• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.269-277
• /
• 2019

In this paper, the compatibility analysis on the track record operation center for the regional industry upbringing is presented. The renewable energy sources such as solar, wind and battery energy storage system have been widely spread in these days. Also the requirements on the efficiency, reliability and power demands of these distributed systems are increasing and they can be demands on the construction of the data track record center for renewable energy industries in order to promote the local industries. The analysis on the size of the de-centralized power system are performed based on the technical issues. The necessities, requirements and center goals to meet these missions are presented in the following session. The proposal of the 1 MW operation center construction and operations are presented in the result of the compatibility analysis. And the lists of the required equipments in the operation facilities are suggested to have proper operational capabilities. The results of this research can be applied in the fundamental data to promote the regional renewable industries.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.97-104
• /
• 2016

Because of rapid growth of data size, the number of data storage has been increased. When using multiple data storages, a distribute file system is essential to insure the availability of data files. The power consumption is a major problem when using a distributed file system with many data storages. Previous works have aimed at reducing the energy consumption with efficient file block layout by changing some data servers into stand-by mode. The file block migration has not been seriously considered because migration causes large cost. But when we consider addition of a new data server or file, file block migration is needed. This paper formulates the minimization of data block migration as an ILP optimization problem and solves it using branch-and-bound method. Using this technique, we can maximize the number of stand-by data servers with the minimum number of file block movement. However, computation time of branch-and-bound method of an ILP optimization problem increases exponentially as the problem size grows. Therefore this paper also proposes a data block and data server grouping method to solve many small ILP problems.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.47-60
• /
• 2007

Conventional active surface wave measurements performed using a transient or continuous source are often limited in the maximum depth of penetration due to the difficulty of generating low-frequency energy with reasonably portable sources. This limitation may inhibit accurate seismic site response calculations because of the inability to define deeper subsurface structure. By measuring surface wave generated by passive sources including microtremors and cultural noise, it is possible to overcome this problem and develop soil stiffness profiles to much larger depth. Reliability of dispersion estimates from the passive surface wave measurements is critical to present reliable shear wave velocity profiles and can be improved by the measurements and analyses of passive surface waves based on correct understanding of systematic errors included in passive dispersion data. In this study, the systematic errors caused by poor wavenumber resolution and energy leakage into sidelobes in passive tests are mainly explored. Recommendations for reliable passive surface wave measurements and dispersion estimates are presented and illustrated at a site in San Jose, California, U.S.

• Solar Energy
• /
• v.17 no.2
• /
• pp.75-89
• /
• 1997

In this paper, the operating thermal characterictics of liquid-ice was expeimentally investigated in an adiabatic and a non-adiabatic direct contact liquid-ice heat exchanger. Experiments were carried out varing inlet temperature, Ice Packing Factor, and the flow rate of heat transfer fluid. The higher inlet temperature and the more much inlet flow rate, thermal stratification in liquid-ice heat exchanger was established faster. In the case of adiabatic ice storage tank, temperature distribution was a little higher at all conditions than that of non-adiabatic one. The ratio of latent energy to total discharge energy($E_{\lambda}/E_[tot}$) was about 80%, and the discharge of latent heat energy was appeared rapidly as inlet temperature and flow rate were higher.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.107-116
• /
• 2007

The introduction of new renewable energy is going on increase with the second plan of the Korean Government "Technology Development, Utilization and Popularization of New Renewable Energy". In general, it is connected to the power system due to the nature of it's source characteristics but it's interconnection operation impacts on the power system planning and operation. The operation schemes of the existing power distribution system are based on the unidirectional power flow, but unidirectional power flow changes to bidirectional power flow due to the interconnection operation of new renewable energy. It degrade the existing protection coordination system and power quality of the power distribution system. Thus, the technical evaluation process of the interconnection of new renewable energy are necessary. In this paper, the characteristics of the existing automatic recloser and sectionalizer are reviewed and interconnection capacity evaluation method of the DR(distributed resources) in the existing automatic recloser-sectionalizer protective coordination system are proposed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.98-106
• /
• 2013

The duty-cycle synchronization among mobile sensor nodes with energy-harvesting is very important. The nodes should keep their duty-cycle same to others as much as possible because they have to cooperate each other and to consume energy efficiently. The distribution of node position in network affects not only node connectivity but also the active time of synchronized nodes, and it relates to network life-time finally. In this paper, we introduce a network topology change algorithm (TCA) for energy-harvesting mobile sensor networks based on self-synchronized duty-cycling. The algorithm tries to change a network topology into a balanced topology where the mobile sensor nodes are unified according to the density of the number of nodes. For TCA, both fluid flow algorithm and flock dispersion algorithm are proposed and they are evaluated through the simulation in agent based modeling language. TCA is applied to the energy-harvesting mobile sensor networks to improve the synchronization of duty-cycle and to reduce the variation of energy consumption among nodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2253-2260
• /
• 2009

