• Journal of Information Technology Services
• /
• v.12 no.2
• /
• pp.171-184
• /
• 2013

Frequently faced with dangerous situations, for evidentiary purpose in case of civil and criminal liability challenges, car drivers in Korea have been armed with so-called 'black boxes'; however, which are just video recorders in vehicles rather than real 'black boxes' that are equipped in the airplanes. In the United States, they are called EDRs(Event Data Recorders), more technically, which means that they record data of events happened while driving, such as velocity changes, airbags deployment, seatbelt wearing etc. just like in the airplanes. EDR technology is quickly becoming more advanced, more widely available, and less expensive; however, new concerns are emerging : the privacy of drivers. In U. S., vehicle manufacturers and insurance companies and the governmental agencies including the courts and legislatures are the main parties in terms of the EDR concerns. In order to determine the best way to regulate EDR, it is necessary to balance all the merits, such as safety, privacy, truth, justice and efficiency, to support a legal framework regulating the EDR concerns. This article, in light of the regulation of EDR and experience therof in the United States, examines EDR technology itself, particularly with respect to the automobile industry, describing its history, its current state, and trends that may change it in the future; and explains how the National Highway Transportation Safety Agency (NHTSA), legislatures, courts have approached EDR data. At the early stage of regulation on EDRs in Korea, examining U. S. legal framework and usages would help for successful establishment of legislation and regulation.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.9-16
• /
• 2017

An Algorithm for Lane Detection and Lane Departure Warning for a Vehicle Driving on Roads is proposed in This Paper. Using Images Obtained from On-board Cameras for Lane Detection has Some Difficulties, e.g. the Increase of Fault Detection Ratio Due to Symbols on Roads, Missing Yellow Lanes in the Tunnel due to a Similar Color Lighting, Missing Some Lanes in Rainy Days Due to Low Intensity of Illumination, and so on. The Proposed Algorithm has been developed Focusing on Solving These Problems. It also has an Additional Function to Determine How much the Vehicle is leaning to any Side between The Lanes and, If Necessary, to Give a Warning to a Driver. Experiments Using an Image Database Built by Collecting with Vehicle On-board Blackbox in Six Different Situations have been conducted for Validation of the Proposed Algorithm. The Experimental Results show a High Performance of the Proposed Algorithm with Overall 97% Detection Success Ratio.

• Journal of Hydrogen and New Energy
• /
• v.13 no.2
• /
• pp.101-109
• /
• 2002

This work was focused on the thermal decomposition of methane into hydrogen and carbon black without emitting carbon dioxide. Extensive experimental investigation on the thermal decomposition of methane has been carried out using a continuous flow reaction system with tubular reactor. The experiments were conducted at the atmospheric pressure condition in the wide range of temperature ($950-1150^{\circ}C$) and flow rate (250 - 1500 ml/min) in order to study their dependency on hydrogen yield. During the experiments the carbon black was successfully recovered as an useful product. Undesirable pyrocarbon was also formed as solid film, which was deposited on the inside surface of tubular reactor. The film of pyrocarbon in the reactor wall became thicker and thicker, finally blocking the reactor. The design of an efficient reactor which can effectively suppress the formation of pyrocarbon was thought to be one of the most important subjects in the thermal cracking of methane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.101-105
• /
• 2001

For high voltage XLPE power cables, semiconducting layers have been applied to prevent discharge at the interface between conductor and insulation, and/or insulation and external shielding layer. The semiconducting layers may be also effective to release electrical stress in the interface. The property of semiconducting layers are significantly related to the quality and reliability of power cables. Generally, these semiconducting layers are formed by extruding, the conductibility of the material is given by the carbon black mixed with base polymer. The life of power cables is depended on the smoothness of the interface between insulation and semiconducting layer. If the smoothness is no good, the life of power cables is shorter because the electrical stress and water tree is increased. The causes of no good smoothness are the void of the interface, the protrusions, the contaminants and impurities of the semiconducting layer. The selection and dispersion of the Carbon Black is the significant factor to determine the life of power cable in the manufacturing of semiconducting compound.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.241-250
• /
• 2006

