• Title/Summary/Keyword: 비강성

Search Result 286, Processing Time 0.025 seconds

Development of Composite Rollers for Polymer Film Processing (고분자 필름 제조 공정용 복합재료 롤러의 개발)

  • 방경근;이대길
    • Composites Research
    • /
    • v.14 no.1
    • /
    • pp.15-21
    • /
    • 2001
  • The pressing roller was designed and manufactured with high modulus carbon fiber composite material to exploit the high specific stiffness of the composite material. the optimal stacking sequence for the pressing roller was obtained from the FE analysis and the shape of the rubber coating layer was determined based on the calculated deflection for the uniform pressure on the film along the axial length of the pressing roller. Then the static deflection of the manufactured composite pressing roller was experimentally evaluated in comparison with analysis result and dynamic characteristics were measured through vibrational test.

  • PDF

Effect of matrix on fatigue strength of carbon fiber composite materials (탄소섬유강화 복합재료의 피로강도에 미치는 모재의 영향)

  • 유승원
    • Journal of Ocean Engineering and Technology
    • /
    • v.6 no.1
    • /
    • pp.113-121
    • /
    • 1992
  • In this study, the variation of fatigue strength in CF/PEEK and CF/EPOXY, the matrix and interfacial strength of which differ from each other, has been studied from the viewpoint of microfracture behavior. The results obtained are as follows; According as the fatigue strength moves from the lower cycle range to the higher cycle range, that of CF/PEEK shows higher curve than that of CF/EPOXY does. In the early stage of fatigue life, the characteristic of fatigue crack in CF/PEEK is mainly the fracture of longitudinal fiber, while that in CF/EPOXY is the fracture of transverse fiber. The difference of fatigue strength in these materials can be explained by the fracture criteria of transverse fiber and longitudinal fiber.

  • PDF

수종 점막증 메치오닌엔케팔린 및 유사체의 분해 특성

  • 전인구;이치호;신영희
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1992.05a
    • /
    • pp.61-61
    • /
    • 1992
  • 여러 점막 추출액증 Met-Enk의 효소적 분해는 매우 신속하였고 1차식에 따랐으며 점막측 추출액에서의 분해속도는 직장>눈>질>비강점막의 순이었다. 비강, 직장, 질점막의 점막측 및 장막측 추출액 간의 분해속도에는 유의성 있는 차이는 없었으나 눈점막의 경우 내피측 추출액에서의 분해속도 (1.03 $\times$ $10^{-3}$ $min^{-1}$)가 표피측 추출액에서보다 현저히 낮았다. 모든 추출액에서 검출된 주요 분해산물은 Tyr 및 Des-Tyr-Met-Enk로 천연 Met-Enk의 점막 추출액중 분해는 주로 aminopeptidase류가 관여되고 있음을 알았으며 Tyr-Gly, Tyr-Gly-Gly등의 분해산물이 소량 출현함으로 보아 endopeptidase류도 분해에 다소 관여하고 있음을 알았다. YAGFM은 Met-Enk보다 분해가 현저히 지연되었으며 그 분해속도도 직장>질>비점막의 순이었다. 이러한 분해는 분해산물로 Tyr이 검출되지 않은점으로 보아 YAGFM의 점막 추출액중 분해는 주로 endopeptidase류가 주로 관여되는 것으로 추정된다.

  • PDF

A Study on the Dynamic Characteristics of the Composite Boring Bar (복합재료 보링바의 동적 특성에 관한 연구)

  • 황희윤;김진국;이대길
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2003.04a
    • /
    • pp.206-210
    • /
    • 2003
  • Machining of deep holes with conventional boring bars frequently induce chatter vibration because of their low dynamic stiffness which is defined as the product of static stiffness and damping of conventional boring bar materials. In addition, the specific stiffness ($E/{\rho}g$) of boring bars is more important than the static stiffness to increase the fundamental natural frequency of boring bars in high speed machining. Therefore, boring bar materials should have high static stiffness and high damping as well as high specific stiffness. The best way to meet requirements is to employ fiber reinforced composite materials for high speed boring bars because composite materials have high static stiffness, high damping and high specific stiffness compared to conventional boring bar materials. In this study, the dynamic characteristics of carbon fiber epoxy composite boring bars were investigated. From the metal cutting test, it was found that the chatter was not initiated up to the ratio of length to diameter of 10.7 at the rotating speed of 2,500 rpm.

  • PDF

어려운 기도 관리: 후두 상부의 기도 폐쇄

  • 성명훈
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 2003.09a
    • /
    • pp.112-112
    • /
    • 2003
  • 호흡곤란에 대한 적절한 대처는 의사로서 숙지하여야 할 가장 중요하고도 기본적인 개념 중의 하나이다. 상부 기도에 발생하는 여러 가지 임상적 상황은 흔히 흡기성 천명을 동반하는 호흡 곤란으로 나타나고, 이에 대해 흔히 기도 삽관이나, 기관절개술 등이 행해 지지만, 그 발생 원인에 대해서 감별점들을 숙지하지 않으면, 원발 질환에 대한 합리적인 치료 뿐만 아니라 응급상황에서 적절하게 기도를 확보하는 데에도 문제가 생길 수 있다. 후두 상부에 일어나는 기도폐쇄의 상황은 비강에서부터 인두와 성문 상부, 식도 입구부에 이르는 해부학적 위치에 발생하는 다양한 질환들에 의한다. 비강과 비인두에는 pyriform aperture stenosis, choanal atresia, lacrymal duct cyst, 또는 teratoma나 encephalocele과 같은 질환이 발생할 수 있다. 구강, 인두부에서는 다양한 종류의 안면골격의 이상이나 설거대증, 또는 설갑상선, 갑상설관낭종, 또는 유피종등이 설기저부에 발생하기도 하고, 흔한 이유로 심한 편도-아데노이드 비대가 심각한 호흡곤란을 일으키기도 한다. 특히 소아에서는 이물의 가능성도 항상 염두에 두어야한다 이와 같이 기도 협착의 위치에 따라서 임상적 표현 양상이 구별될 수 있고, 또 부위에 따라 다양한 질환이 감별되어야 하므로 발생 위치에 따른 각 질환의 이해가 적절한 기도의 관리를 위해서 필수적이다.

