• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.116-121
• /
• 2007

TiNi shape memory alloy(SMA) was fabricated by PLD(plused laser deposition) using equiatomic TiNi target. Composition and crystallization of TiNi thin films which were fabricated in ambient Ar gas(200m Torr)and vacuum($5{\times}10^{-6}\;Torr$) were investigated. Composition of TiNi thin films was characterized by energy-dispersive X-ray spectrometry (EDXS) and crystallization was confirmed by X-ray diffraction (XRD). The composition of films depends on the distance between target and substrate but does not sensitively depend on the substrate temperature. It is found that the composition of films can be easily controlled when substrate is placed inside plume in ambient Ar gas. It is also found that the in situ crystallization temperature ($ca.\;400^{\circ}C$) in ambient Ar gas is lowered in comparison with that of TiNi film prepared under vacuum. The low crystallization temperature in ambient Ar gas makes it possible to prepare the crystalline TiNi thin film without contamination.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.253-258
• /
• 1999

최근 가스 소비량이 급증하면서 가스 관련 사고 또한 증가하고 있는 추세에 있다. 가스관련 사고에 대한 분석결과 조정기의 제품불량으로 인한 사고 발생율이 급격하게 증가하고 있으며, 다수의 사고가 발생하는 것으로 나타났다. 본 연구에서는 LPG용 조정기의 불량에 의한 가스사고를 예방하고 사용상의 문제점을 개선하기 위해서 현재 유통되고 있는 사용중인 LPG용 조정기의 폭발위험성과 충격안전성을 고찰하여 폭발, 화재 방지 대책을 수립하고 시중에서 사용중인 조정기의 안전성을 검증하였다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.131-132
• /
• 2011

저압가스질화법을 이용하여 SCM440강을 신속질화처리 하였다. 기존의 가스질화법과는 달리 낮은 암모니아가스 농도의 분위기와 아산화질소를 사용한 산화반응의 영향으로 5시간의 짧은 질화처리로서 0.6mm 이상의 질화깊이를 확보할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.66-66
• /
• 1997

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.7-7
• /
• 1999

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.3
• /
• pp.42-45
• /
• 1989

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.17-21
• /
• 1999

석탄가스화기는 IGCC의 핵심으로서 석탄을 고온에서 열분해 연소 및 가스화하여 연료가스인 저/중열량 가스(CO,H$_2$)로 전환하는 장치이며, Texaco,Destec 및 Shell 등 분류층 가스화기가 발전용으로서 개발중에 있다. 전력연구원에서는 가압분류층 가스화기(Pressured Drop Tube Furnance)를 이용하여 석탄의 가스화 특성을 연구하고 있다. 석탄가스화 공정은 탄종과 운전조건에 따라 그 반응 특성의 편차가 매우 심하고 가스화 특성 실험시 탄종이 자국위주로 되어 있어 우리나라에 많이 수입되는 석탄에 대한 가스화특성에 대한 정보가 많지 않다. 따라서 본 연구는 상용가스화기의 운전조건을 모사한 분위기하에서 석탄가스화 특성을 결정하는 것이 목적이며, Adaro탄을 대상으로 15기압 가압하에서 반응온도 140$0^{\circ}C$, 산소/석탄비 0~l.5, 석탄입자 45~63$mu extrm{m}$, 그리고 석탄 공급율은 6g/min으로 실험조건을 주어 산소/석탄비 변화시 탄소전환율 및 냉가스효율에 대한 석탄가스화 반응 특성을 평가하였다.(중략)

• Resources Recycling
• /
• v.27 no.5
• /
• pp.54-60
• /
• 2018

The quality of steel produced from scrap can be adversely affected because of the buildup of tramp elements in recycled scrap. The tramp element of greatest concern is copper because of its effect on steel quality, even in small percentage quantities. In this study, possibility of removal of copper from ferrous scrap by using $Cl_2$ gas is experimentally examined in a small size experimental apparatus. Synthetic ferrous scraps containing copper were reacted with $Cl_2$ gas in various atmosphere. The copper was chloridized and evaporated, whereas iron was oxidized and was not reacted with Cl2 and oxygen mixture gas.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.108-113
• /
• 1993

In this paper, we study the photorefractive properties of Fe indiffused $LiNbO_3$ waveguides. Comparing the photorefractive properties of $Fe:LiNbO_3$ with those of $LiNbO_3$, we confirm the increase of the diffraction efficiency and the sensitivity by Fe doping. Also for the photorefractive properties of $Fe:LiNbO_3$ waveguides with different ambient gases, the diffaction efficiency and the sensitivity of $Fe:LiNbO_3$ indifused in pure argon gases are the highest and its decay time is the shortest. Therefore, it is recommended that pure argon gases be used in Fe indiffusion process for good optical switches with photorefractive effect.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.81-87
• /
• 1999

Poly-acrylonitrile (PAN) based carbon fibers were stabilized under various tensions in the presence of air at about $200^{\circ}C$ and sequentially carbonized under some different gas environments in the range of 700 to $1500^{\circ}C$. The prepared carbon fibers were used for rechargeable lithium ion battery anode to investigate preparation parameters effects on electrochemical characteristics. It was found that the tension during stabilization, carbonization temperature and gas atmospheres affect the carbon fiber properties such as conductivity, mechanical strength, surface morphology and diffusion coefficient of lithium ion, which are closely related to the on electrolchemical properties as well as the charge/discharge characteristics.