Regarding a spam attack and the interception that a spinoff is largest among weakness of VoIP service at these papers study. Write scenario of a spam attack regarding VoIP service, and execute Call spam, Instant Messaging spam, Presence spam attack. A spam attack is succeeded in laboratories, and prove, and confirm damage fact of a user in proposals of a spam interception way of VoIP service, 1) INVITE Request Flood Attack 2) Black/White list, 3) Traceback, 4) Black Hole-Sink Hole, 5) Content Filtering, 6) Consent based Communication, 7) Call act pattern investigation, 8) Reputation System Propose, and prove. Test each interception plan proposed in VoIP networks, and confirm security level of a spam interception. Information protection of VoIP service is enlarged at WiBro, BcN, and to realize Ubiquitous Security through result of research of this paper contribute, and may make.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.374-378
• /
• 2007

Water-soluble terpolymer of acrylamide, diacetone acrylamide, and acrylic acid was prepared by redox initiators in aqueous medium. One component photoresist was synthesized by reaction of terpolymer with 4-azidoaniline. By blending the aqueous acrylamide/diacetone acrylamide copolymer solution with bisazide, 4,4'-diazidostilbene -2,2'-disulfuric acid sodium salt, two component photoresist was prepared. The photosensitivity per azido group unit mole of one component photoresist was 4 times higher than that of two component photoresist. The dot-type pattern was successfully achieved with one component photoresist at low exposure energy, which is prospective to be used as black matrix negative photoresist.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.326-333
• /
• 2003

Even though many studies have been reported about rubber vulcanization, it is still remained difficult to find a quantitative relationship between the final states of vulcanized rubber and initial formulation or processing conditions. Dynamic differential scanning calorimetry (DSC) method is known as a comparatively easy method to research for the rubber vulcanization in both experimental and analysis. In the present research, a study on the vulcanization reaction of NR/CB composites modified by isoprene(IR) and chloroprene(CR) rubbers is carried out using dynamic DSC method. Thermograms with several different heating rates were obtained and analyzed using the Kissinger method. Analysis showed that the vulcanization reaction was progressed through the first order reaction mechanism. In addition, the reaction temperature was severely influenced by the kinds or rubber modifiers, in this case, more influenced by CR than by IR. Those effects were clearly verified in the values of activation energy. Kinds of carbon blacks, however, could hardly influence on the reaction mechanism.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.27-35
• /
• 2010

Accurately extracting skin color regions is very important in various areas such as face recognition and tracking, facial expression recognition, adult image identification, health-care, and so forth. In this paper, we evaluate the performances of several skin color detection algorithms in indoor environments by changing the distance between the camera and the object as well as the background colors of the object. The distance is from 60cm to 120cm and the background colors are white, black, orange, pink, and yellow, respectively. The algorithms that we use for the performance evaluation are Peer algorithm, NNYUV, NNHSV, LutYUV, and Kimset algorithm. The experimental results show that NNHSV, NNYUV and LutYUV algorithm are stable, but the other algorithms are somewhat sensitive to the changes of backgrounds. As a result, we expect that the comparative experimental results of this paper will be used very effectively when developing a new skin color extraction algorithm which are very robust to dynamic real environments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.123-129
• /
• 2014

In accordance with the development of various convergence devices, cameras are being used in many types of the systems such as security system, driver assistance device and so on, and a lot of people are exposed to these system. Therefore the system should be able to recognize the human behavior and support some useful functions with the information that is obtained from detected human behavior. In this paper we use a machine learning approach based on 2D image and propose the human behavior pattern recognition methods. The proposed methods can provide valuable information to support some useful function to user based on the recognized human behavior. First proposed one is "phone call behavior" recognition. If a camera of the black box, which is focused on driver in a car, recognize phone call pose, it can give a warning to driver for safe driving. The second one is "looking ahead" recognition for driving safety where we propose the decision rule and method to decide whether the driver is looking ahead or not. This paper also shows usefulness of proposed recognition methods with some experiment results in real time.