• Journal of the Korean Magnetics Society
• /
• 제17권2호
• /
• pp.81-85
• /
• 2007

MnTe layers of high crystalline quality were successfully grown on Si(100) : B and Si(111) substrates by molecular beam epitaxy (MBE). Under tellurium-rich condition and the substrate temperature around $400^{\circ}C$, a layer thickness of $700{\AA}$ could be easily obtained with the growth rate of $1.1 {\AA}/s$. We investigated the structural, magnetic and transport properties of MnTe layers by using x-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometry, and physical properties measurement system (PPMS). Characterization of MnTe layers on Si(100) : B and Si(111) substrates by XRD revealed a hexagonal structure of polycrystals with lattice parameters, ${\alpha}=4.143{\pm}0.001{\AA}\;and\;c=6.707{\pm}0.001{\AA}$. Investigation of magnetic and transport properties of MnTe films showed anomalies unlike antiferromagnetic powder MnTe. The temperature dependence of the magnetization data taken in zero-field-tooling (ZFC) and field-cooling (FC) conditions indicates three magnetic transitions at around 21, 49, and 210 K as well as the great irreversibility between ZFC and FC magnetization in the films. These anomalies are attributable to a magnetic-elastic coupling in the films. Magnetization measurements indicate ferromagnetic behaviour with hysteresis loops at 5 and 300 K for MnTe polycrystalline film. The coercivity ($H_c$) values at 5 and 300 K are 55 and 44 Oe, respectively. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviours and showed conduction via Mott variable range hopping at low temperatures.

• Korean Journal of Materials Research
• /
• 제9권9호
• /
• pp.878-882
• /
• 1999

Structural properties of $Al_xGa_1-_xN$ epilayers grown on (0001) sapphire substrate by plasma induced molecular beam epitaxy are investigated in the range of AlN molar fraction from 0.16 to 0.76. The AlN molar fraction estimated by X-ray diffraction agrees well with that of Rutherford backscattering spectroscopy, showing a good linear relationship. The uniform Auger electron microscopy depth profile and linear dependence of average atomic concentration of all the constituents of AlGaN epilayers on AlN molar fraction imply that the epitaxial growth of $Al_xGa_1-_xN$ layers with variation of AlN molar fraction is well controlled without the compositional fluctuation in depth of the epilayer. It is observed by atomic force microscopy that the surface grain shape of $Al_xGa_1-_xN$ epilayer changes from roundish to coalesced one with increasing AlN molar fraction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.227-227
• /
• 2013

본 연구에서는 Si(111) 기판에 성장온도 및 InN 증착양 변화에 따른 InN 양자점(Quantum Dot) 핵성생(Nucleation) 특성에 대해 논의한다. InN 양자점은 Nitrogen-Plasma 소스를 장착한 분자선증착기(MBE)를 이용하여 $0.103{\AA}/s$의 성장속도로 성장하였다. 성장온도를 $700^{\circ}C$에서 $300^{\circ}C$로 변환하면서 형성한 시료에서 lnN 양자점의 공간밀도는 $9.4{\times}10^7/cm^2$부터 $1.1{\times}10^{11}/cm^2$를 나타냈다. 가장 높은 공간밀도인 $1.1{\times}10^{11}/cm^2$는 기존에 보고된 값 ($7.7{\times}10^{10}/cm^2$)보다 상대적으로 높은 값을 갖는다 [1,2]. InN 증착양을 93, 186, 및 $372{\AA}/s$으로 각각 변화시켜 형성하여 양자점의 초기 성장거동을 분석하였다. InN 증착양이 증가함에 따라 양자점의 공간밀도는 $4.4{\times}10^{10}/cm^2$에 $6.4{\times}10^{10}/cm^2$까지 증가하였다. 일반적으로 InP 및 GaAs 기판을 기반으로 한 In(Ga)As 양자점은 증착양이 증가함에 따라 밀도는 감소하고 크기는 증가하는 경향을 보이며, 이는 같은 상 (Phase)을 갖는 물질들끼리 결합하려는 경향이 있기 때문이다. 본 실험에서는 기존 결과와 다른 경향을 보이고 있는데, 이는 Si(111) 기판과 InN 사이의 격자부정합이 상대적으로 크기 때문에 InN 양자구조가 커지는 대신 추가로 새로운 핵생성 메커니즘에 의한 것으로 설명할 수 있다. 이러한 InN 증착양에 따른 InN 양자점 성장거동을 표면에너지를 포함한 이론적인 모델을 통해 논의하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.161-161
• /
• 2010

