기는 평균 5 nm, 비 표면적은 약 $104m^2/g$ 이었다. 또한 EDS 및 XRD 분석 결과 분말의 결정상은 $In_2O_3$ 격자 내에 $3{\sim}8%$의 Sn이 고용된 [222], [400], [440]의 입방정 구조인 고품질의 ITO 나노 분말을 제조할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.63-73
• /
• 1991

The data type of the echo sounding for the contouring of coastal chart is continuous profiles, and there are no data between the profiles. In this study, at first, the depths of the regular grid along the sounding line were interpolated by linear equation. After that the depths of the regular grid located between the profiles were interpolated by kriging. The semivariogram contributes to the weight of interpolation. After comparison with the conventional Moving Average and Kriging, it turns out that this algorithm shows merits in the field of the accuracy and computing time.