• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.193-199
• /
• 1998

The mixtures of ultra-high molecular weight polythylene (UHMWPE), high density polyethylene (HDPE), process oil (mineral oil) and potassium hexatitanate whisker were melted and mixed at $150^{\circ}C$ for 30min, and prepared by compression molding to the specimen of separator of about $200{\mu}m$ thickness at the same temperature and 5000 psi. Thereafter the pores were formed by extracting process oil with organic solvents. In this study, the range of PR (the ratio polymer to process oil) was varied from 0.1 to 0.5 because the specimen turned into rubbery phase at which PR was below 0.1 whereas it changed into gel phase at which PR was above 0.5. When the specimen was treated with nonpolar organic solvents, process oil was extracted nearly 98%. Tensile strength was $31kg/cm^2$ at PR = 0.426, and resistance of specimen was $37m{\Omega}/cm^2$ at PR = 0.186, and $53m{\Omega}/cm^2$ at PR = 0.426. The $N_2$ adsorption-desorption isotherm showed a hysteresis representing regions of capillary condensation, and the surface area at PR = 0.186 was relatively large as $130cm^2/g$. Potassium hexatitanate whisker was randomly dispersed in between PE layers. It might be that the whisker is intercalated through the PE thin layers oriented by compression.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.742-750
• /
• 2020

The flow noise generated by hull appendages is directly related to the performance of the sonar in terms of self-noise and induces a secondary noise source through interaction with the propeller and rudder. Thus, the noise in the near field should be analyzed accurately. However, the acoustic analogy method is an indirect method that is not used to simulate the propagation of an acoustic signal directly; therefore, diffraction, reflection, and scattering characteristics cannot be considered, and near-field analysis is limited. In this study, the propagation process of flow noise in water was directly simulated by using the lattice Boltzmann method. The lattice Boltzmann method could be used to analyze flow noise by simulating the collision and streaming processes of molecules, and it is suitable for noise analysis because of its compressibility, low dissipation rate, and low dispersion rate characteristics. The flow noise source was derived using Reynolds-averaged Navier-Stokes equations for the hull appendages, and the propagation process of the flow noise was directly simulated using the lattice Boltzmann method by applying the developed flow-acoustic boundary conditions. The derived results were compared with Ffowcs Williams-Hawkings results and hydrodynamic pressure results based on the receiver location to verify the usefulness of the lattice Boltzmann method within the near-field range in comparison with other techniques.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.425-434
• /
• 2007

Even though Internet backbone speeds have increased in the last few years due to projects like Internet 2 and NGI, many high performance distributed applications are able to achieve only a small fraction of the available bandwidth. The cause of such problem is due to a character of TCP/IP. The primary goal of this protocol is reliable data transmission. Therefore high speed data transmission didn't be considered when TCP/IP is designed. Hence several researchers have been studied in order to solve the problem of TCP/IP. One of these research results, parallel transfer technique, solves this problem to use parallel TCP connections on application level. Additionally, this technique is compatibility. Recently, these researchers have been studied a mechanism to decide the number of parallel TCP connections. However, some researchers reported the number of parallel TCP connection base on only empirical results. Although hardware performance of host affects transmission rate, the hardware performance didn't be considered in their works. Hence, we collect all data related to transmission rate, such as hardware state information (cpu utilization, interrupt, context switch). Then, we analyzed collected data. And, we suggest a new mechanism determining number of parallel TCP connections for maximization of performance based on our analysis.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.21-33
• /
• 2008

The wireless sensor nodes near to the fixed sink node suffer from the quickly exhausted battery energy. To address this problem, the mobile sink node has been applied to distribute the energy consumption into all wireless sensor nodes. However, since the mobile sink node moves, the data collection scheduling scheme is necessary for the sink node to receive the data from all sensor nodes as fair as possible. The application fields of wireless sensor network need the real-time processing. If the uneven data collection occurs in the wireless sensor network, the real-time processing for the urgent events can not be satisfied. In this paper, a new method is proposed to support the lair data collection between all sensor nodes. The proposed method performs the scheduling algorithm based on the resident time of the sink node staying in a radius of communication range and the amount of data transferred already. In this paper, the proposed method and existing data collection scheduling schemes are evaluated in wireless sensor network with the mobile sink node. The result shows that the proposed method provides the best fairness among all data collection schemes.

