• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.6-11
• /
• 1999

This experiment was carried out to estimate the appropriate seedling stand and to find out the factors of good establishment and the reason of the reduction of yield by water foxtail. The seedling stands was improved by the ice straw mulching and treading by the tracks of combine. The effect of mulching was higher than the treading. The appropriate seedling stands for example yield were estimated about 507 plants per $m^2$ and its yield was 24kg/10a. The higher density of water foxtail, the less the grain yield; 21.8% by 17 to 22 water foxtail stands per $m^2$ and 11.0% by 6 to 11 plants.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.29-40
• /
• 2004

The performance of the National Highway is raised, but the capacity of the signalized intersection on the National Highway is low. It's operated by TOD(Time Of Day) mode. To evaluate of the performance of COSMOS(Cycle, Offset, Split Model for Seoul), a real time traffic adaptive signal control system, on the National Highway, studied volume, travel time and queuing length at TOD control and TRC(Traffic responsive Control). Consequently, the average travel speed at TRC is high $2.9\~16.7$km/h then the average travel speed at TOD control. And te queuing length at TRC is low $15\~196m$ then the queuing length at TOD control.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.246-252
• /
• 2016

Double crown prostheses can be used in patients who have a few remaining teeth and poor periodontal condition because of secondary splinting of abutments, vertical loading, decrease of the length of lever arm due to fulcrum line located on margin of inner and outer crown. Successful results of treatments using double crown prostheses for the partially edentulous patients who have a few remaining teeth and implant overdenture using a small number of implants have been reported. In this case, there were a few remaining teeth with a very poor periodontal condition in maxilla, and there were a failed implant with severe alveolar bone resorption and shrinkage in the mandible. The main objective of this report is to introduce our case because a double crown partial denture showed satisfactory results in functional and esthetical aspects during more than one-year follow-up period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.709-714
• /
• 2014

Reverse-offset printing is one of the technologies that can be used for patterning fine features of the order of a few micrometers for printed electronics. In reverse-offset printing, a coated ink film is transferred to a blanket made of elastomer-like poly-dimethylsiloxane. Then, the blanket is impressed onto a clich$\acute{e}$ that has intaglio patterns. The blanket is deformed by penetrating the intaglio of the clich$\acute{e}$ according to the printing pressure. Excessive deformation of the blanket can cause printing defects upon touching the bottom of the intaglio pattern, especially in large patterns. In this paper, we modelled the deformation of the blanket using the finite element method. Considering the actual printing parameters, a condition for fabricating a clich$\acute{e}$ is proposed to prevent defects by the deformation of the blanket.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.419-426
• /
• 1985

Two cowpea varieties, VITA #5 &Jungweon local var., had been sown at intervals of 15 days from May 1 to Aug. 29, and the following results were obtained. The earlier the two varieties had been sown, the shorter period from planting to first blooming and maturing, the more peduncles, the more pods per peduncle and plant, the heavier 100-grain weight, and the more grain yield we had. VITA #5 was earlier in maturity and higher in yielding performance than Jungweon local var., and both could not bloom in late sowing after Aug. 14. During the period of flowering and seed-setting, bad weather condition decreased the number of grains per pod. Limit sowing date of VITA #5 was Jun. 30 and that of Jungweon local var. was Jun. 15 in the middle part of Korea. Growing degree days (GDD) was available in cowpea.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.169-179
• /
• 2000

The study was carried out to investigate the characteristics of vertical velocity distribution measured by current meter at Kangkyung station in Keum river during the period of 1995 to 1997. It suggests the quadratic parabola equation to estimate the vertical velocity profile only from the measurement data of surface velocity. The equation was found to be statistically very stable and showed high significance to express the surface velocity and bottom velocity. The vertical velocity profile was detennined by the relationships to the surface velocity, and a coefficient of the quadratic parabolic equation. The equation was verified to the reserved survey data, and the results were confirmed to be good for the estimation of the characteristics of the vertical velocity distribution. The vertical velocity profile can be applied to calculating the mean velocity and discharge, and to analyse the dispersion of pollutant materials in the streamflow.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.4
• /
• pp.61-68
• /
• 1990

This experimental study is aimed to investigate the coating method of scoria lightweight aggregate for reo duction of water absorption and the physical dynamic characteristics of coated-scoria jightweight aggregate con¬crete. The coating methods are as follows: I) Non-coating method. II) Coating method of only cement paste. rn) Coating mehtod of surface-coating agent after coating by cement paste. IV) Coating method of only surfaee-coating agent. V) Coating method of cement pasted after coating by surface-coating agent. The summerized conclusion are as fallows ; 1) Specific gravity and the rate of water absorption were lowest when aggregate was covered by only surface-coating agent, especially, rate of absorption was about 10% of non-coating aggregate. 2) Coated-aggregate were about 0.87~0.97t/m3 and lightweight concrete made of coated-aggre¬gates were 1.80~ 1.94 t/m3 in unit weight. 3) Compressive strength of the lightweight concrete made of cement pasted-coating aggregate was about 200~215kg/crrl. 4) The higher the rate of water absorption of coarse aggregate, the higher the rate of deterioration of compressive strength.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.321-329
• /
• 2003

The change of strain-dependent hydraulic conductivity around mined panels due to subsidence is examined where normal and shear strains, modulus reduction ratio and joint spacing are major factors controlling the changes of hydraulic conductivity. Modulus reduction ratio and joint spacing are defined through RMR and RQD, respectively. Utilizing these two empirical parameters, changes of hydraulic conductivity values of a full gamut of rock mass conditions are determined. The change of hydraulic conductivity is not apparent in the near surface area and more significant change takes place in the area around mined panels. A zone of strong influence from the subsidence extends to a height of approximately 20m above mined panels. The shear strain does also play the role of increasing a hydraulic conductivity around mined panels. As RMR of rock mass decreases, a hydraulic conductivity is found to be increased and this means that subsidence in a poor rock with low RMR has a great effect on a hydraulic conductivity field.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.107-113
• /
• 1976

This study is conducted to find out soil erodibility factor K value which is one of the most important factor to estimate soil loss using a new method for predicting K value, the nomograph, that was first proposed by Whischmeier. K values for 83 soil series including upland and forest soils in Korea were checked up. The result were as follows: The average K value was 0.27 with ranging between 0.05 and 0.51. K values were higher for finer textured soils than for coarser textured soils widely ranged in a textural class, and higher for silty textured and low permeable soils. K value was correlated inversely with organic matter content in range of 3 to 13 percent, but the tendency was not related in range of lower than 3 percent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.420-425
• /
• 1986

This study was conducted to investigate the influence of air temperature and relative humidity on excessive drying rate of burley tobacco. In experiment I, 4 temperatures and I humidity by day and air curing by night were treated from initial curing stage. In experiment II, 15 combinations of 3 temperatures and 5 humidities were applied from the yellow stage of cure. Yellowish cured leaves resulted from overdrying at high temperature and especially, at low humidity. How- ever, these were not produced at 75-80% RH and under 35$^{\circ}C$ by day with air curing b y night. The proper range of temperature and humidity for desirable color of cured leaf were the combinations of 30$^{\circ}C$, 75-80% RH or 35$^{\circ}C$, 80-85% RH. As excessive drying leaves increased, physical properties of cured leaves were poorer and chemical contents were less decomposed.