• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.340-346
• /
• 2008

The aim of this study is to understand the effect of structure on the dispersion of both CNT and GNF in the phase of synthesized polyurethanes matrix. Various CNT/PU and GNF/PU composite films were prepared. Polyurethane having a different hard segment was blended with both CNT and GNF. PU having HDI as hard segment showed good dispersion with both CNT and GNF because of their linear structural character and molecular kinesis while PU having aromatic ring showed poor dispersion with those due to their structural complexity. Structural effect also induced the increase of its electro conductivity. The PU/CNT composite showed a bad dispersion (because of phase separation between PU matrix and CNT) but good electro conductivity at its surface (because CNT was collected on the surface of composite film due to low density of CNT). PU/CNT and PU/GNF composite films have quite low normalized sheet resistance value compared with silver/PU nanocomposite film because the fiber type filler could have much more contact points than that of sphere shaped silver particles have.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.862-865
• /
• 2011

현재 IPv4 주소가 고갈됨으로써 IPv6 를 사용할 수 밖에 없는 상황에 놓여지게 되었다. 그리고 IPv6 주소체계를 이용하다 보니 이에 따른 보안취약점들이 발견되었다. IPv6 보안취약점에는 확장헤더, ICMPv6, NDP, 다양한주소에 따른 취약점들이 있다. 이것뿐만 아니라 IPv4 와 IPv6 네트워크 간에 통신이 가능한 6to4, ISATAP, Tunnel Broker, Teredo 와 같은 기술이 나오게 되었고, 이러한 것들 또한 보안취약점이 발견되었다. 6to4 보안취약점에는 분산반사 스푸핑 트래픽 공격이 있고, Teredo 에는 로컬 peer 발견 절차에 다른 캐쉬 오버플로우 공격이 있다. 그리고 ISATAP 에는 라우터를 가장한 MITM 공격이 있고, Tunnel Broker 에는 Tunnel Borker 와 Tunnel Server 를 위장하여 공격하는 방법이 있다. 이렇게 IPv6 주소체계로 바뀌면서 생기는 새로운 보안취약점들에 대응하기 위해 현재 존재하는 라우터 같은 네트워크장비들도 보안취약점에 대응할 수 있는 변화가 필요하다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.38-44
• /
• 2002

Dispersion stability of nano-sized rutile TiO$_2$powder with acicular typed primary particle produced by homogeneous precipitation process at low temperatures was studied in aqueous and non-aqueous media in the presence of various electrolytes. The zeta potential measurements have shown that the addition of electrolytes to aqueous and non-aqueous dispersion media leads to charge reversal on TiO$_2$particle surface. The electrostatic repulsive forces acting on between TiO$_2$particles dispersed in non-aqueous media were found to be significantly greater than that in aqueous media, which relate closely to the physical properties of the organic solvents, such as viscosities and dielectric constants. The pH values, the concentration of electrolytes and the valence of the ions have changed greatly the surface potential of TiO$_2$ particles and have governed the dispersion behavior of TiO$_2$particles virtually.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.275-281
• /
• 2004

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. This study compare the whole boundary point error When producing EDM measurement using this GPS observation results and setting digital topographic map and nautical chart by these boundary.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.54-54
• /
• 2011

방사 공정 최적화를 위해 칩(chip)건조를 실시하여 칩의 수분을 모두 제거한 후 실험을 진행하게 된다. 칩은 그 자체가 공정수분율(0.4%) 또는 그 이상의 수분을 함유하고 있으므로 건조하지 않고 방사하면 현저히 가수분해가 일어난다. 가수분해가 일어난다면 PET 분자량도 저하되어 고분자의 성질을 잃게 되어 방사된 섬유의 물리 화학적 성질에 중요한 영향을 받게 된다. 그러므로 가수분해를 방지하기 위하여 칩내 수분을 제거하는 건조 공정을 거치는 것이다. 개발된 나노은입자을 함유한 Ag/PET 마스터배치의 제사성 및 가연성 평가을 위한 파일럿연구를 행했다. 본 연구에서 사용한 은나노 M/B 칩(chip)의 경우 일반적으로 사용하는 PET 칩에 비하여 낮은 고유점도를 가지므로 방사성에 칩의 수분이 더욱 영향을 미칠 것이라 판단되어 건조공정에 특별한 주의을 하여 진행하였다. 마스터배치의 고유점도(IV)값의 변화에 따른 제사성 및 가연성 평가를 관찰하였다. #3 M/B 칩의 제사성이 #1 M/B 칩 대비 공정성이 개선되어 두 품종 모두 비출사가 발생하지 않았으며, M/B 제조시 분산제 유무에 따른 방사공정성의 차이는 없는 것으로 보인다. 따라서 #1 M/B 대비 공정성이 개선된 점은 M/B의 IV개선에 기인하는 것으로 판단되었다.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.3
• /
• pp.376-389
• /
• 2012

