• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.53-57
• /
• 2007

In this study, the flame retardancy and tensile properties of epoxy acrylate resin containing flame retardants based on phosphorous, bromine or metal hydroxide are investigated. It was found that the enhancement in flame retardancy of epoxy acrylate with decabromodiphenyl oxide (DECA) addition was better than the addition of 2,2,2-trichloroethyl dichlorophosphate (TCEDP). It seems that the high loading of TCEDP may delay the formation of crosslinking network and consequently decreases the conversion of epoxy acrylate. It was found that magnesium hydroxide ($Mg(OH)_2$) does not improve the flame retardancy of epoxy acrylate after added up to 40 wt%. The synergic effects were clearly observed for epoxy acrylate containing DECA/TCEDP combined flame retardants.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.69-73
• /
• 2010

Effects of reaction time and temperature on the isomerization and dehydrobromination reactions of brominated butyl rubber were investigated. The structural composition of brominated butyl rubber was determined by Fourier transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance spectroscopy($^1H$-NMR), Density functional theory (DFT) was used to study on the isomerization and dehydrobromination mechanisms of model compounds. The geometries for model compounds of 3-bromo-5,5,7,7-tetramethyl-2(2',2',4',4'-tetramethyl)pentyl-1-octylene (3BrOE), 1-bromo-5,5,7,7-tetramethyl-2(2',2',4',4'-tetramethyl)pentyl-2-octylene (1Br2OE) and 5,5,7,7-tetramethyl-2(2',2', 4',4'-tetramethyl)pentyl-1,3-octadiene (CD) had been optimized by using density functional theory at B3LYP/3-21G and B3LYP/6-31G levels. The predicted energy of 3BrOE lies higher than that of 1Br2OE which suggests that 1Br2OE configuration is more stable than the 3BrOE configuration. Compared with the energy barrier, the pathway of dehydrobromination is less competitive than that of isomerization. This is qualitatively consistent with the experimental results.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.300-316
• /
• 2002

The extraction methods of PBBs from environmental samples by soxhlet extraction for solid phase and liquid-liquid extraction for liquid phase were compared. After extraction, silicagel and florisil as column clean up methods were used for the comparison of cleanup efficiency with different solvent system. Also, the analytical instruments were used GC/MSD. The 22 kinds of PBBs standards were used to establish the analytical methods to perform the experiments of recoveries and detection limits in water and soil. The detection limits of PBBs represented 5~10 ng/L for water and 0.5~3.5 ng/g for soil samples, respectively. The recoveries of water samples represented 96~107% in n-hexane, dichloromethane and toluene for water, and 60~80% in combined solvent with n-hexane and acetone. The recoveries of soil sample were surveyed 67~97% in soxhlet extraction and 64~76% in ultrasonic extraction with selected solvents.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.155-162
• /
• 1984

Kinetic studies for the nucleophilic substitution reactions of para-substituted benzyl bromides and benzyl iodide with anilines were carried out in MeOH-MeCN mixtures at 35.0$^{\circ}$C. Hammett $ {\rho}_N,\;{\rho}_C$, Bronsted $ {\beta}$ and solvatochromic correlation coefficient a, s values were determined in order to clarify the transition state variations caused by changing nucleophiles, substituents, leaving group and solvents. The results of solvatochromic equation showed that ${\pi}^{ast}$effect was a dominant factor for the reaction systems studied. It was shown that the reaction proceeds via the dissociative $S_N$2 mechanism using the potential energy surface model approach. The potential energy surface model approach however failed to account for the transition state variation due to leaving group changes. The quatum mechanical approach showed that kinetic results were consistent with proposed dissociative $S_N$2 mechanism.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.153-160
• /
• 1965

Ultraviolet spectrophotometric investigations have been carried out on the systems of benzene with iodine, bromine, chlorine and iodine monobromide in carbon tetrachloride. The results reveal the formation of one to one molecular complexes of the type, $C_6H_6{\cdot}X_2\;or\;C_6H_6{\cdot}IX$ (X denotes halogen atoms). The equilibrium constants obtained at $25^{\circ}$for the complex formation are 0.173, 0.137, 0.0643 and 0.341 $lmole^{-1}$ for $C_6H_6{\cdot}I_2,\;C_6H_6{\cdot}Br_2,\;C_6H_6{\cdot}Cl_2\;and\;C_6H_6{\cdot}IBr$, respectively. These results combined with those obtained by other workers indicate that the relative stabilities of the benzene complexes decrease in the order, $ICl > IBr > I_2 > Br_2 > Cl_2.$ This order may be measure of their relative acidities toward benzene, which is explained in terms of the relative polarizabilities of halogen molecules and the relative electronegativities of halogen atoms.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.691-696
• /
• 2011