  • PDF

An Analytical Study on the Buckling of Orthotropic Plates and Local Buckling of Compression Members (직교이방성 판의 좌굴 및 압축재의 국부좌굴에 대한 해석적 연구)

  • Choi, Jin-Woo;Lee, Kang-Yeon;Park, Jung-Hwan;Yoon, Soon-Jong
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.3 no.1
    • /
    • pp.21-28
    • /
    • 2012
  • In this paper, we present the analytical study results pertaining to the buckling of the orthotropic plates and local buckling of structural compression members composed of orthotropic plate components. Fiber reinforced polymeric plastic (FRP) materials, have many advantages over conventional structural materials such as steel and concrete. The advantages of the FRP materials are high specific strength and stiffness, high corrosion resistance, right weight, etc. Among the various manufacturing methods, pultrusion process is one of the best choices for the mass production of structural plastic members. Since the major reinforcing fibers are placed along the axial direction of the member, this material is usually considered as an orthotropic (tranversely isotropic, more specifically) material. However, pultruded fiber reinforced plastic structural members have low modulus of elasticity and are composed of orthotropic thin plate components the members are prone to buckle. Therefore, stability is an important issue in the design of the pultruded FRP structural members. In this paper, the buckling of orthotropic plates and the local buckling of pultruded FRP structural members are investigated by following the previous research results and the local buckling strength of the member produced in the domestic manufacturer is found.

타이타늄 합금의 군사적 응용(4)

  • Heo, Seon-Mu;Sim, In-Ok;Cheon, Chang-Hwan
    • Defense and Technology
    • /
    • no.7 s.245
    • /
    • pp.48-61
    • /
    • 1999
  • 높은 비강도, 높은 사용 온도, 내식성, 내산화성, 비자성, 생산성 등이 동시에 구비된 타이타늄 합금은 지상, 해상 및 수중, 우주 항공 장비 등의 군사적으로 중요한 요구 사항을 만족시킬 수 있는 재료로 향후 무기체계 고기능화 및 고성능화에 부응할 수 있는 전략적으로 가장 중요한 재료에 속한다

  • PDF

노출평가를 위한 BEI 근거 - SODIUM HYDROXIDE(1)

  • Kim, Chi-Nyeon
    • 월간산업보건
    • /
    • s.353
    • /
    • pp.29-33
    • /
    • 2017
  • 수산화나트륨(Sodium hydroxide)의 직업적 노출에 대한 TLV-Ceiling은 $2mg/m^3$으로 권고하였다. 권고수준은 수산화나트륨 에어로졸이 눈, 점막, 피부에 심한 자극을 유발하고 수산화나트륨 분진이 상기도 기관에 자극을 유발하는 농도에 근거하였다. 노출기준은 눈과 상기도 기관에 자극을 최소화하기 위하여 권고하였다. 고농도의 수산화나트륨에 장기간 노출되면 비강 궤양과 눈과 피부에 심한 손상을 유발할 수 있다. "피부", "감작제(SEN)", "발암성"의 경고주석을 권고하기에는 유용한 자료가 충분하지 않다.

  • PDF

Identification of English labial consonants by Korean EFL learners (한국 EFL 학습자들의 영어 순자음의 인지)

  • Cho, Mi-Hui
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2006.11a
    • /
    • pp.788-791
    • /
    • 2006
  • The perception of English labial consonants was investigated via experiment where 40 Korean EFL learners identified nonwords with the target labial consonants [p, b, f, v] in 4 different prosodic locations. The results showed that there was a strong positional effect since the accuracy rates of the four target consonants differed by position. Specifically, the average accuracy rate for the target consonants was higher in the stressed intervocalic position and initial onset position than in the unstressed intervocalic position and final coda position. Further, the accuracy rate for [f] is was high in all prosodic locations except the unstressed intervocalic position. This is unexpected in markedness theory given that fricatives are assumed to be more difficult to learn than stops.

  • PDF

A Case of Solitary Fibrous Tumor in Nasal Cavity (비강 내 발생한 고립성 섬유종 1예)

  • Lee, Myung Jun;Park, Byung Whoo;Cho, Jae Mahn;Kim, Yong Wan
    • Journal of Clinical Otolaryngology Head and Neck Surgery
    • /
    • v.29 no.2
    • /
    • pp.254-258
    • /
    • 2018
  • The solitary fibrous tumor (SFT) is a mesenchymal neoplasm that is described as spindle-shaped tumor cells on a collagenous background originating from pleural tissues. Recently, extrapleural SFT has been reported in nearly all sites, including the sublingual gland, parotid gland, nasal cavity and paranasal sinuses. Complete surgical excision is primary treatment for SFT, but diagnosing SFT is not often made until immunohistochemical evaluation after surgical resection. We report that the patient, 45-year-old male, was considered as a case of inflammation polyp arising from left nasal cavity with initial biopsy, however, it has turned out to be SFT after surgical treatment.