• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.55-59
• /
• 1989

Sodium methyl arsenate has been evaluated as a male sterilizing agent for the system of producing hybrid rice seeds. The compound was the most effective at the concentration of 0.02％. When applied as a foliar spray to four rice varieties at 15 days before heading, sodium methyl arsenate has produced 99％ male sterility. But the most effective time for application of the compound was 5 days before heading because of its phytotoxic effects. Effective application volume of the compound solution has depended on the growth of the plants treated. Varietal difference on the activity of the compound has been detected.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.5-14
• /
• 2007

In this study, Matsuda formula used to evaluate the loads acting on the pillar was investigated and load reduction factor(${\alpha}$) was evaluated by numerical analysis to better apply for the design. From the results, normal stress was concentrated to one side due to excavation of preceding tunnel after construction of pillar. And 86.5% of maximum normal stress was revealed partly unequally when the ground was poor. By numerical analysis, $14{\sim}83%$ of total loads calculated by Matsuda formula decreased and then, from these results, load reduction factor(${\alpha}$) was estimated. From now on, stability and economic aspects could be guaranteed by applying the load reduction factor(${\alpha}$).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.33-39
• /
• 2022

As 3D printer-related patents expire and major technologies are disclosed, the price of 3D printers is dropping, creating an environment where you can easily find the product you want. In particular, the cheapest FDM (Fused Deposition Modeling) 3D printer is being used in various fields. The FDM method can be manufactured without collapsing of the shape only by attaching a support under certain conditions when outputting the shape. When printing a shape without a support, the irregular surface that occurs at a certain angle is a defect in the product, but it is considered that it can be used as another fun factor in terms of arts and crafts. In this paper, to obtain such an irregular surface, factors that can affect the output were controlled and only the output angle was tested as a displacement factor. As a result of the experiment, it was possible to obtain an irregular surface without the filament flowing down when printing at an angle of 62° to 70° from the vertical. Also, artificially irregular surfaces were applied to craft products.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.300-300
• /
• 2020

최근 전체 산업재해율은 계속적으로 감소 추세를 보이는 반면, 건설업의 재해율은 증가하는 추세를 내타내고 있다. 이러한 건설업 공종별 재해유형은 임시구조물과 관련된 가설공, 굴착공, 철근콘크리트공의 재해율이 타 공종에 비해 높게 나타난다. 이는 공종 진행에 따라 변화되는 건설현장의 위험요소를 사전에 인지하여 제어·관리할 수 있는 사고예측 기술 및 대응 기술의 부재로 안전사고가 높게 발생한 것으로 판단된다. 이러한 상황 속에서 건설현장에서 빈번하게 발생하는 다양한 재해 상황에 대하여 공사별, 규모별, 공정별 대응 체계를 마련하고, 굴착공사 중 침수 발생 시 피해를 최소화할 수 있는 실용적인 긴급대응 방안을 확보함으로써 경제적인 손실뿐만 아니라 인명피해를 최소화하는 방안 마련이 필요하다. 공사 현장 재해 상황 중 침수는 태풍 또는 집중호우 시 공사구간이 침수되어 근로자 수몰 등의 피해가 발생하고, 절토면이 붕괴되는 등 2차적인 피해로 이어진다. 이러한 침수의 원인은 공사 현장의 저지대 위치, 집중호우 시 최대 강우량에 대한 대비 소홀, 양수기 부족 및 고장, 인접 배수로 배수기능 불량 등의 복합적인 원인들로 인하여 발생한다. 또한 굴착공사 현장의 침수는 공사기간 동안 개별 공종에 따라 침수발생 양상이 달라질 수 있다. 따라서 각 공종별 발생 가능한 침수 양상에 대한 예방/대응 기술이 필요하다. 본 연구에서 사용되는 HDM-2D 수리 동역학 모델은 2차원 흐름해석 프로그램으로 복잡한 하천지형이나 공사현장과 같은 불연속면에서 유속 및 수심 등을 계산한다. 또한 마름/젖음 현상 등 복잡한 수리현상에 대한 정교한 모의 기능 및 침수해석 등 어떠한 계산영역이나 흐름조건에서도 정확하고 안정적인 모의를 할 수 있다. 본 연구에서는 공사현장과 같은 불연속면에서 각 공종에 따라 발생할 수 있는 침수양상에 대한 모의를 진행하고 각 공종별 침수양상을 비교분석 하였다. 이를 통해서 굴착공사 현장 침수피해 예측 모델을 개발하여 개발된 기술을 사용하여 기후변화에 따른 강우량 증가와 이에 따른 수재해로 인한 건설현장 침수 발생 및 인명, 재산피해를 최소화하고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.97-105
• /
• 2009