The typical distribution systems have the power flow from distribution substations (sources) to customers (load) only as one direction. However, in the case where new energy power sources are connected to distribution systems, the output variations of new energy sources to distribution systems, which is so called reverse power flow, may cause the bi-directional power flow. So, the reverse power flow has severe impacts on typical power system, for example power quality problems, protection coordination problems, and so on. Therefore, this paper proposes the algorithm for Multi-functional protection devices in distribution systems in the case where new energy sources are interconnected. The proposed algorithm is verified to show the effectiveness by simulating and experimenting the prototype systems.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.10-12
• /
• 2004

무선 센서네트워크는 센싱 지역에 분산되어 있는 초소형 센서 노드들이 감지/처리한 데이터를 수집노드로 전송하여 원격의 사용자가 센싱 지역의 상황인지를 가능하게 하는 유비쿼터스 컹퓨팅의 기반 네트워크이다. 전력 사용이 극히 제한된 센서 노드를 이용하여 무선 센서 망을 구성, 유지하며 데이터를 수집하기 위해서는 효율적인 망의 형태와 이에 따른 네트워크 배치 전략을 필요로 한다. 클러스터 기반 네트워크의 형태는 밀집도가 높은 센서네트워크에서 데이터병합을 수행하고 노드간 에너지 소비 균형을 이루기 위한 효과적인 구조이다. 본 논문에서는 클러스터 기반의 단일 홉 전송 구조에서 데이터 수집률을 높이고 노드간 에너지 사용의 균형을 이루게 하여 네트워크의 생존시간을 최대화할 수 있는 네트워크 배치 방법을 제안하였다. 클러스터링 기법에 따른 에너지 소비 모델을 분석하고 이를 통해 노드의 적절한 밀집도를 산출하였다. 싱크로부터 멀어질수록, 센서필드의 중앙보다는 외곽에 노드의 배치를 조밀하게 배치하여 네트워크의 생존시간을 늘렸다. 시뮬레이션을 통해 효율적인 네트워크의 배치가 노드간 에너지 소비의 균형을 이루도록 하여 네트워크의 생존시간을 늘일 수 있음을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.849-851
• /
• 2005

전력산업 구조개편 이후 여러 가지 형태의 새로운 전력시장 참여자가 나타났다. 지역 에너지 사업(CES : Community Energy Service) 사업도 이러한 새로운 시장참여자의 하나로 소비자에게 전기뿐만 아니라 열과 냉, 난방 서비스를 동시에 제공하는 역할을 수행한다. 대부분 분산전원 기술을 이용하는 지역 에너지 사업은 기존 발전 사업자들이 경험하는 환경문제나 대규모 투자에 따른 위험을 피할 수 있는 새로운 전력사업 형태로 각광받고 있다. 또한 송전망의 부담을 주지 않고 소비지에 인접하여 전력을 공급할 수 있기 때문에 송전망 투자도 절감할 수 있는 장점을 보인다. 본 연구는 지역 에너지 사업의 편익을 알아보기 위하여 부하 모델링을 통하여 지역 에너지 사업의 운영 경제성을 평가하였다. 특히 연료인 천연가스 요금과 전기부하의 변화에 따른 경제성 변화를 평가하여 민감도를 분석하였다.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.433
• /
• pp.102-113
• /
• 2013

전통적으로, 전력망의 규모는 최대 수요에 따라 결정된다. 이것은 많은 양의 전기를 저장하는 것은 기술적 및 경제적으로 실현 불가능하기 때문이다. 따라서 결과적으로 현재 사용하지 않는 거대한 용량의 전력망 이용이 가능하다. 이러한 비사용전력망의 이용이 가능하다면, 동일한 전력망으로 더 많은 에너지를 전송할 수 있어서 전력망 증강을 위한 투자를 연기하거나 생략 할 수 있다. 이를 위해서는 전기수요를 적기에 변경, 더 정확하게는, 전력 전송을 적시에 변경하는 것이 가능하여야한다. 원리적으로, 이것은 (분산되어 있는) 전기 저장을 전력망에 통합하면 가능하다. 본 논문은 전력 그리드를 위한 에너지 저장 기술에 관한 현재 지식상태를 요약하고자 한다. 가능하다면, 폭 넓은 이용과 관련된 핵심적인 특징들을 강조하는 체계적인 방법으로 에너지저장 기술 및 적용 등을 비교하여, 에너지 저장 기술 및 적용범위에 관심이 있는 정책 입안자를 위한 참고자료로 제공하기 위함이다.