• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.15
• /
• pp.69-75
• /
• 1974

This experiment was conducted to investigate the influence of different amount of nitrogen and deficiency of soil moisture on yield components of soybean. Soybean were seeded on 1/2000a wagner pot. Deficiency of soil moisture was treated at each growth atage of soybean. 1.In case of deficiencyt of soil moisture at the flowering time in the plot of non-nitrogen(NO D3), the growth duration of soybean was shortened about three to four days. 2. The leaf area was greatly affected by the influence of both treatments till 49days after germinating. 3.The increase of stem height, stem doameter,number of branches and lengeh of the branches came to an end about 70 days after seeding. These growing condition of tje soybean were lowest the plot of No D$_1$,in which the frowth of the soybeans were poor at the early stage. 4.The number of pods was not increased by the increase of fertilizing nitrogenous fertilizer. The number of pods was much decreased by the influence of soil mousture deiciency, and under this condition, the proportion of main stem pods and two or three grain pods was high. 5.The 3rd and 4h nodes and the 10th to 12th nodes from bottom had more pods than the other nodes had, but of the plants had grown well, they had more pods on the 3rd and 4th nodes, but if the plants had grown poorly, they had more pods on the 10th to 12th nodes. 6.The content of protein in the soybean was low at the plit of N。D$_4$which had not heavy weight of 100 grains, and the content of oil in the soybean was low in the plot in which each plant had a small number of grains.

• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.149-161
• /
• 2008

It is nearly impossible to estimate the exact state of the current rock stress of interest site by the theoretical and physical approaches except some specific geological situations. This means that in-situ stress measurement is a unique way to obtain reliable information on rock stress especially for civil and mining engineering related problems. Since late in the 90's, in-situ rock stress tests have been widely conducted to provide the quantitative information on the stress state of engineering site at the design stage of an underground rock structure in the Kyungsang Basin, Korea. The study area is the near surface regions at the depth less than 300 m in the Kyungsang Basin. It includes Yeosoo to the west and Busan to the east. Totally, 270 in-situ stress measurements were conducted in the surface test boreholes at the depth from 14 m to 300 m by hydraulic fracturing method. In this paper, based on the measurement data set, the overall characteristics of the current in-situ rock stress fields in the study area are briefly described. And also the investigation results on the difference between the stress distributions for the granitoid and the andesitic rock region are also introduced. Finally, the distributions of the regional horizontal stress directions in Busan and the Yangsan faults area are shown.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.10-17
• /
• 1999

This paper investigates the linear stability of both uniform and non-uniform density plane mixing layers with special emphasis on the effect of the wake component in the velocity profile. Velocity and density profiles for laminar flows are obtained from analytic profiles. Mixing layers with wakes have two generalized inflection points and two unstable modes-sinuous and varicose modes. For uniform density mixing layers, sinuous modes are more unstable than varicose modes, which shows wakes will be destabilized by sinuous modes. For non-uniform density mixing layers with high density in high speed flows, sinuous modes are more unstable than varicose modes. For non-uniform density mixing layers with high density in low speed flows, varicose modes can be more unstable than sinuous modes.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.35-40
• /
• 1977

The seed yield was the highest at the sowing of the 20th of September at Mokpo, and of the 30th .of September at Chungnam. And the correlation, also, was positively relative between them rape such as the 1st number of total branches and of podes per ear, the seed content .and seed yield. In accordance with the test it seemed that the suitable period of the Autumn sowing and Spring transplanting of rape was the 20th of September in Mokpo, and the 30th of September in Chungnam.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.191-197
• /
• 1984

This study was conducted to investigate the flowering habit for the botanical types of peanut (Arachis hypogaea. L) in cultural limiting region. Eight peanut varieties pertaining to virginia, Spanish, Valencia, Shinpung type were used in this study. Shinpung type, a new erect type was developed at Crop Experiment Station, ORD. Appearance of the first flower of peanut plants is observed at a relatively early growing stage. Number of days to first flower were 41 days under vinyl-mulching while non-mulching culture took 55 days. Number of days to first flower were delayed in order of Valencia, Spanish, Shinpung, Virginia type. Flowering durations were distinguished among botanical types and days of those were Virginia 85-93, Spanish 101-105, Valencia 106-113, Shinpung 82-88 days, respectively. The Spanish and Valencia types produced more flowers than Virginia and Shinpung types. The maximum flowering stage of Shinpung and Virginia types reached early and ceased by one cycle, while Spanish and Valencia types came late and showed maximum stage through the early and late stage during the growth stage. By vinyl-mulching, the maximum flowering stage was shortened by 20 days than that of non-mulching. Distribution of flowers for each of branch positions to total flowers occupied 52-53% in two cotyledonary branchs, 23-27% in 3rd to 5th branchs, 20-25% in over. 6th branchs. Shinpung type was considered more favorable botanical type than the other types for the breeding of early maturing high yielding variety because of shortening of days to first flower, flowering duration and distribution of lower branch of effective flowers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.436-441
• /
• 1985

