• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.69-74
• /
• 2005

A study of the utilization of inert gas generator(IGG) that generates a large amount of inert gas for the fire extinguishing equipment was performed. In this study, the fire extinction performance of gas generated from a 1GG which is implemented to a gas turbine was investigated. A simulated mixture gas of which composition is the same as that of the gas generated from ICG was used in all experiments. First, the extinction concentration was measured using a cup burner method. The extinction design concentration and the volume of extinction space was calculated by applying the obtained extinction concentration to a method recommended by NFPA 2001. In practical respects, the fire extinction performance of IGG-generated gas was confirmed through the fire suppression experiment within a $2m\times2m\times2m$ room.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.5
• /
• pp.418-422
• /
• 2003

평판형 유도결합 플라즈마 식각장비(inductively coupled plasma etcher)를 이용하여 각종 공정조건들에 따른 GaAs의 식각특성을 연구하였다. 공정변수들은 ICP 소스파워(0-500 W), RIE 척파워(0-150 W), 가스 종류($BCl_3$, $BCl_3$/Ar, $BCl_3$/Ne) 및 가스혼합비였다. $BCl_3$ 가스만을 이용하여 GaAs를 식각한 경우보다 25%의 Ar이나 Ne같은 불활성 기체를 혼합한 $15BCl_3$/5Ar, $15BCl_3$/5Ne 가스를 이용한 경우의 식각률이 더 우수한 것을 확인하였다. 그리고 50% 이하의 Ar이 혼합된 $BCl_3$/Ar의 경우는 높은 식각률 (＞4,000 $\AA$/min)과 평탄한 표면(RMS roughness : ＜2 nm)을 얻을 수 있었지만 지나친 양(＞50%)의 Ar의 혼합은 오히려 표면을 거칠게 하거나 식각률을 떨어뜨리는 결과를 가져왔다. 그리고 20 sccm $BCl_3$, 100 W RIE 척파워, 300 W ICP 소스파워, 공정압력이 7.5 mTorr인 조건에서의 GaAs의 식각결과는 아주 우수한 특성(식각률: ∼ 4,000, $\AA$/min, 우수한 수직측벽도: ＞$87^{\circ}$, 평탄한 표면: RMS roughness : ∼0.6 nm)을 나타내었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2006.04a
• /
• pp.247-252
• /
• 2006

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.193-194
• /
• 2002

최근 복사적, 화학적 활성 가스 및 원소 탄소(EC)의 전 지구적 규모의 양에 생체 소각의 기여도가 매우 크다는 것이 발표되고 있다. 지난 100년 동안의 생체 소각은 인간의 산업활동으로 인해 급격하게 증가되고 있고, 이제는 심각한 주요 배출원으로 인식되고 있다. 주요한 생체 소각으로는 산불, 아프리카 사바나 지역의 불, 경작지의 추수 후의 소각 그리고 생활을 위한 목재의 소각 및 연탄의 사용이 있다. 생체 소각에 의해서 발생되는 가스들은 환경적으로도 매우 심각하다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.473-480
• /
• 2017

Military helicopters are equipped with OBIGGS System to prevent an explosion caused by the projectile. OBIGGS warning lights up should only operate when sensing fault, but it frequently worked without malfunction in the initial production process and the design improvements were required. In this paper, the cause of OBIGGS abnormal warning lights up was reviewed, the improvements were established and proven.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.188-189
• /
• 2014

코스트 저감과 연비 향상을 위한 부품 중 반복 하중과 내열성 부품의 적용이 증대하고 있다. 기존의 자동차 부품에서는 펄라이트가 석출되기 때문에 고탄소 철계 부품에 팩크로마이징 공정을 이용한 크롬탄화물을 형성하면서 탄화수소계 가스를 투입하므로서 기존의 불활성 분위기를 깨고 비평형상태로 분위기를 유지함으로 높은 경도의 $(Cr,Fe)_{23}C_6$와 $(Cr,Fe)_7C_3$ 복합 탄화물의 형성과 이에 의한 마찰계수 변화를 관찰하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.29-34
• /
• 2013

The welds tent to be weakened if it is exposed to the air during the welding process. In titanium welding with Gas Tungsten Arc Welding, inappropriate colors of the welds, such as purple/red, blue, yellow, gray, white and pink represents that it is contaminated by oxygen and nitrogen in the air. Shielding gases can be used to protect welds from the contamination. In addition, Weld metal and heat affected zone (HAZ) are also shielded from the air when it is cooled down to the room temperature. In this paper, appropriate shielding gases for the shape and form of Trailing Shielding Jig and torch shielding ($13{\sim}20{\ell}/min$), after shielding ($22{\sim}30{\ell}/min$), and back shielding ($25{\sim}30{\ell}/min$) are studied.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.405-410
• /
• 2011

High-performance of an electric double layer capacitance (EDLC) electrode was prepared by the amino-fluorination of activated carbon by using $NF_3$ gas. The pore structure and surface chemistry were investigated based on the specific capacitance of EDLC. The amino-fluorination of activated carbon introduced functional groups of nitrogen and fluorine which are beneficial for the specific capacitance of EDLC without the change of pore structures. The E-NF100AC electrode, which has nitrogen and fluorine functional groups less than 1 at%, showed the highly improved specific capacitance of 528 (${\pm}9$) F/g at 2 mV/s showing 122% improved value when comparing with that of non-functionalized E-RAC electrodes. Whereas, the E-NF200AC electrode, which has nitrogen and fluorine functional groups over 1 at%, showed the decreased specific capacitance because of perfluorinated introduction. So, it is concluded that the proper contents of nitrogen and fluorine groups improved the specific capacitance of EDLC.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.51-59
• /
• 2001

Column and box tests were performed to investigate the removal efficiency of NAPL using the surfactant enhanced flushing In heterogeneous medium. Homogeneous Ottawa sand and heterogeneous soil were used to verify the increase of remediation efficiency for the surfactant enhanced flushing in column test. Box tests with two different heterogeneous sub-structure were performed to quantify the capability of the surfactant enhanced flushing as a remediation method to remove NAPL from the heterogeneous medium. Two different grain size sand layers were repeated in the box to simulate the heterogeneous layer formation and the modified fault structure was built to simulate the fault system in the box. O-xylene as a LNAPL and PCE as a DNAPL were used and oleamide as a non-ionic surfactant. The maximum NAPL effluent concentration with 1% oleamide flushing in the homogeneous column test increased about 460 times compared to that with only water flushing and about 250 times increased in the real soil column test. In heterogeneous medium, the maximum effluent concentration increased about 150 times in 1% oleamide flushing and most of NAPL were removed from the box within 8 pore volume flushing, suggesting that the removal efficiency increased very much compared to in only water flushing. Results investigated the capability of the surfactant enhanced remediation method to remove NAPL even in heterogeneous medium.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.152-158
• /
• 1994

Diamondlike carbon thin film have been fabricated using methane as a reactive gas by plasma enhanced chemical vapor deposition. Effects of hydrogen gas on the optical properties of the thin film has been investigated. When the hydrogen was used as a secondary gas, the role of hydrogen changed with deposition power unlike inert gases such as Ar and He. From the changes of optical band gap and FT-IR analysis, it was predicted that the chemical etching, sputtering of C-H bond by hydrogen and the implantation of hydrogen into the thin film could occur. The validity of the possibilities was confirmed by examining the effect of secondary gases such as Ar and He.