• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.43-51
• /
• 1986

Triaxial compression tests were performed with control of vertical stress, confined pressure(${\sigma}_H$), and injection velocity by means of impervious soil samples with a different grain size, density and grout density. By measuring pore water pressure at the time of vertical fracturing around the bore-hole, relationships between main factors are described, and the factors are pore water pressure, confined pressure, vertical fracturing injection pressure(${\sigma}$) and the tension strength(${\sigma}_t$). The hydraulic fracturing of soft clay was occurred at the pressure which was less than the pressure obtained by the theory of elasticity. It was found that the above result was the influence of pore water pressure due to injection pressure($U_a$) and pore water pressure due to confined pressure($U_i$). Therefore, the vertical injection pressure at the time of fracturing needs to be changed as follows. $${\sigma}=2{\cdot}{{\sigma}_H}-(U_a+U_i)+{\sigma}_t$$.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.56-61
• /
• 1989

In the present paper, we intented to analyze and to compare the different seed dormancy of two legume plants, Albizzia and Cercis. We found two different types of seed dormancy: one type of dormancy in Albizzia seed was caused by the water impermeability, and other type of seed dormancy was found in Cercis and it was induced by inhibitors. We confirmed that the extract substances from Cercis seed seemed to have strong regulational functions on the inhibition of seed germination and primary root growth of lettuce seed.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.175-185
• /
• 2001

A numerical model is represented to calculate the reflected waves, the runup of waves and the wave induced velocities on impermeable slopes for the normally incident wave trains of nonlinear monochromatic wave and solitary wave. The finite amplitude shallow water equations with the effects of bottom friction are solved numerically in time domain using an explicit dissipative Lax-Wendroff finite difference method. The numerical model is verified by comparisons with the other numerical results, the measured data and asymptotic results. It is found that the uprushing and downrushing of incident waves may be accurately predicted by the present numerical model. Therefore, the present numerical model can be applicable to swells as well as long waves.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.182-182
• /
• 2011

2010년 9월 21일 오전부터 서울과 인천 등 수도권 지역에 최대 200mm가 넘는 집중호우가 내렸다. 이로 인해 도림천에서는 하천 복원 공사가 한창이었으나, 공사가 진행된 지점에서 자연형하천 공법의 훼손이 심각하게 발생하였다. 본 연구에서는 집중호우로 인한 자연형하천 공법의 훼손 현황을 현지조사를 통해 살펴보고, 이의 원인을 검토, 분석하여 복구대책 수립에 지침이 되도록 하였다. 자연형하천 공법의 훼손은 주로 하천의 수리적인 안정성을 고려하지 않고 설치함으로써 인위적으로 흐름에 지장을 초래하기 때문에 발생하였다. 흐름의 유속을 고려하지 않는 수생식물 식재, 하도 내에 설치된 진입계단, 전망데크, 불투수성의 자전거길 및 저수호안공의 훼손은 추후 흐름의 유속과 와류 등을 고려한 수리적인 안정성 확보가 중요함을 시사하였다. 한편, 저수호안에 식재한 갯버들+자연석 호안공은 이번 호우에도 어느 정도 대응 가능하였음을 감안할 때, 흐름의 유속이 빠르다고 하여 자연석 호안공을 시멘트로 메워 식생을 도입하지 않았던 공법에 대한 재검토가 필요함을 알 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.272-272
• /
• 2021