CTAB or CTAB-Nafion catalyst were successfully supported on siliceous hollow tubular MCM-41 which synthesized by hydrothermal method using CTAB as a single template or CTAB and Nafion-Na as mixed templates. The properties of two kinds of catalysts were characterized with XRD, SEM and adsorption and desorption isotherms of nitrogen and pore diameter distribution, respectively. Then they were applied to catalyze brominating reaction of 1,7-heptanediol, moreover the rate of brominating reaction with different catalysts was compared. The results showed that catalytic activities of CTAB/MCM-41 and CTAB-Nafion/MCM-41 are better than CTAB, and that of CTAB-Nafion/MCM-41 is the best because of its phase-transfer and strong acidity function. The two kinds of catalysts can be separated from the reactive products and recycled.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.335-341
• /
• 1984

Acetals of ${\alpha},{\beta}$-unsaturated aldehydes reacted readily with aryl bromides in the presence of palladium catalyst and triethylamine to form aryl conjugated enals. Acrolein diethyl acetal and methacrolein diethyl acetal were reacted with phenyl bromides with substituents such as methyl and isopropyl groups at $100^{\circ}C$. The reaction products yields except the reaction of o-bromotoluene with methacrolein diethyl acetal. The products were identified by proton nuclear magnetic resonance and infrared spectroscopy. In the reverse combination of reactants to prepare aliphatic 2,4-dienals in good yield of above 50%, 3-bromopropenal dimethyl acetal and (E)-3-bromo-2-methylpropenal diethyl acetal were used as vinylic halide reactants and 1-alkenes and ethyl acrylate as olefin reactants.

• YAKHAK HOEJI
• /
• v.55 no.5
• /
• pp.419-425
• /
• 2011

To secure the good quality of pharmaceutical products, dissolution specifications for Octylonium bromide tablets and Pinaverium bromide tablets are needed to be established, which are enrolled in KPC (Korea Pharmaceutical Codex) with having no appropriate specifications. For establishing dissolution specifications, a number of experiments based on the "Guideline of Dissolution Testing for Solide Oral Dosage Forms" were performed. The results of this study will be used for revising KPC and it is expected to contribute to the incessant production of quality ensured drugs.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.29-36
• /
• 2004

An analytical method of polybrominated diphenyl ethers in soil samples by isotope dilution method using gas chromatography/mass spectrometry (GC/MS)-selected ion monitoring (SIM) was described. PBDEs in soil were extracted with soxhlet extractor and then silica and florisil solid phase extraction (SPE) methods as purification of extract were compared. After clean-up, the extractions were analyzed by GC/MS with SIM mode. Quantitation was performed isotope dilution method using four $^{13}C$ isotopically labeled PBDEs as internal standards. This developed method was validated for eight congeners of PBDEs in the concentration range 0.04~4 ng/g in soil and the average recovery of the analytes ranged 30.8~110.8% for florisil and 44.4~110.7% for silica, respectively. The method detection limits of PBDEs were 0.04~0.3 ng/g.

• Nuclear Engineering and Technology
• /
• v.8 no.4
• /
• pp.195-201
• /
• 1976

The present levels for the contents of mercury, arsenic, bromine, copper, manganese and potassium in various groups of foodstuffs are evaluated and compared with data given previously by others. On the basis of the data for the levels, the average daily intakes have teen estimated to be 2.0$\times$10$^1$$\mu\textrm{g}$ for Hg, 3.2$\times$10$^2$$\mu\textrm{g}$ for As, 2.3$\times$10$^3$$\mu\textrm{g}$ for Br, 2.5$\times$10$^3$$\mu\textrm{g}$ for Cu, 6.8$\times$10$^3$$\mu\textrm{g}$ for Mn and 2.1$\times$10$^{6}$ $\mu\textrm{g}$ for K. For this purpose, the data reported as a result of the 1974 National Nutrition Survey have been used.