• Journal of Korea Water Resources Association
• /
• v.42 no.12
• /
• pp.1039-1052
• /
• 2009

Radar measurement with high temporal and spatial resolutions can be a valuable source of data, especially in the areas where rain gauge installment is not practical. However, this kind of data brings with it many errors. The objective of this paper is to propose a method to evaluate statistically the quantitative and qualitative accuracy at different radar ranges, temporal intervals and raingage densities and use a bias adjustment technique to improve the quality of radar rainfall for the purpose of hydrological application. The method is tested with the data of 2 storm events collected at Jindo (S band) and Kwanak (C band) radar stations. The obtained results show that the accuracy of radar rainfall estimation increases when time interval rises. Radar data at the shorter range seems to be more accurate than the further one, especially for C-band radar. Using the Monte Carlo simulation experiment, we find out that the sampling error of the bias between radar and gauge rainfall reduces nonlinearly with increasing raingage density. The accuracy can be improved considerably if the real-time bias adjustment is applied, making adjusted radar rainfall to be adequately good to apply for hydrological application.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.139-146
• /
• 2004

A 2D/3D complex optical system and its vision inspection algerian is proposed and implemented as a single probe system for high speed, precise vision inspection of the solder pastes. One pass un length labeling algorithm is proposed instead of the conventional two pass labeling algorithm for fast extraction of the 2D shape of the solder paste image from the recent line-scan camera as well as the conventional area-scan camera, and the optical probe path generation is also proposed for the efficient 2D/3D inspection. The Moire interferometry-based phase shift algerian and its optical system implementation is introduced, instead of the conventional laser slit-beam method, for the high precision 3D vision inspection. All of the time-critical algorithms are MMX SIMD parallel-coded for further speedup. The proposed system is implemented for simultaneous 2D/3D inspection of 10mm${\times}$10mm FOV with resolutions of 10 ${\mu}{\textrm}{m}$ for both x, y axis and 1 ${\mu}{\textrm}{m}$ for z axis. Experiments conducted on several nBs show that the 2D/3D inspection of an FOV, excluding an image capturing, results in high speed of about 0.011sec/0.01sec, respectively, after image capturing, with $\pm$1${\mu}{\textrm}{m}$ height accuracy.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.496-523
• /
• 2018

The objective of this study is to evaluate the economic feasibility of two fast pyrolysis and biooil upgrading (FPBU) plants including feed drying, fast pyrolysis by fluidized-bed, biooil recovery, hydro-processing for biooil upgrading, electricity generation, and wastewater treatment. The two FPBU plants are Case 1 of an FPBU plant with steam methane reforming (SMR) for $H_2$ generation (FPBU-HG, 20% yield), and Case 2 of an FPBU with external $H_2$ supply (FPBUEH, 25% yield). The process flow diagrams (PFDs) for the two plants were constructed, and the mass and energy balances were calculated, using a commercial process simulator (ASPEN Plus). A four-level economic potential approach (4-level EP) was used for techno-economic analysis (TEA) under the assumption of sawdust 100 t//d containing 40% water, 30% equity, capital expenditure equal to the equity, $H_2$ price of $1050/ton, and hydrocarbon yield from dried sawdust equal to 20 and 25 % for Case 1 and 2, respectively. TCI (total capital investment), TPC (total production cost), ASR (annual sales revenue), and MFSP (minimum fuel selling price) of Case 1 were $22.2 million, $3.98 million/yr, $4.64 million/yr, and $1.56/l, respectively. Those of Case 2 were $16.1 million, $5.20 million/yr, $5.55 million/yr, and $1.18/l, respectively. Both ROI (return on investment) and PBP (payback period) of Case 1(FPBU-HG) and Case 2(FPBU-EH) were the almost same. If the plant capacity increases into 1,500 t/d for Case 1 and Case 2, ROI would be improved into 15%/yr.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.183-187
• /
• 1997

The analytical conditions of 1,3-dichloro-2-propanol (DCP) and 3-chloro-1,2-propanediol (MCPD) by solid phase extraction were optimized to improve recovery. Selected-ion monitoring technique which was used for GC-MS analysis of both compounds gave substantially higher sensitivity. The detection limits of DCP and MCPD were 25 and 50 ppb, respectively. The effects of extraction column type, elution solvent and salt concentration on recovery were examined. A normal phase column was better than a reverse phase column in solid phase extraction of DCP and MCPD. It was explained in terms of polarity relationship of solvent-solute-solid phase. A maximum recovery was obtained at the salt concentration of 20% (w/v). Water-immiscible and chloropropanol-soluble solvents such as chloroform, diethyl ether, hexane and ethyl acetate were tested for elution solvent. Hexane and ethyl acetate were the most suitable solvents for the extraction of DCP and MCPD, respectively. High recovery better than 95% was obtained with the selected solvents.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.333-346
• /
• 2002