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.93-100
• /
• 2011

This dissertation analysed actuality and literatures aimed at optimizing added value of Busan Port. As far as the literatures are concerned, the limits and the direction to go of Busan Port have been reached through analysing and comparing Busan Port, Antwerp Port, and Rotterdam Port by their each function. While Rotterdam and Antwerp Port are each functioning as an integrated port disposing container freight, general freight and liquid cargo, the container of Busan port contributes over 88 percent of its cargo and the function of the others like bulk is scattered to Ulsan, Masan, and Jinjae Port. Hereby, Busan Port needs to develop its function so as not to duplicate its function with the others in Korea and add value of theirs each. As a result of the local experts about analysing actuality, it turn out that it is similar with the literatures. In macroscopic view, specialization mainly with container, general cargo disposal ability enforcement and etc. are the most important. In microscopic view, rear complex of container tier and the supply base of liquid energy.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.709-716
• /
• 2006

According to the increase of various AV media devices and contents in the digital home, the DLNA becomes to play an important role as the interoperability standard between then Since this guideline only focuses on the interoperability among home networked devices, media players, and media contents existing inside of the homenetwork, there is no retrieval and transmission method for sharing multimedia contents located over several homes via Internet. Additionally, this guideline lets device-detection and notification messages to be transmitted using W multicast methods, and current Internet environment cannot guarantee consistent IP multicast services, it has the limitation that it cannot retrieve and control DLNA devices in other digital homes remotely via the Internet. Therefore, in this paper, we propose the IHM(Inter-Home Media) proxy system and its operating mechanism to provide a way of sharing media contents distributed over multiple DLNA-based homes, through analyzing these limitations and building up a sharing method for A/V media contents distributed over the DLNA homes based on the dynamic or private IP networks. Our method removes the limitation on the user locations through sharing distributed media contents, and also makes cost-downs for storing media contents, from the view point of individual residents.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.32-39
• /
• 2013

The next generation high-speed train(HEMU-430X) is Korea's first electric multiple unit type, high speed vehicle resulting from a national R&D project. Tests have been conducted on the Kyungbu High Speed Line running at speeds up to 354.64km/h, and analysis of the dynamic behavior of the train was carried out to evaluate its safety. In this study, a simplified method using an accelerometer(the method specified in UIC 518 OR) was chosen to analyze the safety of the train's dynamic behavior. The section chosen for analysis section was ${\pm}10{\sim}20km/h$ with respect to the maximum speed point. In addition, we analyzed the trend of this dynamic behavior with increasing speed by comparing the analyzed values with those of UIC 518 OR. The dynamic behavior results met the limit values of UIC 518 OR and the study indicates that this trend is predicted to continue at speeds above 354km/h.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.15-28
• /
• 2016

Water-in-oil emulsions including water-in-ester oil and water-in-silicone oil (W/O+S) have various advantages such as blocking moisture evaporation and forming air permeable membrane. However, their applications have been limited due to the poor stability under low viscosity condition. In this study, we investigated the effect of synergistic interaction between nonionic surfactant, micro-size particles and cationic surfactant on the stability of W/O+S formulation. The stability of W/O+S emulsions was changed as a function of cationic surfactant concentration where it increased at lower concentration and then started to decrease above a critical point. Finally, emulsion phase inversion occurred at a high concentration. The results suggest that W/O+S emulsions of low viscosity ranging from 2000 to 5000 cps can be stabilized under the conditions where a nonionic surfactant, micro-size particles and a cationic surfactant are used in the range of 1.0 ~ 4.0 wt%, 2.5 wt% and 0.1 ~ 0.5 wt%, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.167-178
• /
• 2014

As large-scale housing sites are being developed rapidly in Sejong City, which was launched in 2012 for resolving the adverse effects of overconcentration in the capital area, promoting balanced development of the country, and reinforcing national competitiveness, changes in spatial structure are expected in the surrounding areas. For setting the directions of urban planning, it is essential to understand changes in spatial structure. This study purposed to measure changes in the spatial structure of neighboring areas resulting from the construction of Sejong City by approaching from the aspect of spatial interaction. In the analysis, we calculated population potential for future spatial interaction using the accessibility model, and interpreted quantitatively and qualitatively the outcomes of spatial interaction among neighboring areas before and after the construction of Sejong City using population potential as an indicator. According to the results of the analysis, the impact range of the population potential of the subject areas had been shrinking continuously since 1995, and in 2013 population potential dispersed as the population concentrated on and around Cheonan City. Although Sejong City, as a new area of population potential, was not found to play the role of a pivotal point for the surrounding areas, it is probably because the analysis was made just after people began to move to Sejong City. Accordingly, along with the effort of Sejong City to reach the planned population, it is necessary to keep monitoring changes in related factors and changes in the spatial structure of the surrounding cities resulting from the growth of population.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.198-204
• /
• 2007

The effects of annealing temperature on electromagnetic wave absorption characteristics in $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ (at%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ for 1 h exhibited highest power loss in the GHz frequency range as compared with the sheets composed of the alloy flakes annealed at higher temperature than $475^{\circ}C$ or in as-milled state. Moreover the imaginary part of complex permeability had largest value in the GHz frequency range for the sheets including the flakes annealed at $425{\sim}475^{\circ}C$. The large value of power loss of the sheets including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ was attributed to the high imaginary part of the complex permeability. However, because of its large transmission parameter $S_{21}$, the composite sheet having the magnetic flakes annealed at $525^{\circ}C$ showed low power loss.