This paper studied the cause of the deterioration of the four 3-Arch tunnels built in mid-1990. The common deteriorations of the four 3-Arch tunnels were longitudinal cracks, leakage and efflorescence at the same parts of lining concrete. Three fourths of 3-Arch tunnels, there was high percentage longitudinal cracks and a quarter was low frequency about longitudinal cracks. So the material reviewed to find out the differences between two groups in construction process and analysis was conducted such as non-destructive testing, precise visual survey and safety evaluation of one tunnel which had bad ground condition As the result, the tunnels were safety condition and the primary deterioration occurred during the construction process, namely, problems arrangement of rebar and the effects of the blast at middle tunnel.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.69-78
• /
• 2023

With the rapid growth of artificial intelligence, the demand for semiconductors is enormously increasing everywhere. To ensure the manufacturing quality and quantity simultaneously, the importance of automatic defect detection during the packaging process has been re-visited by adapting various deep learning-based methodologies into automatic packaging defect inspection. Deep learning (DL) models require a large amount of data for training, but due to the nature of the semiconductor industry where security is important, sharing and labeling of relevant data is challenging, making it difficult for model training. In this study, we propose a new framework for securing sufficient data for DL models with fewer computing resources through a divide-and-conquer approach. The proposed method divides high-resolution images into pre-defined sub-regions and assigns conditional labels to each region, then trains individual sub-regions and boundaries with boundary loss inducing the globally coherent and seamless images. Afterwards, full-size image is reconstructed by combining divided sub-regions. The experimental results show that the images obtained through this research have high efficiency, consistency, quality, and generality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.57-64
• /
• 2024

The introduction of Smart Factories has transformed manufacturing towards more objective and efficient line management. However, most companies are not effectively utilizing the vast amount of sensor data collected every second. This study aims to use this data to predict product quality and manage production processes efficiently. Due to security issues, specific sensor data could not be verified, so semiconductor process-related training data from the "SAMSUNG SDS Brightics AI" site was used. Data preprocessing, including removing missing values, outliers, scaling, and feature elimination, was crucial for optimal sensor data. Oversampling was used to balance the imbalanced training dataset. The SVM (rbf) model achieved high performance (Accuracy: 97.07%, GM: 96.61%), surpassing the MLP model implemented by "SAMSUNG SDS Brightics AI". This research can be applied to various topics, such as predicting component lifecycles and process conditions.

• Applied Biological Chemistry
• /
• v.18 no.3
• /
• pp.123-144
• /
• 1975

This study has been carried out to investigate the translocation-illuviation status of iron and manganese, which are striking phenomena in paddy soils, in relation to its morphological characteristics, and to find out a method to identify illuvial layer of iron quantitatively. Determination of active iron and easily reducible manganese content in surface soils of lowland paddy (266 samples) in Korea were conducted. The examination has been made on relationship between morphological, physico-chemical properties of the representative paddy soils (9 series) and iron and manganese content of their horizons. The results are summarized as follows. 1. The poorer the drainage, the higher concentration of active iron and easily reducible manganese were found, and under same drainage condition, the more the sand, the lower the content of them. 2. Irrespective of soil texture and drainage, highly signignificant positive correlation was found between the contents of active iron ($\hat{Y}$) and clay plus silt in surface soils. $$\hat{Y}=0.3929+(0.05352\;X\;clay%)+(0.0001023\;X\;silt%){\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;I$$ No correlation, however, was found between clay content and easily reducible manganese concentration. 3. Significant positive correlation was obtained between active iron ($\hat{Y}$) and total iron (x) content in each profiles of all soil series. Obtained regression equation is as follows; $$\hat{Y}=0.361x-0.480(r=0.651^{**}){\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;II$$ On the other hand, easily reducible manganese concentration had a tendency to increase, not significantly, with increasing total manganese concentration. 4. Accumulation of iron and manganese generally can be found in paddy soils, but distinct accumulation was found under moderately well drained fine loamy and clay soils, while surface accumulation occurred under poor drainage without regard to soil texture. 5. Profile description or determination of active iron in each horizon were found to be insufficient to designate illuvial layer of iron. Therefore, identification of illuvial layer of iron based on the ratio of total iron and active iron, and concentration of active iron estimated by the content of clay plus silt (Equation 1 above) was thought to be reasonable. Also, manganese accumulation layer would be estimated by total manganese and easily reducible manganese content and their ratio.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.1 s.52
• /
• pp.1-14
• /
• 1996

