• Applied Microscopy
• /
• v.35 no.4
• /
• pp.24-31
• /
• 2005

The preservative condition and ultrastructure on the mummified hair collected from newly found female mummy in Paju, were investigated by using scanning and transmission electron microscopes. The female mummy was found in september, 2002 during the traditional reburial process for the buried ones. The hair of 16th century mummy showed very intact appearances during observation with electron microscope. And the structures of the cortex, medulla and cuticle were well preserved. The cuticle layer was easily discernable, which are composed of six to seven cuticular cells. Each cuticular cells surrounded and thus seperated from its neighbors by intercellular membrane complex. In the cortex, many macrofibrils and some melanin granules between them were observed. We observed well preserved rod form macrofibrils running parallel along the direction of hair shaft. Especially, melanin granules were aggregated in the cortex which was adjacent to the cuticlu layer. As to the cause for the well-preservation of 440 year old hair sample, the presence of surface coat on the hair, which are composed of various materials. As calcium was included in the surface coat in Electron Dispersive X-ray Spectroscopy (EDS), the hardening process of the surface coat by calcium might inhibit the water or microorganism infiltration into the hair.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.646-651
• /
• 2018

This paper reports that the electronic properties at a $P3HT/TiO_2$ interface associated with exciton dissociation and transport can be tailored by the insertion of a graphene quantum dot (GQD) layer. For donor/acceptor interface modification in an $ITO/TiO_2/P3HT/Al$ photovoltaic (PV) device, a continuous GQD film was prepared by a sonication treatment in solution that simplifies the conventional processes, including laser fragmentation and hydrothermal treatment, which limits a variety of component layers and involves low cost processing. The high conductivity and favorable energy alignment for exciton dissociation of the GQD layer increased the fill factor and short circuit current. The origin of the improved parameters is discussed in terms of the broad light absorption and enhanced interfacial carrier transport.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.350-356
• /
• 2005

Poly(methyl methauylate)/montmorillonite nanocomposites were incorporated into acrylic bone cement in order to improve the mechanical properties and reduce the exotherm of acrylic bone cement. The nanocomposites were prepared using a suspension polymerization and characterized by scanning electron microscopy, X-ray diffraction, trans-mission electron microscopy, gel permeation chromatography, particle size analyzer and electron dispersive spectroscopy. The acrylic bone cements with poly (methyl methacrylate)/nanocomposite s were prepared and their thermal and mechanical properties were characterized. The prepared polymeric beads were composed of polymer-intercalated nanocomposites with partially exfoliated MMT layers, and the mean diameter of them was $50\~60$ fm with the spherical shape. The maximum setting temperature of the acrylic bone cements decreased from 98 to $81\~87^{circ}C$. The mechanical strengths and moduli of the acrylic bone cement with 0.1 $wt\%$ MMT were increased. compared to that without MMT. However, the mechanical properties were generally decreased with increasing incorporated MMT amounts. It is presumably due to the bubbles in nanocomposite beads generated during polymerization.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.123-135
• /
• 2018

This study tried to find the clue to Seokrok province by comparing Seokrok used in painting culture properties with Seokrok ore from domestic occurrence and imported Seokrok ore. To this end, chemical and mineralogical characteristics of painting cultural properties were identified with portable X-ray Florescence (p-XRF), micro X-ray diffraction (micro XRD) and SEM/EDS Analysis. To obtain Pb isotopic ratio, the Pb contained in Seokrok has been analyzed with Thermal Ionization Mass Spectrometer. Atacamite (or botallackite) and small quantity of brochantite were identified from Seokrok in Dancheong, and malachite was also identified from Buddhist painting besides those two ingredients. Without distinction of type, most Seokrok used in painting cultural properties is atacamite composed of Cu and Cl. From Pb isotope analysis, it was found that Seokrok in painting cultural properties was closer to that of north Korea, north China and Japan than south Korea as in regional division for East North Asia suggested by Mabuchi. The Pb isotopic ratio of domestic green mineral belongs to the distribution of Seokrok inside the painting cultural properties but imported malachite showed considerably difference. Considering the fact that atacamite, the main mineral of Seokrok in painting cultural properties is rarely produced from southern mine of the Korean Peninsula and the result of Pb isotope analysis.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.31-37
• /
• 2016

