• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.331-339
• /
• 2018

The IEEE 1588, commonly known as a precision time protocol (PTP), is a standard for precise clock synchronization that maintains networked measurements and control systems. The best master clock (BMC) algorithm is currently used to establish the master-slave hierarchy for PTP. The BMC allows a slave clock to automatically take over the duties of the master when the slave is disconnected due to a link failure and loses its synchronization; the slave clock depends on a timer to compensate for the failure of the master. However, the BMC algorithm does not provide a fast recovery mechanism in the case of a master failure. In this paper, we propose a technique that combines the IEEE 1588 with network bonding to provide a faster recovery mechanism in the case of a master failure. This technique is implemented by utilizing a pre-existing library PTP daemon (Ptpd) in Linux system, with a specific profile of the IEEE 1588 and it's controlled through bonding modes. Network bonding is a process of combining or joining two or more network interfaces together into a single interface. Network bonding offers performance improvements and redundancy. If one link fails, the other link will work immediately. It can be used in situations where fault tolerance, redundancy, or load balancing networks are needed. The results show combining IEEE 1588 with network bonding enables an incredible shorter recovery time than simply just relying on the IEEE 1588 recovery method alone.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.190-203
• /
• 2016

Based on the premise that a systematic career process was one of the essential elements of successful task performance both for individuals and the organization in the field of social welfare, this study set out to empirically analyze factors influencing the career commitment of social workers at a multidimensional level and provide practical implications for the directionality of career management on the basis of data with theoretical and statistical accuracy. For those purposes, the study collected individual and organizational characteristics data from 787 social workers at 46 agencies through a structured questionnaire and analyzed influential factors through the multilevel analysis technique by taking organizational effects into account. The analysis results show that explanations by the organization characteristics recorded significant 15% in the total variance of career commitment and that its influential factors included such significant variables as the protean career attitude, desire for growth, human network, and self-efficacy at the individual level and also the qualification compensation system at the organizational level. The study then proposed and discussed integrated practice strategies between individuals and agencies as the measures to promote career success through the activation of individual factors based on the consideration of organizational effects such as the application of an employee assistant program, provision of incentives to professional career development, and shift to a learning organization.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2018

It is difficult to predict the early-age cracks of strain restrained concrete members due to environmentally sensitive parameters. A new method is proposed to predict the cracks by test of autogenous deformation and self-induced restrained stress of specimens which simulates early-age crack state by hydration heat of the'Wall-On-Foundation'members. For this purpose, thermal analysis of entire structure considering the environmental condition is performed at first, and the specimens are set up where hydration heat was electronically controlled according to the analysis results. By measuring free deformation and force to compensate the autogenous strain including relaxation, feasibility of cracks can be estimated. The proposed method can predict the occurrence of cracks better than the material test of the early age concrete which has large variance. The method of this study is particularly useful when it is used as a preliminary experiments to predict the crack more precisely before full-scale concrete placement in construction of large structures.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.535-541
• /
• 2005

We report on the development of a passively mode-locked near-infrared femtosecond laser with Cr:YAG crystal that operates near room temperature. The laser wavelength could easily be tuned by using only the internal prism pair over 110 nm from 1400 nm to 1510 nm in cw and over about 30 nm in mode-locked operation, respectively Maximum cw output powers of 810 mW were obtained with $1.5 \%$ output coupler for absorbed pump powers of 7.6 W. For compensation of the internal group velocity dispersion, an IR graded prism pair was used. The Cr:YAG laser delivered nearly Fourier-transform limited pulses with a pulse duration as short as 64 fs at 100 MHz repetition rate. In the mode-locked regime, the laser was operating at 1510 nm with a spectral bandwidth of 44 nm. In order to avoid unstable mode-locking and power instabilities, self-built tubes were inserted into the beam path in the resonator and purged with N2 gas. Finally, output powers of the Cr:YAG laser were optimized to 250 mW fer long time stable mode-locked operation.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.786-791
• /
• 2007

