• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.07a
• /
• pp.109-130
• /
• 1995

지난 반세기간에 우리나라에 채소 육종은 주요 채소의 주년공급을 가능하게 하였으며, 토지 생산성의 향상, 상품화율의 증대, 품질의 향상 등의 면에서도 괄목할 만한 성과를 거두었고 인공교잡은 물론이고 웅성불임성과 자가불화합성의 활용에 의한 1대잡종 품종의 일반화로 채소 산업의 발전에 크게 기여하였다. 앞으로는 기왕의 업적을 심화시키는 한편, 생산비를 절감하기 위한 생력화, 기계화 재배용 품종 및 내제초제성 품종의 개발 환경보호 및 식품안정성의 확보를 위한 내병층성 품종 개발, 수출시장과 다양화하는 국내의 시장기호에 대응하고 가공 식품의 표준화된 품질관리를 지원할 수 있도록 품질 면에서의 개량과 신작물 또는 신생태형 품종의 개발에도 더욱 노력이 필요하다. 이러한 육종목표를 달성하기 위한 유전자원의 확보는 더욱 어려워질 것이며 유전 양식이 복잡하고, 환경요인의 작용이 상대적으로 크기 때문에 전통적인 육종 방법만으로는 목표달성에 필요한 인적, 물적, 시간적 소요가 훨씬 증가될 전망이다. 유전변이의 창성 및 확대, 유용 대립인자의 도입, 동정 및 선발, 그리고 종자생산을 위한 자가 불화합성 및 웅성불임성과 개화·수정 관련 유전인자의 발현 조절에 분자유전학의 보완적 역할이 기대되며 이렇게 되면 전통육종과 분자유전학간의 잡종강세로 품종 개량의 효율은 크게 높아질 것이다.

• Microbiology and Biotechnology Letters
• /
• v.17 no.1
• /
• pp.51-55
• /
• 1989

The conjugally transferred TOL plasmid or NAH plasmid was stably maintained and expressed in n-alkane assimilating Pseudomonas putida KCTC 2405. However, these plasmids were not able to coexist in this strain because of incompatibility. The incompatibility of TOL and NAH plasmid was bypassed using CAM::TOL* plasmid, which was constructed by the transposition of only tol gene without incompatibility system in TOL plasmid into CAM plasmid. p. putida 3SK capable of growing on m-toluate, naphthalene, camphor, and n-alkane(C8-C24) was constructed by the conjugal transfer of NAH plasmid into n-alkane assimilating p. putida SK carrying CAM:: TOL* plasmid. CAM::TOL＊ plasmid in p. putida 3SK was stable on the selective media but unstable on the nonselective media.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.109-112
• /
• 2006

A fluorine-doped diamond-like carbon (F-DLC) stamp which has high contact angle, high UV-transmittance and sufficient hardness, was fabricated using the following direct etching method: F-DLC is deposited on a quartz substrate using DC and RF magnetron sputtering, PMMA is spin coated and patterned using e-beam lithography and finally, $O_2$ plasma etching is performed to transfer the line patterns having 100 nm line width, 100 nm line space and 70 nm line depth on F-DLC. The optimum fluorine concentration was determined after performing several pre-experiments. The stamp was applied successfully to UV-NIL without being coated with an anti-adhesion layer.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.12
• /
• pp.755-760
• /
• 1999

Various fluoride films were investigated for a gate insulator of thin film transistor application. Conventional oxide containing materials like $SiO_2\;Ta_2O_5\; and \; Al_2O_3$ exhibited high interface states which lead to an increased threshold voltage and poor stability of TFT. In this paper, we investigated gate insulators using a binary matrix system of fluoride such as $CaF_2,\; SrF_2\; MgF_2,\; and\; BaF_2$. These materials exhibited an improvement in lattice mismatch, interface state and electrical stability. MIM and MIS devices were employed for an electrical characterization and structural property examination. Among the various fluoride materials, $CaF_2$ film showed an excellent lattice mismatch of 5%, breakdown electric field higher than 1.2MV/cm and leakage current density of $10^{-7}A/cm^2$. MIS diode having $Ca_2$ film as an insulation layer exhibited the interface states as low as $1.58\times10^{11}cm^{-2}eV^{-1}$. This paper probes a possibility of new gate insulator materials for TFT applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.145-146
• /
• 2006

