• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.5-18
• /
• 2023

As a result of the survey on the emission status of fluorine-based chemicals in Korea, 13 kinds of substances, including hydrogen fluoride (91%) and perfluorocarbons (5%), were emitted in workplaces. By regional groups, about 98% was emitted in the Gyeongbuk, Gyeonggi and Chungcheong regions, and about 98% in three sectors of industry related to manufacture of electronic parts, chemicals and non-metallic mineral products. The detection status of PFOS and PFOA in domestic main rivers was continuously detected in the Nakdong River, the Geum River and the Anseong Stream estuary with high fluorine-related chemical emissions, and four sites of PFOS and two sites of PFOA were detected for the first time in 2021. PFOS and PFOA were continuously detected in relatively high concentrations in the rivers where there were many semiconductor and display related sectors of industry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.62-69
• /
• 2000

Part of the locally applied, as well as the systemic applied, fluoride is absorbed into the body to aid in the prevention of caries. However, beyond a certain level, systemic distribution of fluoride can cause chronic fluorosis with attending systemic symptoms and dental fluorosis. Thus it is vital to determine the level of fluoride with minimal side effects which will provide optimal caries prevention. A commonly utilized method of regressively determining fluoride intade is to measure the fluoride concentration of excreted urine. Thus, the aim of this study was to determine the clearance time and concentration of fluoride in urine after administration of various doses of fluoride using HMDS-diffusion technique and fluoride ion electrode(Orion, 96-09, U.S.A.). Urine samples were collected in 7 adult subjects every morning after administration of fluoride supplements such as no fluoride(control group), 1mg fluoride(group 1), 2mg fluoride(group 2), 3mg fluoride(group 3), 4mg fluoride(group 4). The obtained results were as follows 1. Mean urinary fluoride concentration of control group was $0.707{\pm}0.362ppm$. 2. Fluoride levels followed as group 4(4.076ppm). group 3(2.400ppm), group 2(1.494ppm), group 1(1.051ppm) at day 1 after fluoride administration. There were no statistical differences between the urinary fluoride concentration of group 1, 2, 3 and control group after day 2, but there was statistical difference between group 4 and control group at day 2(p<0.05). 3. Urinary fluoride concentration increased and plateaued according to increasing fluoride dosage. The increased concentration remained significantly higher till day 2, but after day 3, there was no significant difference compared to the control.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.121.2-121.2
• /
• 2016

PFA 라이닝 밸브 (PFA Lined Valve)는 고온 (~120oC) 고압 (~10 bar)에서 강한 부식성을 갖은 화학물질 (염산, 황산, 질산 등)을 이송시킬 수 있도록 내식성, 비점착성, 내열성 향상을 위한 불소계 수지 PFA (Perfluoroalkoxy)가 밸브 내면부에 가공되어 있으며, 고순도 화학약품 및 반도체 LCD 석유화학 제철 제약 분야 등의 제조공정에서 사용되고 있다. 미국 EPA (Environmental Protection Agency)에서는 석유화학 플랜트에서 발생되는 비산배출 (fugitive emission)의 대부분인 60% 정도가 밸브에서 발생된다고 보고하고 있으며, 근래 빈번한 불산 노출사고 내용을 매스컴에서 접할 수 있는 것처럼 PFA 라이닝 밸브가 설치되는 산업현장에서는 미소 누설에도 치명적인 인명피해 사고가 발생하기 때문에 국제규격에 따른 PFA 라이닝 밸브의 기밀누설에 관한 규제 및 관리가 중요하다. 본 논문에서는 가압진공법을 이용하여 PFA 라이닝 볼밸브의 비산배출 측정하였으며, 작동횟수/온도변화에 따른 PFA 라이닝 볼밸브의 비산배출 특성을 고찰하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.231-232
• /
• 2002