The continuous indentation techniques are one of the most effective methods to nondestructively estimate mechanical properties. There are many applications in various dimensions of materials from macro-scale, through micro-scale, even to nano-scale range. The macro-range technology of kgf-load level is now focused on the evaluation of tensile properties and residual stress of bulk materials, for example, used in conventional load-bearing structures and in-use pipelines. The technology and the apparatus were successfully developed by a domestic research group. The micro-range technology of gf-load level can be applied to investigate some property-gradient materials such as weldment. Because it has better spatial resolution than the macro-range technology. The nano-range technology (called nanoindentation technique) of mgf-load level is basically used to evaluate hardness and modulus of micro- and nano-materials. Moreover, many researches are going on to measure tensile properties and residual stress. The nanoindentation technology is easy to be applied to the various fields, such as semiconductor devices, multiphase materials, and biomaterials, though other methods are too difficult to be applied due to dimensional or environmental limitations. On the basis of these accomplishments, the international and the domestic standards are being established.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1269-1273
• /
• 2005

자연 친화적 하천관리는 현 치수위주의 하천정비 관행으로 인한 하천의 환경 기능의 훼손을 막고, 제도적으로 자연 친화적으로 하천 사업을 추진하기 위해서 수변조사, 계획, 설계, 시공, 모니터링, 그리고 유지관리 등 일련의 체계적인 절차에 따라 하천 사업을 시행하는 것이다. 특히 이러한 표준 절차 가운데 수변조사는 하천의 특성을 결정짓는 여러 가지 자연적, 인공적 형성과정들과 그 과정들을 지배하는 생태학적 원리들을 파악하여 하천사업의 정비주제와 방향을 설정하는데 도움을 준다. 모니터링은 계획과 설계, 시공을 통해 실시된 하천사업의 효과를 평가하고, 공법적용에 따른 하천의 변화과정을 파악하여 유지관리 및 적응관리를 위한 근거를 제시하는 과정이다. 수변조사 및 모니터링 매뉴얼은 건설교통부가 수행한 '자연친화적 하천정비기법 개발' 의 연구성과로서, 경기도의 탄천, 충청북도의 달천 그리고 경기도 오산천을 대상으로 각 관련분야의 전문가가 참여하여 직접 적용$\cdot$검증한 결과를 바탕으로 제작한 것이다. 이는 하천의 관리 및 하천관련 사업을 자연 친화적으로 수행하기 위하여 필요한 '수변조사'와 '모니터링'에 대한 일반적인 절차와 방법을 체계화 한 것이다. 특히 수변조사 매뉴얼의 경우는 $\ulcorner$하천설계기준$\lrcorner$의 '제12장 하천환경조사'를 보완하는 관계에 있다. 하천설계기준에서 제시한 하천환경조사는 본 수변조사 매뉴얼상과 동일한 절차와 양식을 따르고 있다. 하천설계기준에서 자세하게 기술하지 못한 조사방법, 정리, 분석, 평가에 대한 내용을 구체적으로 적용하여 이를 보완하고 있다.은 안양천 웹페이지(http://anyang.river.or.kr)에서 구현되고 있으며, 앞서 설명한 바와 같이 1단계 프론티어 사업으로 설치된 4개의 하천수위, 2개의 지하수위 관측시설과 함께, 2단계에 (주)웹솔루스에서 자체적으로 설치 운영하고 있는 2개소의 하수관거 모니터링 관측시설, 그리고 안양시에서 운영하고 있는 5개소의 강우관측소와 7개소의 수위관측소를 모두 통합하여 실시간 자료를 제공하고 있다. 수위자료는 10분단위의 텍스트정보와 그래프형태로 지원되며, 검색기간 설정을 통해 원하는 기간내의 자료를 선별, 검색할 수 있다.. 또한 이와 같은 기초적인 정보를 바탕으로 하류하천의 탁수 피해를 최소화할 수 있는 선택취수탑의 운영방안을 수립할 수 있다 본 연구에서는 이를 위해 선택취수탑 주위의 성층흐름을 기존의 실험자료와 수치해석을 통하여 분석하였고, 온도성층구조나 취수구의 위치변화에 따른 방류수 수질특성을 조사하였다.쇄파대(artifical reef)와 같은 완충지대를 갖는 호안을 축조함으로써 월파량을 감소시키는 대안으로 제시하고자 한다. 본 연구 수행을 통해 태풍 내습시 발생 가능한 자연재해에 대한 사전 방지를 목적으로 태풍피해의 원인을 제시하고 이를 해결하여 현재의 방재대책이 항구적인 방재대책으로 전환될 수 있는 방안 마련의 기초 자료로 활용되기를 기대한다., L-arabinose, 및 D-galactose; 제3차(第三次) 가수분해물(加水分解物)(C)에서 L-rhamnose, D-xylose, L-arabinose 및 D-galactose, 비가수분해물(非加水分解物)(C')에서 D-xylose와 D-galactose를 검출(檢出)하였다. (4) 구성당(構