A fluorine-doped diamond-like carbon (F-DLC) stamp which has high contact angle, high UV-transmittance and sufficient hardness, was fabricated using the following direct etching method: F-DLC is deposited on a quartz substrate using DC and RF magnetron sputtering, PMMA is spin coated and patterned using e-beam lithography and finally, O2 plasma etching is performed to transfer the line patterns having 100 nm line width, 100 nm line space and 70 nm line depth on F-DLC. The optimum fluorine concentration was determined after performing several pre-experiments. The stamp was applied successfully to UV-NIL without being coated with an anti-adhesion layer.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.334-341
• /
• 1989

Toluate degradative plasmid from Pseudomonas cepacia SUB37 was determined to be molecular weight as $79.3\times 10^6$

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.29-32
• /
• 1999

$GaF_3$ films were directly grown on p' and p-type GaAs(100) substrates using a $SF_6$ plasma discharge system. GaAs MIS(Meta1-Insulator-Semiconductor) capacitor was successfully fabricated for about 1 hour at temperature $290^{\circ}C$ using the as-grown $GaF_3$ films. The as-grown films on p'-GaAs exhibited a current density of less than 6.68 $\times$ $1O^{-9}$ A/$cm^2$ at a breakdown field of 500kV/cm and a refractive index of 2.0 ~ 2.3 at a wavelength of 632.8 nm. The dielectric constant was about 5 derived from 1 MHz capacitance-voltage (C-V) measurements. Dielectric dispersion of the fluoridated films on p'-GaAs measured ranged from 100 Hz to 10 MHz was not observed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1132-1138
• /
• 2005

Recently, production and use of freon substances are restrained due to depletion of ozone layer and global warming. In this aspect of environmental problems, the best solution is to use the natural refrigerant such as ammonia. Thus, this study is to find the optimal operating conditions by comparing the performance between the shell and tube type and shell and disk type heat exchangers using the ammonia refrigerant, and to verify the superiority of the shell and disk type heat exchanger that is not used in field of refrigeration and air conditioning. Finally, this study shows that the shell and disk type heat exchanger is applicable to the ammonia refrigeration system, and this system minimizes the refrigerant charge and installation space.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.1
• /
• pp.151-159
• /
• 2019

Objective: This study aimed to investigate the relation between rinsing time and the change in enamel surface after fluoride application on the enamel surface. Methods: We recruited two sample groups with different mouth rinsing times. While one group rinsed the teeth immediately after applying acidulated phosphate fluoride (APF) gel, the other group rinsed the teeth 30 minutes after APF gel application. In each group, we performed the following four-step experiment: (i) apply APF gel on the teeth, (ii) rinse the teeth, (iii) immerse the teeth in orange juice, and (iv) measure enamel surface microhardness and scan enamel surfaces. Results: The group that rinsed 30 minutes after treatment exhibited greater microhardness than the group that rinsed immediately after fluoride treatment. The former also showed smooth and regular crystallization, whereas the latter showed rough and damaged crystallization and irregular surfaces. Conclusions: Based on these observations, we conclude that delaying the rinsing time improves the dental caries preventive effect of fluoride.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.17-32
• /
• 1996

It is important to understand the operating mechanism and force system of fixed appliance that most effective for individual tooth movement in various orthodontic appliances. The archwire system of fixed appliance is devided into 3 types, which is continuous arch, segmented arch and sectional arch. The last two types have longer interbracket distance and simple force operating points, so it is easy to control force system by operator. But the continuous arch has shorter interbracket distance and various bracket geometry, so it is hard to control and anaylze the force system. The purpose of this study was three dimentional force and moment analysis of continuous arch system by finite element method, which is similar situation to three dimentional elastic beam in structural engineering. Several sample form of various bracket geometry and artificial lower crowding typodont made by author were constructed, analyzed and compared each other. The results were as follows : 1. The force magnitude is linear proportional to the degree of displacement or tilting of the bracket. 2. The force magnitude is inversely non-linear proportional to the interbracket distance. 3. In three dimensional typodont model, while the force can be compared with that of the sample form in the area where adjacent bracket geometry is simple, the force is much more than the expected value in the area where adjacent bracket geometry is complex.