The study was conducted to provide basic information to breeders and agronomists working with sesame. The grain weight and germinability were investigated for eight plant types classified by branching habit, capsules per axil, and carpels and loculi of a capsule. Two typical cultivars were chosen for each plant type among 527 gene pools. Dry weight of one thousand grains was increased rapidly from 25th to 35th day after flowering, and reached peak on 40th day after flowering in upper part capsules and 45th day after flowering in lower and middle part capsules, so that this period was considered to be of physiological maturity in each capsule bearing part. Side capsules on main stem and branch capsules were lighter than central ones of main stem, and upper capsules of four carpels eight loculi type decreased more seriously. BTB type demonstrated relatively better growth compared to the growth of BTQ type in one thousand grain weight. The maximum grain filling duration for germination percentage increased rapidly up to 40th day after flowering. Above 70% germinability was obtained from 40th day after flowering. Harvesting time of physiological maturity was considered to be 45th day after flowering with peaks of 2.14g of one thousand grain weight, 26% of grain water content and 90% of germinability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.233-239
• /
• 1983

In order to obtain basic date for the cultivation and the breeding of double zero varieties of rapeseed, spring nature grade were investigated. Spring nature grade could be classified to 8 classes by the method of material maturity. The double zero varieties, Ⅶ group of spring adaptability has been developed from the cross "Oro" and "Midas" classified as summer type. A significant negative correlation was found between the spring adaptability and seed yield. On the other hand, a highly significant negative correlation was found between maturation and spring adaptability, cold resistnce and spring adaptability, plant from and spring adaptability. Ⅵ and Ⅶ group close to summer type showed spring growing adaptability, and 0, I and II group were appeared as winter type, autumn growing adaptability with cold tolerance.with cold tolerance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.208-225
• /
• 2019

To understand the mean surface circulation and surface currents in the East Sea, trajectories of surface drifters passed through the East Sea from 1991 to 2017 were analyzed. By analyzing the surface drifter trajectory data, the main paths of surface ocean currents were grouped and the variation in each main current path was investigated. The East Korea Warm Current (EKWC) heading northward separates from the coast at $36{\sim}38^{\circ}N$ and flows to the northeast until $131^{\circ}E$. In the middle (from $131^{\circ}E$ to $137^{\circ}E$) of the East Sea, the average latitude of the currents flowing eastward ranges from 36 to $40^{\circ}N$ and the currents meander with large amplitude. When the average latitude of the surface drifter paths was in the north (south) of $37.5^{\circ}N$, the meandering amplitude was about 50 (100) km. The most frequent route of surface drifters in the middle of the East Sea was the path along $37.5-38.5^{\circ}N$. The surface drifters, which were deployed off the coast of Vladivostok in the north of the East Sea, moved to the southwest along the coast and were separated from the coast to flow southeastward along the cyclonic circulation around the Japan Basin. And, then, the drifters moved to the east along $39-40^{\circ}N$. The mean surface current vector and mean speed were calculated in each lattice with $0.25^{\circ}$ grid spacing using the velocity data of surface drifters which passed through each lattice. The current variance ellipses were calculated with $0.5^{\circ}$ grid spacing. Because the path of the EKWC changes every year in the western part of the Ulleung Basin and the current paths in the Yamato Basin keep changing with many eddies, the current variance ellipses are relatively large in these region. We present a schematic map of the East Sea surface current based on the surface drifter data. The significance of this study is that the surface ocean circulation of the East Sea, which has been mainly studied by numerical model simulations and the sea surface height data obtained from satellite altimeters, was analyzed based on in-situ Lagrangian observational current data.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.145-151
• /
• 1984

Takayasu's arteritis is an arteritis of undetermined etiology, which affects the aorta, proximal portion of its major branches, and causes narrowing, occlusion, or aneurysmal dilatation of vessel. Authors report 2 cases of Takayasa's arteritis with brief review of the literature.