• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.99-107
• /
• 2001

Germination of Codonopsis pilosula seeds and afterward their seedling emergence have been occasionally very poor due to their dormancy and structural defects. The study was done to determine the treatment effects of priming, $GA_3$, agitation and washing during and after priming, drying and water imbibition after drying on germination of its seeds and then of the successive three combined treatment after priming on the its seedling emergence to model its presown seed treatment. While agitation at the speed of 10 rpm was made or not, priming using $Ca(NO_3)_2$ and $GA_3$ under their different concentrations and light quality illuminated for 12 hours a day were done separately. Then their two best results were compared to determine the better one. Using the above determined best result, washing was done 3 minutes in the tap water or not, and drying of washed seeds was made under 4 different lights, and water imbibition of the dried seeds with differed period were successively done to deduce its presown seed treatment. In the comparison of the best germination rate of priming and $GA_3$, the former showed considerably higher rate than the latter; the priming treatment was done at agitated $Ca(NO_3)_2$ 150 mM solution under darkness or 12 hour red light illumination a day for 2 days. Washing after priming enhanced the rate compared to no-washing. Drying was the best way at which seeds washed were desiccated under $35^{\circ}C$ and 4 hour red light illumination. Water imbibition immediately before sowing must be made for 2 days. Seedling emergence rate was the highest at the seeds from successive 4 treatments, priming, washing, drying and water imbibition before sowing of two others, the priming and washing, or the priming, washing and water imbibition, meaning that its presown seed treatment must follow the procedure of the above 4 successive ones.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.27-44
• /
• 1986

The measured soil data are analyzed to the descriptive statistics and classified into the four models of uncorrelated-normal (UNNO), uncorrelated-nonnormal (VNNN), correlatedonnormal(CONN), and correlated-nonnormal(CONN) . This paper presents the comparisons of reliability index and check points using the advanced first-order second-moment method with respect to the four models as well as BASIC Program. A sin91e-mode Performance function is consisted of the basic design variables of bearing capacity and settlements on shallow foundations and input the above analyzed soil informations. The main conclusions obtained in this study are summarized as follows: 1. In the bearing capacity mode, cohesion and bearing-capacity factors by C-U test are accepted for normal and lognormal distribution, respectively, and negatively low correlated to each other. Since the reliability index of the CONN model is the lowest one of the four model, which could be recommended a reliability.based design, whereas the other model might overestimate the geotechnical conditions. 2. In the case of settlements mode, the virgin compression ratio and preccnsolidation pressure are fitted for normal and lognormal distribution, respectively. Constraining settlements to the lower ones computed by deterministic method, The CONN model is the lowest reliability of the four models.

• Journal of agriculture & life science
• /
• v.53 no.1
• /
• pp.13-21
• /
• 2019

This study was carried out to acquire basic data for a long-term hydroponic culture through investigating water and inorganic ion uptake characteristics at different EC level of nutrient solution of three tomato varieties. Three different tomato varieties, the European type(cv. Daphnis), the Asian type(cv. Super Doterang) and cherry type(cv. Minichal), were used for the investigation. Also, the deep flow technique(DFT) was applied. The three different electrical conductivity(EC) level(1.0, 2.0, 3.0, and 4.0 dS·m-1) of hydroponic nutrient solution were used as variable. At a high EC level of nutrient solution, the leaf area and fresh weight decreased in the early stage, and its growth(plant height, leaf number, leaf area, fresh-weight) was poor with salt stress. Result showed that the higher the EC level of the nutrient solution, the lesser was water uptake. The water uptake was not significantly different from varieties in the first survey, but In the second survey, the 'Daphnis' did not show a significant decrease in water uptake in the EC level higher than 2.0 dS·m-1., on the other hand, 'Super Doterang' presented very low water uptake. At a low EC level, N, P, and K, were absorbed more than the concentration of the irrigation water, while Ca, Mg, S uptake were low. At a high EC level, almost ions absorbed less than 50% of the initial concentration of irrigation water. Thus, imbalance among ions was severe at low EC level compared to high EC level. 'Daphnis' was a variety that effectively utilize nutrients under nutrient stress, showing high absorption at low concentration condition and low absorption at high concentration condition. However, 'Daphnis' suffered most seriously by absorbing nutrients excessively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.529-539
• /
• 2010

In order to evaluate the effect of soil salinity and culturing conditions including compost application and vinyl mulching on the maintenance of ridge and the growth of upland crops, three crops such as corn, soybean and sweet potato were experimented by using three or four cultivars of crops in the Saemangeum reclaimed tidal land. Average soil salinity before seeding was 2 dS $m^{-1}$, which was low enough for general upland crops to grow. However, high soil EC more than 16 dS $m^{-1}$ was observed in some parts of the experimented field. In the experiment, it was concluded that growth retardation and yield reduction of summer upland crops might be from severe erosion of ridge, soil compaction, flooding or wet soil condition and high salinity of some parts, and then these deteriorations were possibly improved for good crop growth and yield increase by compost application and vinyl mulching cultivation in the Saemangeum reclaimed tidal land.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.28-38
• /
• 2005

According to the recent development of measurement system utilizing one or a set of boreholes, visualization of the explored underground became to be a major issue. It induced even the introduction of monitoring apparatuses on the borehole wall with multi-function tool, but the usage of these was often limited by where is unfavorable rock condition and a few of engineers can approach. And so, a portable type of borehole camera with only the essential function has been investigated and a few of commercial models about this is recently being applied into the field condition. This paper was based on the monitoring results obtained using a commercial model by Dr. Nakagawa. Discontinuities in rock mass were the topic for the visualization, and it was studied how can visualize their three dimensional distribution and what a numerical formulation is needed and how to understand the visualization result. The numerical formulation was based on the geometric correlation between the dip direction / dip of discontinuous plane and the trend / plunge of borehole, a set of the equation of a plane was induced. As field application of this into two places, it is found that the above visualization methodology will be especially an useful geotechlical tool for analyzing the local distribution of discontinuities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.144-150
• /
• 2019