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3541-3546
• /
• 2011

Autophagy is an evolutionarily conserved lysosomal pathway for degrading cytoplasmic proteins, macromolecules, and organelles in addition to recycling protein and ATP synthesis. Although autophagy is very important during embryogenesis, the mechanism underlying the dynamic development during this process remains largely unknown. In order to obtain insights into autophagy in early embryo development, we analyzed gene expression levels of autophagy-related genes (ATGs) in mouse embryos developing in vitro. Using real time RT-PCR technique, ATGs including Atg2a, Atg3, Atg4b, Atg5, Atg6, Atg7, Atg9a, and Wipi3, as maternal transcripts, were only up-regulated in 1-cell embryo stage before zygotic genomic activation (ZGA), and then expression decreased from 2-cell to blastocyst embryo stage. ATGs including Dram and Atg9b were expressed abundantly in 1-cell embryo state and in blastocyst embryo stage, athough Atg8 and Ulk1 were constantly expressed during preimplantation stage. However, Atg4d were only up-expressed from 4-cell to blastocyst stage. These results suggest that autophagy is related in mouse embryo, which possibly gives an important role for early development.

• Cartoon and Animation Studies
• /
• s.9
• /
• pp.112-126
• /
• 2005

This study investigates how 'multi-perspective' can be utilized in animation. For this goal, 1 used the traditional techniques of Korean folk paintings called 'Minhwa.' Most 'Minhwa' works, employ 'multi-perspectives', instead of linear perspective of the Western tradition that has been only taught to students under the formal education system. In Minhwa parts of reality are not only stylized but also fragmented and combined within the same frame. Other common techniques of 'Minhwa' include frontal view, bird's eye view, and inverse-perspective, which are of ien combined in one single work. The purpose of this study is to develop a working principle and practically apply it to , an animation piece based on the Korean folktale of the same title. In doing so, I have proposed a way to reconstruct and revitalize the traditional art form in the age of digital technology and have concluded that 'Multi-perspective' in 'Minhwa' can be utilized in other contents such as animation.'Multi-perspective' in 'Minhwa' is a rich source that has numerous cultural applications.

• Microbiology and Biotechnology Letters
• /
• v.34 no.2
• /
• pp.83-93
• /
• 2006

In heavily industrialized areas, soil sites are contaminated with high concentrations of heavy metals. These pollutants are highly accumulated to the human body through the food web and cause serious diseases. To remove heavy metals from the soil, a potential strategy is the environmental friendly and cost effective phytoremediation. For the enhancement of remediation efficiency, the symbiotic interaction between the plant and plant growth-promoting rhizobacteria (PGPR) has been attended. In this review, the interaction of the plant and PGPR in the heavy metal-contaminated soil has been reviewed. The physicochemical and biological characteristics of the rhlzosphere can influence directly or indirectly on the biomass, activity and population structure of the rhizobacteria. The root exudates are offered to the soil microbes as useful carbon sources and growth factors, so the growth and metabolism of rhizobacteria can be promoted. PGPR have many roles to lower the level of growth-inhibiting stress ethylene within the plant, and also to provide iron and phosphorus from the soil to plant, and to produce phytohormone such as indole acetic acid. The plant with PGPR can grow better in the heavy metal contaminated soil. Therefore higher efficiency of the phytoremediation will be expected by the application of the PGPR.