To evaluate the health risk of the workplace environment of a general hospital toward the hospital workers, a questionnaire survey on the perception of risk at the workplace environment and environmental measurements at 27 locations with 240 workers in the hospital were made from October 25th, 1993 to October 30th, 1994. The results were as follows ; 1. By the environmental measurements, 86 workers(36%) were found to be exposed to poor or harmful degree of general illumination, 193 workers(80%) were exposed to poor or harmful local illumination, 34 workers(14%) were exposed to poor or harmful degree of thermal condition and 180 workers(75%) were exposed to poor or harmful noise level, but nobody was exposed to poor or harmful dust and toluene concentration. Also nobody was exposed to poor or harmful level of radiation or anticancer/antibiotic agents. 2. The subjective perceptions on the environmental conditions felt by the workers were different from the objective findings by the environmental measurements. The workers underscored the poor illumination state and overscored the dust concentrations. Also workers oversensitized about the thermal condition, the noise level, the radiation level, the toluene concentration and anticancer/antibiotic agents 3. The sources of noise were the dialogue(179 workers) and the office instruments(131 workers). The sources of dust came from the clothes(108 workers) and the building materials(79 workers). 4. The questionnaire survey showed that the 28 workers were exposed to poor or harmful level of the antibiotics, 10 workers to alkali or acid and 6 workers to drug dust in the pharmacy but the above findings could not be proved by the environmental measurements.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.1
• /
• pp.31-37
• /
• 1986

In order to study the possibility of grassland improvement by spring sowing in the forest, microenvironmental conditions, emergence, percentage of grasses and weeds, root weight and dry matter yield of grasses were investigated. Two field sites (forest grassland and full-sunlight grassland) and two sowing times (March 20 and April 10) were assigned. The condition of the forest grassland was area of pine trees with 50% shading, and the experiment was performed at the Livestock Experiment Station in Suweon, 1984. The results obtained are summarized as follows: 1. For germination and early growth of grasses, full-sunlight grassland was more advantageous than forest grassland. Growth after that stage, on the other hand, forest grassland was more suitable. Especially, during dry and high temperature season, temperature of soil surface and underground in the forest grassland were decreased by $6-7^{\circ}C$ and $3-4^{\circ}C$ each other, compared with those of the full-sunlight grassland. Also soil moisture content was continuously higher in the forest grassland. 2. At March 20 sowing the emergence time in the full-sunlight grassland was shortened by 8 days, compared with that of the forest grassland. In case of sowing on April 10, however, there was no difference between two grassland sites. 3. Grasses grown in the forest was more prostrate and leaves from them decayed more, compared with those of the full-sunlight grassland. 4. The percentage of grasses in the forest grassland was 80 to 85 %, on the other hand, that of the full-sunlight grassland was only 15 to 20 %. And the percentage of grasses tended to be high in the plot of early sowing time. 5. Dry root weight and root length of grasses grown in the forest were inferior to those of the full-sunlight grassland (P<0.05), but there was no significant difference between two sowing times. 6. Dry matter yield of grasses was significantly higher (P<0.05) in the forest grassland than in the full-sunlight grassland, and yield was influenced by sowing time. Higher yield (4,011 kg/ha) was produced in the plot of the forest grassland with early spring sowing. 7. From above results, it is suggested that grassland improvement by spring sowing in the forest is possible, and it is desirable to sow in early spring.