• Journal of Ginseng Research
• /
• 제21권2호
• /
• pp.85-90
• /
• 1997

This study was carried out to clarify the cause of incompatibility in interspecific hybrid plant between Panax ginseng and p. quinquefolium. The floral structure of F,(p.g. x p.q.) hybrid was normal because the redundant anther was 0.2 mm longer than pistil in Fl hybrid and the size and structure of redundant carpel in F, hybrid were similar to P. ginseng and p. quiquefolium Pollens of $F_1$ hybrid did not germinate on stigma of P-quinquefolium but germinated well on stigma of P. ginseng. Pollen tube was able to penetrate styles completely and seed harvest rate was 16.8% in field. However on stigma of $F_1$ hybrid, Pollen did not germinate when P. ginseng was used as male Parent. In addition, the growth of pollen tube was halted on style and seed was not set when P qlfinquefoEi2a was used as male Parent. These suggest that the inhibitor of pollen germination present on stigma caused $F_1$ hybrid sterility. It took 5 hours for pollen grains to germinate, 12 hours to arrive at in trance of ovule, 16 hours to penetrate micropyles in Panax ginseng.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.414-418
• /
• 1999

Typical metal oxide thin films having optical and electrical properties are widely used as inorganic functional materials. Liquid phase deposition(LPD) method, a new low temperature process, has been developed for the several advantages of no vacuum system, low cost, high throughput, and low processing temperature(<$50^{\circ}C$). Silica powder was added to 40wt% hydrofluoro-silicic acid($H_2$SiF\ulcorner) to obtain an immersing solution of silica-saturated hydrofluorosilicic acid solution. Boric acid solution was continuously added in the range from 0 to 0.05M to prepare supersaturated hydrofluorosilicic acid solution. LPD $SiL_2$film was formed with the variation of added amount of $H_2$O. The SiO$_2$thin film could be prepared from hydrofluorosilicic acid by LPD method. The thickness of LPD $_SiO2$film was influenced by the boric acid concentration and added amount of $H_2$O. Silicon in thin film existed as SiF\ulcorner by Raman spectrum.

• 한국수소및신에너지학회논문집
• /
• 제20권4호
• /
• pp.323-330
• /
• 2009

Efficiency of a fuel cell is determined by the generated water. If water is not removed sufficiently, water will be accumulated at GDL, which causes flooding. Therefore, water control is regarded as a crucial factor to sustain fuel ell performance. In this study, PTFE coating on the surface of carbon paper was carried out to establish optimum process for hydrophobic treatment of GDL. Carbon paper was immersed at different concentrations of nano-sized PTFE coating solution. Their characteristics were analyzed systematically by FE-SEM, water contact angle, cyclic voltamogam, XRD and FT-IR. The quantitative correlation between the amount of coated-PTFE on a carbon paper and concentration of coating solution was carefully investigated. It is suggested that the amount of PTFE-coating on a carbon paper can be managed by means of controling concentration of coating solution.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.48-54
• /
• 2006

Hydroxyapatite $(HAp,\;Ca_{10}(PO_4)_6(OH)_2)$/alumina composites were fabricated with the addition of fluorides, such as $MgF_2$ and $CaF_2$. In this study, the effect of fluorides on the inhibition of phase decomposition and the mechanical properties of HAp was investigated. Due to the higher solubility of F ion in HAp structure, $MgF_2$ additive was more effective compared to $CaF_2$ additive in the lowering decomposition temperature of HAp. Therefore, the dissociation tendency of HAp was fully inhibited below $1400^{\circ}C$. The mechanical properties of HAp composites with $MgF_2$ additive showed higher value (flexural strength: $\~170MPa$, Vickers hardness: $\~7\;GPa$, fracture toughness: $\~1.5\;MPam^{1/2}$) compared to $MgF_2-free$ composites. The linear thermal expansion coefficient of HAp composites with $MgF_2$ showed the value of $16.4\times10^{-6}/^{\circ}C\;at\;20\~400^{\circ}C $.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1163-1169
• /
• 2012

Destruction and removal efficiency (DRE) of $SF_6$ was tested with low degrees of ionization. The applied dose of ionization energy varied from 63.70 to 212.34 kGy. The initial concentration and flow rate of $SF_6$ gas were 1,000 ppm and 50L/min, respectively. In order to increase the DRE, injection of conditioning agent ($H_2$) were conducted. The DRE of $SF_6$ increased about 2 times with injection of $H_2$ gas.

• 대한임상독성학회지
• /
• 제8권1호
• /
• pp.43-45
• /
• 2010

A 22-year-old woman was referred to our emergency department for the treatment of a chemical injury on her arm. She had accidentally spilled 99% trifluoroacetic anhydride (TFAA) over her left forearm during an organic chemistry experiment. She visited a primary care unit, and then she was referred to our hospital for inactivation of the released fluoride ions. Her skin lesions were different from those caused by hydrofluoric acid (HF) injury. The injured area showed painful whitish maculae and patchy areas with accentuated rim. No vesiculation and bulla formation was detected. We intradermally injected a 5% solution of calcium through a 24-gauge needle into the burned skin. After the injection, she complained of more severe pain. Although TFAA contains fluorine, it does not release free fluoride ions on contact with the skin, unlike HF. In fact, application of calcium gluconate for TFAA burns is not recommended. Rather, it should be avoided since it increases pain and local abscess formation.