Korean high speed train(HSR-350x) has adopted a combined electrical and mechanical(friction) braking system. Brake blending control unit(BBCU) controls each brake system to fulfill the required brake performances such as braking distance, deceleration and jerk. Also the braking system should be designed considering the economical management, such as effective use of generated braking energy and the minimum wear of friction materials(a pad and a brake shoe). In this paper, we establish the disc braking force pattern that reduces the wear of pad in the disc braking system by minimizing the variance of the instantaneous disk baking energy during braking time, and compare the wear mass of pad between the conventional disc braking force pattern and the established results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.50-59
• /
• 2006

The new communication paradigm is rapidly shifted from wireless mobile networks to an All-IP(Internet Protocol) network, led by service industry leaders and communication manufacturers. In this paradigm, providing authentication and session keys of a subscriber becomes one of the critical tasks because of IP open accessibility among heterogeneous networks. In this paper, we introduce authentication process procedure of heterogeneous wireless mobile networks and develop so-called IMAS(Integrated Mobile Authentication Server) which can securely inter-work among all mobile networks and support the legacy networks with backward compatibility. Especially, in designing IMAS, mobile authentication inter-working mechanism, key management technique, and other issues to be overcome are presented. We analyze and evaluate the performance of authentication algorithm which creates session key. A simulation environment of IMAS is established, and a performance(TPS; Transaction Per Second) result is analyzed and evaluated. It turned out that IMAS works among heterogeneous wireless mobile networks without compensating efficiency and functionalities of the legacy networks and decrease the entropy of data redundancy and data inconsistency among networks because of the integrity of the distributed Data Base(DB).

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.179-190
• /
• 2012

In Distributed Video Coding(DVC), a low complexity encoder can be realized by shifting complex processes of encoder such as motion estimation to decoder. Since not only motion estimation/compensation processes but also channel decoding process needs to be performed at DVC decoder, the complexity of a decoder is significantly increased in consequence. Therefore, various fast channel decoding methods are proposed for the most computationally complex part, which is the channel decoding process in DVC decoding. As the channel decoding process becomes faster using various methods, however, the complexity of the other processes are relatively highlighted. For instance, the complexity of side information generation process in the DVC decoder is relatively increased. In this paper, therefore, a fast method for the DVC decoding is proposed by using adaptive search range method in side information generation process. Experimental results show that the proposed method achieves time saving of about 63% in side information generation process, while its rate distortion performance is degraded only by about 0.17% in BDBR.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.140-151
• /
• 2012

In Wyner-Ziv coding, key picture is encoded by conventional H.264/AVC intra coding which has low complexity. Although inter coding is more efficient than intra coding, its complexity is much higher than intra coding due to its motion estimation. Since the main feature of Wyner-Ziv coding is low complexity of encoder, inter coding is not suitable to encode key picture in Wyner-Ziv coding. However, inter picture coding with zero motion vector can be usable for Wyner-Ziv key picture coding instead of intra coding. Moreover, while current transform-domain Wyner-Ziv residual coding only utilizes temporal correlation of WZ picture, if zero motion coding is jointly used to encode key picture in transform-domain Wyner-Ziv residual coding, there will be a significant improvement in R-D performance. Experimental results show that the complexity of Wyner-Ziv coding with the proposed zero motion key picture coding is higher than conventional Wyner-Ziv coding with intra key picture coding by about 9%, however, there are BDBR gains up to 54%. Additionally, if the proposed zero motion key coding is implemented on top of the transform-domain Wyner-Ziv residual coding, the result shows rate gains up to 70% in BDBR compared to conventional Wyner-Ziv coding with intra key picture coding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1694-1704
• /
• 2015

In this paper, a robust trajectory tracking control method of a wheeled mobile robot is newly proposed combining the PDC and the ISMC. The PDC is a relatively simple and easy control method for nonlinear system compared to the other non-linear control methods. And the ISMC can have robust and stable control characteristics against model uncertainties and disturbances from the initial time by placing the states on the sliding plane with desired nominal dynamics. Therefore, the proposed PDC+ISMC trajectory tracking control method shows robust trajectory tracking performance in spite of external disturbance. The tracking performance of the proposed method is verified through simulations. Even though the disturbance increases, the proposed method keeps the performance of the PDC method when there is no disturbance. However, the PDC trajectory tracking control method has increasing tracking error unlike the proposed method when the disturbance increases.