• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.2
• /
• pp.120-134
• /
• 2023

In this study, hydrodynamic characteristics of dam break flow were investigated by a series of experiments. The experiments were performed in a 2-D rectangular flume with obtaining instantaneous images of dam break flow to capture the free surface elevation, and pressure distributions on vertical wall and bottom of the flume. The initial water depth of the dam break flow was changed into 3 different heights, and the gate opening speed was changed during the experiments to study the effect of the gate speed in the dam break flow. Generation of dam break phenomena could be classified into three stages, i.e., very initial, relatively stable, and wall impact stages. The wall impact stage could be separated into 4 generation phases of wall impinge, run-up, overturning, and touchdown phases based on the deformation of the free surface. The free surface elevation were investigated with various initial water depth and compared with the analytic solutions by Ritter (1892). The pressures acting on the vertical wall and bottom were provided for the whole period of dam break flow varying the initial water depth and gate open speed. The measurement results of the dam break flow was compared with the hydrodynamic characteristics of green water phenomena, and it showed that the dam break flow could overestimate the green water loading based on the estimation suggested by Buchner (2002).

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.56-65
• /
• 2018

Pressure oscillation caused by the compressibility of entrapped air in dam break flow is analyzed using an open source code, which is a two-phase compressible code for non-isothermal immiscible fluids. Since compressible flows are computed based on a pressure-based method, the code can handle the equation of state of barotropic fluid, which is virtually incompressible. The computed time variation of pressure is compared with other experimental and computational results. The present result shows good agreements with other results until the air is entrapped. As the entrapped air bubbles pulsate, pressure oscillations are predicted and the pressure oscillations damp out quickly. Although the compressibility parameter of water has been varied for a wide range, it has no effects on the computed results, because the present equation of state for water is so close to that of incompressible fluid. Grid independency test for computed time variation of pressure shows that all results predict similar period of pressure oscillation and quick damping out of the oscillation, even though the amplitude of pressure oscillation is sensitive to the velocity field at the moment of the entrapping. It is observed that as pressure inside the entrapped air changes quickly, the pressure field in the neighboring water adjusts instantly, because the sound of speed is much higher in water. It is confirmed that the period of pressure oscillation is dominated by the added mass of neighboring water. It is found that the temperature oscillation of the entrapped air is critical to the quick damping out of the oscillations, due to the fact that the time averaged temperature inside the entrapped air is higher than that of surrounding water, which is almost constant.

• Journal of the Korean Institute of Gas
• /
• v.12 no.1
• /
• pp.36-41
• /
• 2008

Using the finite element analysis, this paper presents the strength safety of a side wall of an outer tank and a roof structures in a full containment LNG storage tank system. The outer tank structure in which is constructed with a prestressed concrete is forced by internal hydrostatic and hydrodynamic pressures of a leaked LNG and an external wind pressure including a typhoon one. The FEM computed results show that the ring beam between a side wall of an outer tank and a roof structure supports most of the internal and the external loads. This means that the design point of the outer tank system is a ring beam structure and the other one is a center part of the roof structure. In this FE analysis model of a full containment LNG tank system, the outer tank and the roof structures are safe for the given combined loads such as an internal leaked LNG pressure and an external typhoon pressure.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.119-125
• /
• 2021

Subsea pipelines are widely used to transport hydrocarbons from ultra-deep seawater to facilities on the coast. A sandwich pipe is a pipe-in-pipe system in which the annulus between the two concentric steel pipes is filled with polymer cores and fillers for insulation and structural reinforcement. Sandwich pipeline is always exposed to complex loading such as bending moment, bulking, internal and external pressures caused by installation, operation and environmental factors. This research provides insights into the structural integrity of sandwich pipeline exposed to complex loading conditions using a linear matching method (LMM). The finite element model of the sandwich pipeline has been generated from previous research, and the model validation is performed by comparing the results of the linear analysis between the two models. The temperature dependent material properties are used to simulate the behavior of real pipeline, and the elastic-perfectly plastic (EPP) model has been taken into account for the material non-linearity. Numerical results provide comprehensive insights into the structural response of the sandwich pipeline under monotonic and cyclic loading and provide notable points about the evaluation of the plastic collapse limit and the elastic shakedown limit of the sandwich pipeline.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.27-27
• /
• 2021

세굴은 유체와 유사의 상호작용으로 발생하는 중요한 자연 현상 중 하나로, 구조 및 지반 붕괴, 홍수, 생태계 파괴 등의 문제를 야기할 수 있다. 이러한 세굴 현상을 예측하기 위해 많은 수치적 연구가 진행되어왔지만, 대부분의 연구가 기존 격자기반방법인 유한체적법 (FVM)과 개별요소법 (DEM)이 연성된 모델을 이용하였고, 이는 격자 의존도로 인한 정확도와 효율성의 문제점을 보였다. 해결책으로 입자기반 유체해석 방법인 약압축성 SPH (WCSPH)와 개별요소법의 결합모델을 이용한 모의가 연구되어 왔지만, 단순 밀도차를 활용한 유체해석방법이 압력의 불안정성을 야기하여 유사의 운동에도 영향을 주는 결과를 보였다. 또한, 개별요소법의 특성상 모의 입자의 크기를 실제 실험 입자의 크기와 동일하게 설정하면서 입자수가 지나치게 증가해 계산의 효율성이 현저히 낮아지게 되었고, 이로 인해 실제 자연 지형에 적용하는데 어려움을 보여주었다. 본 연구에서는 향상된 세굴 수치모의해석을 위해 반복법을 통해 안정적인 유체 압력을 계산하는 비압축성 SPH (ISPH)와 개별요소법을 연성한 ISPH-DEM 모델을 사용하였다. 또한, 계산속도 향상을 위해 하나의 입자가 다수의 작은 입자의 움직임을 대표하는 Coarse-grained 방법을 적용하여 기존 모델을 개선하였다. 개선된 모델을 NFLOW ISPH PURPLE 소프트웨어를 이용하여 세굴 현상을 수치 모의하였고 실험 결과와 검증을 진행한 결과, 세굴의 깊이, 너비, 형상 등을 비교하였을 때 약 10% 이내의 오차를 보였고, Coarse-grained 방법을 통한 입자 수 감소로 최소 13배 증가된 해석 속도를 보였다. 이를 통해 본 연구에서 제시된 모델이 실제 자연 지형에서의 적용가능성을 확인할 수 있었다.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.71-80
• /
• 2010