• 마이크로전자및패키징학회지
• /
• 제7권1호
• /
• pp.35-40
• /
• 2000

Teflon-like fluorocarbon thin film was deposited on various substrates by vapor deposition using PFDA (perfluorodecanoic acid). The fluorocarbon films were characterized by static/dynamic contact angle analysis, VASE (Variable-angle Spectroscopic Ellipsometry) and AFM/LFM (Atomic/Lateral Force Microscopy). Based on Lewis Acid/Base theory, the surface energy ($S_{E}$) of the films was calculated by the static contact angle measurement. The work of adhesion (WA) between de-ionized water and substrates was calculated by using the static contact data. The fluorocarbon films showed very similar values of the surface energy and work of adhesion to Teflon. All films showed larger hysteresis than that of Teflon. The roughness and relative friction force of films were measured by AFM and LFM. Even though the small reduction of surface roughness was found on film on $SiO_2$surface, the large reduction of relative friction farce was observed on all films. Especially the relative friction force on TEOS was decreased a quarter after film deposition. LFM images showed the formation of "strand-like"spheres on films that might be the reason far the large contact angle hysteresis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.119.2-119.2
• /
• 2014

대기환경 규제가 강화됨에 따라 기존 기술 대비 획기적인 성능과 가격 경쟁력을 갖춘 새로운 대기환경 기술에 대한 수요가 지속적으로 요구되고 있다. 특히 최근에는 종래의 분진, 이산화황가스 및 질소산화물에 대한 규제와 더불어 지구온난화가스인 이산화탄소, 과불화화합물 (Perfluorocompounds, PFCs), 메탄가스 등에 대한 규제가 강화되면서 이에 대응할 수 있는 대기환경 기술의 수요가 늘고 있다. 한국기계연구원에서는 지난 10 여 년간 지구온난화가스이자 난분해성 가스인 메탄 및 PFCs 가스를 플라즈마 화학반응 공정을 통해 분해하는 연구를 수행해왔으며, 이를 바탕으로 산업에 적용할 수 있는 기술개발도 병행하여 수행하였다. 현재 개발된 기술 가운데 일부는 산업에 실제로 적용되고 있으며, 이를 통해 산업현장에서는 지구온난화가스는 물론 질소산화물과 같은 다른 종류의 규제물질도 동시에 저감할 수 있었다. 본 발표에서는 플라즈마를 활용하여 난분해성 가스인 메탄과 PFCs를 분해하는 기술의 특성을 살펴보았으며, 이를 바탕으로 산업현장에 적용된 대기환경기술이 어떻게 활용되고 있는지를 소개하고 있다. 본 발표에서 다루게 될 플라즈마 발생기술은 펄스 코로나, 유전체장벽방전, 마이크로웨이브 토치, 아아크 토치 등이며, 플라즈마 발생조건은 수 torr 이하의 진공조건부터 및 대기압 조건에 이르고 있다.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.115-118
• /
• 2005

모델 고분자 미셀(서로 결합하거나, 결합하지 않는 두 경우)의 구조를 분석하기 위해 중성자 소각 산란(small angle neutron scattering)법을 이용하였다. 소수성 결합체의 응집수와 농도의 증가에 따른 정렬상태의 변화를 폴리에틸렌글라이콜(PEG, 6 K나 10 K고몰 분자량) 끝에 불화알킬그룹(pefluoroalkyl groups $(-(CH_2)_2C_OnF_{2n+1}$, (n = 6, 8,혹은 10)이 붙은 고분자용액을 이용하여 분석하였다. 결합체의 응집수는 소수성 말단기의 길이에 의해서만 주로 결정이 되고, 고분자의 농도나 온도에 의해 영향을 받지 않는다. 또한, 서로 결합하는 고분자 미셀과, 서로 결합하지 않는 고분자 미셀간에도 결합수에는 차이가 없다. 이러한 모델계는 농도가 증가함에 따라서 체심 입방구조로 정렬된다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.137-140
• /
• 2012

현대의 건축 재료는 각종 고분자 화합물의 비중이 커지고 있어 건축 재료가 연소할 때 발생하는 가스의 성분비가 천연재료를 이용하던 과거의 건축물과 차이를 보인다. 실제로 근래의 건축재료 연소가스의 정성분석결과에서도 천연재료의 연소가스에서 발견되는 CO, $CO_2$ 외에도 HF, HCN, HBr, HCl, NO, $NO_2$, $SO_2$등의 화학종이 발견되고 있다. 이러한 화학종들은 고분자 화합물에서 발생하는 것으로 분석되며, 건축 재료에서 화합물의 비중이 높아지는 만큼 향후 이러한 화학종들이 건축물의 화재에서 대피의 주요 방해요인으로 작용할 수 있다. 이에 본 연구에서는 HF를 대상으로 동물 노출실험을 통하여 얻은 결과와 HF에 대한 기존연구를 비교 분석하여 HF의 독성에 대한 기초 연구를 수행하였다.