In this study, resistance spot welding was performed using a high tensile steel plate SGAFC 780. The shear tensile strength, fracture profile, nugget diameter, and simulation were compared according to the conditions. After the nugget diameter calibration, the minimum diameter of welding was more than 4.3mm when the welding current was 8kVA or more. At 9kVA and above 10kVA, the minimum nugget diameter of 4.3mm was satisfied. On the other hand, due to the high current and time, the fly phenomenon occurred and the deep indentation remained. An evaluation of the weldability confirmed that there was an interval that was evaluated as weld failure due to the creep phenomenon, which satisfied the tensile shear strength and minimum nugget diameter. On the other hand, areas that have sufficient load bearing capacity even when drift has occurred were also identified. The simulation results show that the error rate was less than 4.2% when comparing the nugget diameter in the simulation and the experimental results in the appropriate weld zone, and confirmed the reliability of the simulation.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.461-474
• /
• 2020

Korea launched Geostationary Environmental Monitoring Satellite (GEMS), a UV/visible spectrometer that measure pollution gases on 18 February 2020. Because satellite retrieval is an ill-posed inverse solving process, the validation with ground-based measurements or other satellite measurements is essential to obtain reliable products. For this purpose, satellite-based OMI and OMPS total column ozone (TCO), and ground-based Pandora TCO in Busan and Seoul were selected for future GEMS validation. First of all, the goal of this study is to validate the ground ozone data using characteristics that satellite data provide coherent ozone measurements on a global basis, although satellite data have a larger error than the ground-based measurements. In the cross validation between Pandora and OMI TCO, we have found abnormal deviation in ozone time series from Pandora #29 observed in Seoul. This shows that it is possible to perform inverse validation of ground data using satellite data. Then OMPS TCO was compared with verified Pandora TCO. Both data shows a correlation coefficient of 0.97, an RMSE of less than 2 DU and the OMPS-Pandora relative mean difference of >4%. The result also shows the OMPS-Pandora relative mean difference with SZA, TCO, cross-track position and season have insignificant dependence on those variables.In addition, we showed that appropriate thresholds depending on the spatial resolution of each satellite sensor are required to eliminate the impact of the cloud on Pandora TCO.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.133-144
• /
• 1982

The distribution of acid phosphatase activity was investigated with 141 microorganisms from the type culture collection of Chong Kun Dang laboratory and the 41 strains isolated from natural sources. The phytase activity was detected mainly with fungal strains. A fungus isolated from soil and identified as Aspergillus niger had shown the highest phytase activity. The environmental conditions for the enzyme formation by the isolate and some properties of the enzyme were also studied. The results obtained were as follows: (1) The highest phytase production was observed when the fungus was cultivated at 28$^{\circ}C$ for 5 days in the corn starch based medium using the cells incubated at 34$^{\circ}C$ for 3 days as a seed. (2) The optimal initial pH of the culture medium was found to around 2 for the formation of phytase. (3) Sucrose was proved to be one of the most effective carbon sources tested for the enzyme production. (4) As an inorganic nitrogen source, potassium nitrate was found to give a good result in the production of phytase. (5) Synthesis of phytase was significantly increased by the supplement with 0.2 % corn steep liquor to the basal medium as an organic nitrogen source. (6) At the concentration of 40-80 mg inorganic phosphate per liter of the culture medium, the enzyme formation revealed the highest level. But as the phosphate was increased above this optimum concentration the phytase activity was drastically decreased although the cell density showed to be still increasing

• Microbiology and Biotechnology Letters
• /
• v.8 no.2
• /
• pp.93-102
• /
• 1980

Fungi which were capable of producing gluconic acid were isolated from soil and tree leave samples, which had been collected in Seoul ana its vicinity. Among the 19 strains isolated, a strain named arbitrarily KUF-O4 was selected as a test strain chiefty because of its efficiency in gluconic acid production. The strain was identified as an Aspergillus sp. through its morphological properties. Optimum conditions for the gluconic acid production of KUF-O4 were investigated. The results obtained are as follows. 1. An incubation period of at least 30 hours was required for a good yield of gluconic acid. 2. A medium containing 10％ glucose needed at least 3 ％ CaCo$_3$to maintain the optimum pH for the production of gluconic acid during fermentation. 3. As a carbon source, glucose was the most effective one among the carbon sources tested. 4. As a nitrogen source, an ammonium salt was more effective than any other form of nitrogen compounds. 5. As mineral source, a small amount of both KH$_2$PO$_4$and MgSO$_4$was found to be necessary to increase the efficiency of the gluconic acid production.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.187-193
• /
• 1998

The effects of medium, incubation temperature, incubation period, pH of medium and $CO_2$ ondition during mycelial growth were investigated to study the factors associated with the formation of oidia in Flammulina velutipes. Oidia formation was increased when mycelial growth was poor, while oidia formation was inhibited in optimum condition of mycelial growth. Mating type of oidia was investigated to examine the effect of oidia formation on dikaryotic strain. Di-mon matings between oidia strains and original dikaryotic strain were carried out. Monokaryotic strains derived from oidia showed only one genotype. Seventy percent among Dimon mating strains showed slow mycelial growth and low yield of fruit-body, but others showed similar or high mycelial growth and yields in comparision with original dikaryon strain. One strain from di-mon mating demonstrated some differences in isozyme band pattern.