해안지역에서 염수침입을 저감하기 위한 지하댐은 전세계적으로 많이 사용되고 있으며, 일반적으로 염수를 포함하고 있는 지하수의 이동을 차단하는 역할을 한다. 이러한 차단으로 인해 지하댐 내 바다 방향으로 향해있는 영역과 해안 내륙에서의 오염물질과 염분의 축적이 발생될 수 있다. 기존의 염수칩입을 저감하기 위해 이용되는 지하댐의 연구는 대부분 불투수성으로 고려하여 수행되었으나 본 연구에서는 투수성 다공성 지하댐에 대한 효과를 수치적 기법을 이용하여 분석하였다. 이러한 투수성 다공성 지하댐은 해수위의 변화에 따라 염수와 담수의 흐름을 원활하게 할 수 있으며, 이로 인해 오염물질과 염분의 축적이 최소화 될 수 있을 것으로 기대할 수 있다. 본 연구에서는 상용 유동모의 및 해석 소프트웨인 ANSYS CFX 모형을 이용하여 투수성 다공성 지하댐의 유효높이와 유효폭 그리고 단일 그리고 다중 양수에 따른 염수침입의 특성을 분석하였으며, 이에 대한 지하댐의 최적 위치에 대한 분석을 수행하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.360-366
• /
• 2014

In this study, effect of types and replacement ratio of alkali activator on compressive strength of ground granulated blast furnace slag mortar has been reviewed. Types of alkali activator are NaOH, $Ca(OH)_2$, $Na_2SO_4$, and KOH. Replacement ratio of alkali activator is 7.5, 10, 12.5, and 15%, respectively. As results, under high temperature curing condition, 1 day compressive strength development with NaOH and KOH was higher than that of $Ca(OH)_2$ and $Na_2SO_4$. Regardless of types of alkali activator, compressive strength increased with increasing pH. This can be explained by the fact that impermeable film on the surface of slag which is generated when slag contacts water has been destroyed by alkali activator, and this promotes hydration reaction. Also, 1 day age compressive strength of specimen with high temperature curing was higher than that of specimen with standard curing. 28 days age compressive strength of specimen with high temperature curing was less than or equal to that of specimen with standard curing.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.5-15
• /
• 2011

Conventional designs of landfill covers use geosynthetics such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature or humidity in landfill sites cause the development of cracks or structural damage inside the final cover. This study examined the application of a Self Recovering Sustainable Liner (SRSL) as an alternative landfill final cover material. SRSL consists of double layers, which have chemicals, can generate precipitates filling the pores of the layers by chemical reaction. The interface material forms an impermeable layer and in case of internal cracks, the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing flexible wall permeameter tests to prove that the hydraulic conductivity is lower than the regulations and unconfined compression tests to judge whether the strength satisfies the restriction for the landfill final cover. Furthermore, the environmental impacts on the permeability and strength were evaluated. The experimental results show that the SRSL has lower hydraulic conductivity and higher strength than the regulations and is little influenced by climatic changes such as wet/dry or freeze/thaw process.

• Journal of Environmental Impact Assessment
• /
• v.15 no.2
• /
• pp.157-163
• /
• 2006

The purpose of this study is to understand imperviousness impact for the characteristics of stormwater runoff and water temperature. The land-use map was used to estimate the watershed imperviousness(percent of impermeable area) and the RMS(Remote Monitoring System) was used to evaluate the stormwater runoff of watershed. This study was investigated for two streams(Jiam and Gongji) in Chunchon City. The detailed results of these studies are as follows; The imperviousness(%) of two watersheds(Jiam and Gongji) estimated by spatial analysis which is main function of GIS were 0.24% and 24.16%. So, Gongji watershed as urban area was about 100 times than jiam watershed as forest area. In case of rainfall of low intensity, stormwater runoff flowrate in higher imperviousness area(Gongji) was more than it in forest area(jiam). Also, The time to peak flowrate(Tp) was short in Gongji stream and the water temperature difference between Gongji and Jiam stream was about $4.4^{\circ}C$ in summer.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.137-143
• /
• 2010

This research is a comparative analysis of the surface gloss of concrete depending on the coating material added to the cast, and includes analyses of the surface gloss of specimens made of cement mortar, with and without the addition of superplasticizer. In terms of coating material, the 7th material, which is part of a liquid packaging material, was shown to have the highest gloss, and was followed by the 3rd material, which uses transparent film. As the level of gloss is shown to vary depending on the material used for the coating film, it can be interpreted that the surface gloss can differ depending on surface particles and chemical composition factors. To make a concrete surface smooth, it is more effective to use a coating material with impermeability and a highly dense surface.