Ethnic entrepreneurship, an important means by which immigrants improve economic status, is widely believed to be facilitated by their residential concentration, i.e. ethnic enclaves. However, the recent immigrants' residential dispersion and re-clustering in some selected well-to-do suburbs portend changes in the role of ethnic enclave as a nest of immigrant entrepreneurship. This paper investigates the impacts of the residential dispersal on ethnic entrepreneurship with a case study of Korean small businessmen in Chicago, Illinois PMSA. The research utilizes the Public Use Microdata Sample (PUMS) to know the overall changes in Korean entrepreneurship through 1990s and conducts a survey to understand reactions and surviving strategies of Korean enclave businessmen to the residential shifts. Relevant to those analyses is the enclave-economy hypothesis which argues benefit from spatial clustering of co-ethnic entrepreneurs by yielding more business opportunities and higher returns.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.467-474
• /
• 2012

UAVs for reconnaissance and intelligence operations require long endurance capability, which demands high efficiency of the propulsion system. The distributed propulsion system(DPS) generates the thrust by replacing a large propulsion system with a number of small propulsion systems. A DPS distributed along the wing span can produce gains in propulsion efficiency by reducing ejection velocity. Also, the ingestion of boundary layers through the distributed DPS inlet and ejecting flow from the outlet can improve the lift to drag ratio of the vehicle. This study investigates the effects of locations and size of the inlet and outlet of the DPS on the blended-wing-body design based on Eppler 337 airfoil, with a CFD tool. The fans in the DPS are modeled as actuator disks for computational efficiency. The best location and aspect ratio of the inlet and outlet are found from lift-to-drag ratio and pitching moment considerations.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.967-970
• /
• 2000

본 논문에서는 기동하는 표적을 추적하기 위한 표적의 운동 모델링 방법에 대해서 다룬다. 실제 표적의 운동은 진행방향으로의 가속과 이와는 독립적인 방향 전환으로 이루어진다는 점에 착안하여 표적의 진행방향에 따라 동작 잡음의 분산 행렬이 변화하는 표적 중심 모델을 제안하고, 이를 IMMPDAF(Interacting Multiple Model Probabilistic Data Association Filter)에 적용하였다. 모의실험을 통해 기존의 모델을 사용한 IMMPDAF와 비교하였으며, 그 결과 기동 구간의 오차가 30% 정도 줄어들며 추적 실패율도 낮아짐을 볼 수 있었다.

• Korea Petroleum Association Journal
• /
• no.2 s.180
• /
• pp.84-103
• /
• 1996

최근 미국의 중견석유기업 및 유럽의 주요석유기업의 전략에 단적으로 보여지고 있는 것 같이 석유산업에 있어서 「인티그레이션(통합)」의 개념이 바뀌고 있다. 요컨대, 1970년대 이전에 보여주었던 「석유흐음의 중시」의 수직통합의 움직임에 대신하여 (페르시아만 산유국을 중심으로 종래의 수식통합지향의 기업도 일부 존속하고 있는 곳도 있다.) 자사내의 수직통합이 아닌 시장지향 (Market Oriented)을 특성으로 한 새로운 「통합」전략을 표방하는 기업이증가하고 있다. 한편으로 가장 우위를 점하고 있는 분야ㆍ지역으로의 특화 및 사업의 「분산」화를 경영전략으로서의 표방하는 기업도 출현하는 등 시장의 글로벌화가 진전하고 있어, 구미석유산업에 있어서 「제자리 찾기」가 서서히 선명화하고 있다.