• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.591-594
• /
• 2008

Present study aims at the development of a reasonable boundary condition for a structure over inclined seabed in case of the numerical model with quadrilateral mesh system. The technique for the inclined impermeable/permeable boundary in the quadrilateral mesh is newly proposed. The new technique and LES-WASS-3D model (Hur and Lee, 2007) have been used for the investigation of the dynamics of fluid field, and validated through the comparison with a typical stair-type boundary condition. 3-Dimensional numerical model with Large Eddy Simulation is called LES-WASS-3D, and is able to simulate directly interaction of WAve Structure Sea bed/Sandy beach.

• Journal of Coastal Disaster Prevention
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2014

In order to examine the characteristics of tsunami run-up heights on impermeable/permeable slope, a numerical wave tank by upgrading LES-WASS-3D was used in this study. Then, the model were compared with existing hydraulic model test for its verification. The numerical results well reproduced experimental results of solitary wave deformation, propagation and run-up height under various conditions. Also, the numerical simulation with a slope boundary condition has been carried out to understand solitary wave run-up on impermeable/permeable slope. It is shown that the run-up heights on permeable slope is 52.64-63.2% smaller than those on the impermeable slope because of wave energy dissipation inside the porous media. In addition, it is revealed that the numerical results with slope boundary condition agreed well with experimental results in comparison with the results by using stair type boundary condition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.83-83
• /
• 2022

여러 분야의 연구자들이 지진해일의 위험에 대한 경각심을 가지고, 지진해일의 발생, 전파 그리고 수리현상을 해석하기 위해 많은 노력을 기울이고 있다. 해안지역에서 직접적인 피해를 입히는 지진해일의 충격파, 처오름, 월파, 침수 등에 관한 연구에 유사한 파형 특성을 가진 고립파를 많이 사용한다. 고립파는 비선형성과 분산이 균형을 이루는 가정에서 Korteweg-de Vries(KdV) 방정식을 만족하는 안정적인 이론파이다. 고립파의 파형분포는 수심에 의해 결정되고, 일정 수심 이상에서는 지진해일을 대신해 사용할 수 있다. 그러나 수심이 낮은 천해에서는 주기와 파장이 비현실적으로 짧아짐으로 지진해일을 대신하기에는 무리가 있다. 본 연구에서는 지진해일의 처오름 특성을 분석하기 위한 1:20 불투과성 경사면이 포함된 수치파동수조를 구성한다. 먼저, 일본 NOWPHAS(Nationwide Ocean Wave information network for Ports and HArbourS)의 관측자료를 이용하여 2011 동일본 지진해일과 고립파의 파형분포를 비교한다. 그리고 다양한 파형의 지진해일 생성할 수 있게 개발된 조파방법을 수치파동수조에 도입하여 수치해석을 수행한다. 수치해석결과, 지진해일의 처오름 높이가 고립파에 비해 최대 1.8배, 최소 1.13배, 평균 1.56배 증가한다.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.77-88
• /
• 1998

Wedge shaped isodoses are desired in a number of clinical situations. Hard wedge filters have provided nominal angled isodoses with dosimetric consequences of beam hardening, increased peripheral dosing, nonidealized gradients at deep depths along with the practical consequendes of filter handling and placement problems. Dynamic wedging uses a combination of a moving collimator and changing monitor dose to achieve angled isodoses. The segmented treatment tables(STT) that monitor unit setting by every distance of moving collimator, was induced by numerical formular. The characteristics of dynamic wedge by STT compared with real dosimetry. Methods and Materials : The accelerator CLINAC 2100C/D at Yonsei Cancer Center has two photon energies (6MV and 10MV), currently with dynamic wedge angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$. The segmented treatment tables(STT) that drive the collimator in concert with a changing monitor unit are unique for field sizes ranging from 4.0cm to 20.0cm in 0.5cm steps. Transmission wedge factors were measured for each STT with an standard ion chamber. Isodose profiles, isodose curves, percentage depth dose for dynamic wedge filters were measured with film dosimetry. Dynamic wedge angle by STT was well coincident with film dosimetry. Percent depth doses were found to be closer to open field but more shallow than hard wedge filter. The wedge transmission factor were decreased by increased the wedge angle and more higher than hard wedge filters. Dynamic wedging probided more consistent gradients across the field compared with hard wedge filters. Dynamic wedging has practical and dosimetric advantages over hard filters for rapid setup and keeping from table collisions. Dynamic wedge filters are positive replacement for hard filters and introduction of dynamic conformal radiotherapy and intensity modulation radiotherapy in a future.