n-type 반도체 특성을 띄는 $SnO_2$ 나노선은 가스 센서, 투명 소자, 태양광 전지 등으로 널리 사용되고 있다. 본 연구에서는 화학기상증착법으로 성장한 $SnO_2$ 나노선으로 폴리이미드 (PMDA-ODA: PI) 박막을 게이트 절연막으로 이용한 전계효과트랜지스터를 플렉서블 기판에 제작하고 전기적 특성을 분석하였다. 전자 전달 특성 곡선으로부터 n-형의 반도체 특성을 확인하였으며, 대부분의 산화금속 나노선에서와 같이 매우 큰 전기적 히스테리시스가 관찰되었다. 산화금속계통 나노선 소자의 히스테리시스는 나노선 표면에 산소 및 물 분자가 흡착되어 생기는 전자 갇힘 현상이 가장 큰 원인으로 알려져 있는데, 이러한 히스테리시스를 조절하거나 없애는 것은 소자의 특성 향상에 있어 매우 중요하다. 한편 PI 절연막에는 느린 분극 현상을 만드는 OH 반응기가 존재하기 때문에 나노선과는 반대 방향의 히스테리시스를 보일 것으로 예상된다. 본 연구에서는 제작된 $SnO_2$ 나노선 FET에서 PI 게이트 절연막의 경화 정도에 따른 히스테리시스를 조사하였다. FT-IR 측정에 따르면, PI 필름에 존재하는 OH 반응기는 PI를 경화시킴에 따라 감소하였으며 전기적인 히스테리시스도 감소하였다. 따라서, 절연막을 경화시키지 않았을 때는 PI 내부에 다량의 OH 반응기가 존재하여, PI의 히스테리시스가 나노선 히스테리시스보다 더 크게 작용하여, 전체적으로는 PI의 특성인 반시계 (counterclockwise) 방향의 히스테리시스를 나타내었다. 한편, 절연막을 완전히 경화시키면, OH 반응기는 대부분 사라지고 나노선의 히스테리시스만 발현되어 소자는 시계방향의 히스테리시스를 보였다. 이러한 실험결과를 통해, PI 박막을 $250^{\circ}C$ 에서 약 7분간 경화시켰을 때 나노선과 절연막의 히스테리시스가 가장 이상적으로 상쇄되어 전체적으로 히스테리시스가 매우 작아진 것을 관찰할 수 있었다. 이는 향후 나노선 FET의 안정적인 응용에 매우 유용한 결과로 활용될 것으로 예측된다.

• Journal of the Korean Vacuum Society
• /
• 제15권3호
• /
• pp.294-300
• /
• 2006

We fabricated the distributed feedback (DFB) InP/InGaAs/InP grating structures on InP (100) substrates by metal-organic chemical vapor deposition, and their structural properties were investigated by atomic force microscopy and scanning electron microscopy. Self-assembled InAs/InAlGaAs quantum dots (QDs) were grown on the InP/InGaAs/InP grating structures by molecular beam epitaxy, and their optical properties were compared with InAs/InAlGaAs QDs without grating structure. The duty of the grating structures was about 30%. The PL peak position of InAs/InAlGaAs QDs grown on the grating structure was 1605 nm, which was red-shifted by 18 nm from that of the InAs/InAlGaAs QDs without grating structure. This indicates that the formation of InAs/InAlGaAs QDs was affected by the existence of the DFB grating structures.