The violent free-surface motions and the corresponding impact loads are numerically simulated by using the Moving Particle Semi-implicit (MPS) method, which was originally proposed by Koshizuka and Oka (1996) for incompressible flows. In the original MPS method, there were several shortcoming including non-optimal source term, gradient and collision models, and search of free-surface particles, which led to less-accurate fluid motions and non-physical pressure fluctuations. In the present study, how those defects can be remedied is illustrated by step-by-step improvements in respective processes of the revised MPS method. The improvement of each step is explained and numerically demonstrated. The numerical results are also compared with the experimental results of Martin and Moyce (1952) for dam-breaking problem. The current numerical results for violent free-surface motions and impact pressures are in good agreement with their experimental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.362-366
• /
• 2007

As the industry of 21C has been developed, the gas industry has been grown and its convenience but it accompany risk for using gas. Therefore, we designed a vent area to prevent the collapse of the booth by the explosion pressure during test. The explosion booth was installed fur training safety supervisors to aware the risk of gas explosion. The vent area was designed based on the exhaust model of NFPA 68. It was calculated at $2.8297m^2$ for LPG and at $3.0518m^2$ for NG.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.47-55
• /
• 1995

Cylindrical chokes are used widely as components of hydraulic equipments. The dynamic charac teristics between flowrate and pressure drop through the cylindrical chokes were discussed by the frequency characteristics of the chokes. It was assumed no pressure recovery occured at the downstream neighborhood of the choke. The pulsating jetflow from outlet of cylindrical chokes shows very complex behaviours which are quite different from the steady jetflow but it is not clarified quantitatively. In order to utilize the chokes as a flowmeter, it is indispensable to discuss the estimation of the dynamics of pressure drop in the downstream jetflow region of cylindrical chokes. In this experimental study, the dynamic behaviours of the jetflow in the downstream region of cylindrical chokes are investigated precisely by using flow visualization. In the results of experimental sutdy, it is clarified that the retachment length depended on pressure wave is compared with it depended on velocity wave.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.653-659
• /
• 2002

This paper describes a probabilistic fracture mechanics(PFM) analysis based on Monte Carlo(MC) simulation. In the analysis of CANDU pressure tube, the depth and aspect ratio of an initial semi-elliptical surface crack, a fracture toughness value and delayed hydride cracking(DHC) velocity are assumed to be probabilistic variables. As an example, some failure probabilities of piping and CANDU pressure tube are calculated using MC method with the stratified sampling MC technique, taking analysis conditions of normal operations. In the stratified MC simulation, a sampling space of probabilistic variables is divided into a number of small cells. For the verification of analysis results, a comparison study of the PFM analysis using other commercial code is carried out and a good agreement was observed between those results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.398-398
• /
• 2019

최근 전 세계적으로 기상이변 현상이 과거에 비해 빈번하게 발생하고 있으며, 자연재해에 의한 피해도 증가하고 있다. 한국에서 주로 발생하는 자연재해로는 호우, 태풍, 대설 등이 있고 최근 10년(2008~2017) 동안 자연재해 피해액 약 3.4조 중 대설에 의한 피해액은 약 2,200억원으로 전체 자연재해 피해액 중 약 15%를 차지하고 있다. 과거 2014년 경주 리조트에서 폭설로 인해 지붕이 붕괴되어 10명이 사망하고 100여명이 부상당하는 사건이 발생하였고, 2018년 제주도 농가지역의 시설물 및 재배작물이 수십억의 피해를 입게 되는 등 대설로 인한 큰 피해를 입는 사례들이 나타나게 되어 대설피해에 대한 관심이 높아지고 있는 추세이며 겨울철 주요 자연재해 중 하나로 인식되고 있다. 본 연구에서는 취약성 분석을 위해 PSR구조인 압력지수(Pressure), 상태지수(State), 대응지수(Response)로 인자들을 나누고 엔트로피 방법을 이용하여 전라도 지역 41개 시군구를 대상으로 가중치를 산정하였으며 이에 따른 결과 값들로 전라도 지역 41개 시군구에 대한 취약성 분석을 실시하였다. 그 결과 대설에 취약한 지역들을 순위로 도출해낼 수 있었다. 본 연구에서 도출해낸 결과를 바탕으로 하여 대설에 가장 취약한 지역들을 중심으로 대응 방안을 마련하여 대설에 대비한다면 효과적인 도움을 줄 수 있을 것으로 판단된다.