대기 중 휘발성유기화합은 오존생성의 전구물질 및 유해화학물질 그리고 일부는 악취물질로 작용하는 주요 대기오염물질로 주목받고 있으며, 여러 가지 VOCs의 배출원 중에서 세탁소도 주요 발생원중 하나로 주목받고 있다. 세탁에 사용되는 유기용제에는 퍼클로로에틸렌(PCE)과 불소계용제, 석유계 용제가 있는데 일본을 제외한 외국에서는 밀폐형기계인 PCE를 사용하고 있는데 반해, 우리나라에서는 약 95% 정도의 세탁소가 석유계 용제를 사용하고 있다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.926-933
• /
• 2012

Phosphoric acid used for the production of phosphate fertilizers is synthesized by the reaction of phosphate rock and sulfuric acid. As the reaction is exothermic, yield of phosphoric acid is poor at elevated temperature. Therefore, enhancement in its yield requires the process temperature be maintained by releasing the vapor ($80^{\circ}C$) containing HF and SiF4 through a vacuum cooler. However, these valuable resources; Fand Si, which can be utilized for the manufacture of refrigerant and polysilicon, respectively, are being wasted in the treatment process. We performed lab-scale experiments to estimate the amount of recoverable H2SiF6, a by-product of phosphoric acid manufacturing process. The experimental results showed a decrease of fluorine concentration by 0.12wt% in the liquid phase. Preliminary estimation showed a possible recovery of 5,509 ton/yr of fluorine considering the scale of the fertilizer manufacturing plant. Furthermore, field-scale experiment showed that H2SiF6 could be enriched in liquid phase from 0.35wt% to 7.33wt% and the vapor flow-rate from vacuum cooler was estimated at $51,000m^3/hr$. Anew, the efficiency of fluorine recovery in the pilot-scale experiment was found to be 76.74% and the production of H2SiF6 was estimated at 5,340 ton/yr.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.247-252
• /
• 2005

The typical treatment method for fluoride polluted water is the flocculation and precipitation method which usually is capable of reducing the fluoride concentration down to the level of about 10 ppm. However, this method is no longer effective for the treatment of contaminated water having less than 10 ppm of fluorides. To remove fluorides in polluted water from the fluoride concentration between 1 to 10 ppm, several adsorbents were prepared mainly based on an activated alumina and the fluoride removal efficiencies of the adsorbents were analyzed. The best fluoride removal efficiency was obtained when the activated alumina treated by sulfuric acid was used as the adsorbent. A proper calcination temperature for the sulfuric acid contained activated alumina was found to be about $500^{\circ}C$. An adsorption isotherm for the adsorbent was also obtained by using Freundlich model. The values of the constants in Freundlich isotherm model were calculated to be K=6.63 and 1/n=0.29 based on the results obtained from the series of batch type adsorption experiments.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.19-32
• /
• 2023

This study was conducted to remove fluorine (F) (initial concentration of 9.5 mg/L) from leachate of reclaimed mine waste dump site via different methods: (1) co-precipitation using Ca-based materials; (2) adsorption using activated carbon and fly ash; and (3) coagulation and sedimentation using alum. The F removal efficiencies of each case were estimated as 65.6% (Ca co-precipitation), 27.9% (adsorption of activated carbon), 71.5% (adsorption of fly ash), and 96.6% (alum coagulation and sedimentation). In addition, the applicability of the continuous treatment process using alum coagulation was evaluated by lab-scale experiments using simulated mine drainage containing F of lower (6.4 mg/L) and higher (15.7 mg/L) concentrations, and it was confirmed that the treatment of both cases met the domestic standard (below 3 mg/L) for discharged water in clean areas. Furthermore, the results of bench-scale field tests indicated that the water quality standard of discharged water could be satisfied with the proper operation and management of the process.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2012