Ranging is divided into a synchronous scheme and an asynchronous scheme according to the presence of global synchronization between nodes. In general, the asynchronous ranging is preferred over synchronous ranging because it does not require an expensive high-precision oscillator for the global synchronization. On the other hand, in a conventional asynchronous ranging scheme, the packets, which are generated by all nodes in a positioning system of a large-scale infrastructure and need to be sent for localization by reference nodes, are considerable, which cause an increase in network traffic as the number of nodes increases. The traffic congestion lowers the throughput of the network leading to a considerable loss of energy. To solve this problem, this paper proposes a ranging scheme, in which virtual transmission slots randomly and discretely selected by a plurality of nodes are used to reduce the overheads needed in synchronizing the nodes, and the ranging is performed asynchronously based on the virtual transmission slots, thereby decreasing the network traffic. In addition, a performance test proved that the proposed ranging scheme was stronger than the TWR and SDS-TWR on an error range, even though the intensity of traffic was very low.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.24-30
• /
• 2009

Rare earth based calcium aluminate phosphor ($CaAl_2O_4:Eu^{2+}$, $Nd^{3+}$) supported $TiO_2$ nanoparticles are synthesized by using sol-gel method, which are further characterized using powder X-ray diffraction (XRD), fourier transform infrared (FT-IR), diffuse reflectance UV-Visible spectroscopy (DRS UV-Vis) and transmission electron microscopy (TEM). The XRD pattern of as-prepared and sintered phosphor supported $TiO_2$ does not show the tendency to change the crystal structure from anatase to rutile phase up to $600^{\circ}C$. This indicates that the phosphor support might inhibit the densification and crystallite growth by providing dissimilar boundaries. The diffuse reflectance spectral (DRS) measurements showed shift towards longer wavelength indicating reduction in the band-gap energy as compared to free $TiO_2$. The FT-IR spectra of phosphor supported $TiO_2$ nanoparticles show shift in the peak positions to lower wavelengths. This indicates that the $TiO_2$ nanoparticles are not free, but covalently bonded to the phosphor support. TEM micrographs show presence of crystalline and spherical $TiO_2$ nanoparticles (8 - 15 nm diameter) dispersed uniformly on the surface of phosphor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.474-481
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.528-535
• /
• 2020

Recently, the protection coordination method of DC systems has been presented because renewable energy and distributed resources are being installed and operated in distribution systems. On the other hand, it is difficult to detect ground faults because there is no significant difference compared to a steady-state current in ungrounded IT systems, such as DC load networks and urban railways. Therefore, this paper formulates the detection principle of IMD (Insulation Monitoring Device) to use it as a protection coordination device in a DC system. Based on the signal injection method of IMD, which is analyzed by a wavelet transform, this paper presents an algorithm of detecting ground faults in a DC system in a fast and accurate manner. In addition, this paper modeled an IMD and an ungrounded DC system using the PSCAD/EMTDC S/W and performed numerical analysis of a wavelet transform with the Matlab S/W. The simulation results of a ground fault case in an ungrounded DC system showed that the proposed algorithm and modeling are useful and practical tools for detecting a ground fault in a DC system.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.119-129
• /
• 2012

Excavated textiles provide very important research data on the costume culture of the Joseon dynasty. In particular, dyed textiles are indispensable for textile conservation research and for restoration of remains as well as for general costume culture research. Unfortunately, a prolonged burial environment causes the colors to change and gradually fade after excavation. Therefore, it is very difficult to identify the original color. In this study, natural dyed samples of red, yellow, purple and blue were prepared and analyzed using HPLC-PDA. Dyes of colorants extracted from excavated textile remains were analyzed by HPLC. In addition, mordants were analyzed using (SEM-EDX) in order to estimate the original color. The 16~17th Century's three samples were analyzed, sample 1, and 2 from Eunjin Song's Song Mun-Chang excavated at the Songchon-dong in Daejeon, and sample 3 from Yeosan Song's Song, Hee-Jong excavated at the Mokdal-dong in Daejeon. From the HPLC results, alizarin, purpurin, and indigo were detected on sample 1, alizarin and purpurin on sample 2, ellagic acid and indigo on sample 3. Therefore they were dyed with madder and indigo (sample 1), madder (sample2), pomagranted and indigo (sample 3). Al mordant was identified on three samples.