• Journal of the Korean Vacuum Society
• /
• 제6권2호
• /
• pp.114-121
• /
• 1997

The transparent conductiong thin films of tin oxides were prepared on pyrex glass substrates by the pulse laser deposition. In the atmospheres of vacuum, O2, and $Sn(CH_3)_4$ a polycrystalline $SnO_2$ target was ablated by Nd-YAG laser beam to deposit thin films on the substrates at room temperature, and as-deposited films were subsequently heat-treated in the air for 2 h at 230, 420 and $610^{\circ}C$, respectively. The characteristics of the thin films were examined by UV-VIS-NIR spectrometry and X-ray diffractometry, and the electrical properties were measured by four-point probe method along with film thickness monitored by the stylus method. It was observed that in the presence of $Sn(CH_3)_4$, $SnO_2$ phases were grown even at room temperature. This suggests that the microplasma producted during the laser ablation plays an important role in the dissociaation of precursor molecules.

• Journal of the Korean Vacuum Society
• /
• 제15권2호
• /
• pp.194-200
• /
• 2006

Self-assembled InAs/InAl(Ga)As quantum dots (QDs) were grown on InP substrates by a molecular-beam epiaxy, and their structural and optical properties were investigated by atomic force microscopy (AFM), transmission electron microscopy (TEM), and room-temperature photoluminescence (PL). AFM images indicated that the InAs quantum structures showed various shapes such as quantum dashes, asymmetric and symmetric QDs mainly caused by the initial surface conditions of InAl(Ga)As with the intrinsic phase separation. For the buried InAs QDs in an InAlGaAs matrix, the average lateral size and height of QDs were 23 and 2 nm, respectively. By changing the growth conditions for the QD samples, the emission wavelength of $1.55{\mu}m$ was obtained, which is one of the wavelength windows for fiber optic communications.

• The Journal of the Acoustical Society of Korea
• /
• 제23권1호
• /
• pp.1-7
• /
• 2004

We developed SH-SAW sensors to detect protein molecules in liquid solutions applying a particular antibody thin film on the delay line of transverse SAW devices. The antibody investigated was human-immune-globulin G (HigG) to hold the antigens (anti-HigG) in the protein solution. We fabricated the sensor generating 100 MHz with the piezoelectric single crystal LiTaO₃. We measured the frequency change of the sensor by adding the anti-body concentration on SAM (self assembled monolayer) deposited on the Au layer. The sensor showed stable response to the mass loading effects of the anti-HigG molecules with the sensitivity up to 10.8 ng/ml/Hz at noise level 400 Hz below.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.156-156
• /
• 2011

InAs와 InGaAs 양자점(Quantum Dot: QD)을 이용한 광대역 초발광 다이오드(Superluminescent Diode: SLD) 시료가 분자선증착법(Molecular Beam Epitaxy)을 이용하여 성장되었다. 광대역 파장대 출력을 얻기 위해 각기 다른 종류의 양자점과 다른 크기의 양자점을 적층하였다. 시료는 광발광(Photoluminescence: PL) 측정과 전계발광(Electroluminescence: EL) 측정을 통해 분석 되었으며, PL 측정결과 1222 nm와 1321 nm 파장에서 최대치(peak)를 나타냈으며 EL 측정결과 900mA 전류 주입시 131 nm의 반치폭(Full Width at Half Maximum: FWHM)을 얻었다.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.80-83
• /
• 2000

In this work we deposited Pentacene thin film by OMBD at the various substrate temperatures, deposition rate and the various annealing temperatures for the fabrication of organic TFT and investigated the electrical and film surface characteristics such as sheet resistance, contact resistance and conductance Film thickness were measured by $\alpha$-step and the sheet resistance, contact resistance and conductance were extracted from the relation between the distance of the contacts and the resistance. During the film deposition the substrate temperature was held at 3$0^{\circ}C$, 4$0^{\circ}C$, 5$0^{\circ}C$, 6$0^{\circ}C$, 8$0^{\circ}C$ and 10$0^{\circ}C$, respectively. After the film deposition, Au contact was deposited by thermal evaporation. For the effect of annealing, the thin film was annealed in the nitrogen environment at 10$0^{\circ}C$ and 14$0^{\circ}C$ for 10 seconds, respectively. Film surface characteristics at the vatious substrate temperatures were measured by AFM. The crystallization of thin film was improved as the substrate temperatures were increased and the maximum gram size was 4${\mu}{\textrm}{m}$. The conductivity of thin film was found to be 7.40 $\times$10$^{-7}$ ~ 7.78$\times$10$^{-6}$ S/cm and the minimum contact resistance was 2.5324 ㏁.