The Government of South Korea has continued its effort to fixate virtuous circle of economic growth and climate change response to cope with international demands and pressure to commitment for greenhouse gas reduction effectively. Nationally, Korean Government has established "Enforcement of the Framework Act on Low carbon, Green Growth"(2010. 4. 13) to implement national mid-term GHG mitigation goal(30% reduction by 2020 compare to BAU), which established the foundation for phased GHG mitigation by setting up the sectoral and industrial goal, adopting GHG and Energy Target Management System. Also, follow-up measures are taken such as planning and control of mid-term and short-term mitigation target by detailed analysis of potential mitigation of sector and industry, building up the infrastructure for periodic and systematic analysis of target management. Likewise, it is required to establish more accurate, reliable and detailed sectoral GHG inventory for successfully establishment and implement the frame act. In comparison to the $CO_2$ emission, Especially fluorinated greenhouse gases (HFCs, PFCs, $SF_6$) are lacking research to build the greenhouse gas inventories to identify emissions sources and collection of the applicable collection activities data. In this study, with the refrigeration and air conditioning sector being used to fluorine refrigerant(HFCs) as the center, greenhouse gas emission estimation methodology for evaluating the feasibility of using this methodology look over and mobile air conditioning, fixed air conditioning, household refrigeration equipment, commercial refrigeration equipment for the greenhouse gas emissions were calculated. First look at in terms of methodology, refrigeration and air conditioning sector GHG emissions in developing country-specific emission factors and activity data of the industrial sector the construction of the DB is not enough, it's 2006 IPCC Guidelines Tier 2a (emission factor approach) rather than the Tier 2b (mass balance approach) deems appropriate, and each detail by process, sectoral activity data more accurate, if DB is built Tier 2a (emission factor approach) can be applied will also be judged. Refrigeration and air conditioning sector in 2009 due to the use of refrigerant greenhouse gas emissions ($CO_2eq.$) assessment results, portable air conditioner 1,974,646 ton to year, fixed-mount air conditioner 1,011,754 ton to year, household refrigeration unit 4,396 ton to year, commercial refrigeration equipment 1,263 ton to year was estimated to total 2,992,037 tons.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.169-177
• /
• 2024

In this paper, the effect on cement clinker and cement quality was studied to prove the effect of reducing the sintering temperature of cement clinker as a mineralizer to recycle fluorine based semiconductor sludge, an industrial by-product. In addition, a verification study was conducted to compare the properties of clinker and cement at different temperatures when natural fluorite, previously used as a mineralizer, was used. As a result of the study, semiconductor sludge showed sufficient effectiveness as a mineralizer and could replace natural fluorite, an existing mineralizer.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.555-566
• /
• 2008

Hydrogeochemical study in Samseung area (Boeun, Chungbuk) and waterrock interaction experiment using rock samples from the area were performed to elucidate the fluoride source in groundwater and explaining geochemical behavior of fluoride ion. Fluoride concentration of public water supply mostly using groundwater in Boeun area was significantly higher in South Korea. The maximum fluoride concentration of the study area was 3.9 mg/L, and 23% of samples exceeded the Korean Drinking Water Standard of fluoride (1.5 mg/L). The average concentration of fluoride was 1.0 mg/L and median was 0.5 mg/L. Because of high skewness (1.3), median value is more appropriate to represent fluoride level of this area. The relationships between fluoride ion and geochemical parameters ($Na^+$, $HCO_3$, pH, etc.) indicated that the degree of waterrock interaction was not significant. However, high fluoride samples were observed in $NaHCO_3$ type on Piper's diagram. The negative relationship between fluoride and $NO_3$ ion which might originate from surface contaminants was obvious. These results indicate that fluoride ion in groundwater is geogenic origin. The source of fluoride was proved by waterrock interaction batch test. Fluoride concentration increased up to 1.2 mg/L after 96 hours of reaction between water and biotite granite. However, the relationship between well depth and fluoride ion, and groundwater age and fluoride ion was not clear. This indicates that fluoride ion is not correlated with degree of waterrock interaction in this area but local heterogeneity of fluoriderich minerals in granite terrain. High fluoride concentration in Boeun area seems to be correlated with distribution of permeable structures in hard rocks such as lineaments and faults of this area. This entails that the deep bedrock groundwater discharges through the permeable structures and mixed with shallow groundwater.