• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.789-798
• /
• 2011

We carry out an experimental investigation to analyze the basic performance of NO(nitric oxide) storage in a lean phase and also analyze the NO reduction achieved by the spraying of reducing agents in the rich phase of the exhaust gas in an LNT(Lean NOx Trap). This is an after-treatment system used to reduce the NOx emissions from a diesel engine. If the stored NO is reduced, we measure the outlet concentration downstream of the LNT. The test LNT material used in the experiments is commercial LNT. After being canned into stainless-steel(SUS304), it was built in a micro bench-flow reactor. Compositions of feed gases, three heated and three no heated gases were sprayed upstream of the LNT to analyze the characteristics. We use various temperatures and space velocities as response variables.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.471-480
• /
• 2000

대체연료로서 바이오 연료의 디젤엔진에의 적합성을 파악하기 위하여 경유, 가온 미강유, 초음파 적용 가온 미강유, 미강유 메틸 에스테르, 폐식용유, 초음파 적용 폐식용유, 폐식용유 메틸 에스테를 14kW 예연소실식 디젤 엔진의 연료로 사용하여 그 성능과 배기배출물을 측정하였다. 시험에 사용한 바이오 연료들에 의해 엔진 분사 펌프의 조정이나 다른 부품의 개조를 하지 않고도 단기간 전부하 상태로 1,600~2,800 rpm 의 범위에서 엔진은 정상적으로작동하였다. 바이오 연료를 사용하였을 경우 전반적으로 엔진성능과 배기 배출물 특성에 있어서 경유를 사용하였을 경우와 비견할만 하였으며 특히 매우 낮은 농도의 $SO_2$와 매연을 배출하였다.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.45.2-45.2
• /
• 2010

자동차 주행 시 엔진회전수가 1,500rpm 이상이고 주행속도가 50km/hr 이상의 조건에서 가속 페달을 밟지 않은 상태로 관성주행(타행주행)을 하면 연료분사량이 "0"이 되고 그에 따라 엔진 배출 $CO_2$ 배출량도 "0"이 된다. 본 연구에서는 고속도로 및 자동차 전용도로에서의 이러한 연료차단(퓨얼컷 fuel-cut) 주행 구간을 찾고 연료차단 기능을 활용하는 경우 그 효과를 평가하였다. 본 시험의 결과 퓨얼컷 주행을 활용하면 약 4~5% 정도의 $CO_2$ 배출량을 줄일 수 있음을 알 수 있었고, 감속의 정도를 도로 상황에 맞게 최적화하는 경우 감소율을 더욱 향상시킬 수 있을 것으로 판단된다. 추후 본 시험의 결과를 이용하여 도로 내리막 구간에서 연료소모량 및 $CO_2$ 배출량을 저감하면서도 과속으로 인한 사고를 예방하는 방안으로 활용할 수 있을 것으로 판단된다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.525-530
• /
• 2013

In this study, the generator engine of training ship M/S "HAE RIM" of Kunsan National University which is being operated for 20 years was used in the experiment. The experiment was carried out under the engine speed of 1200rpm, then the load was varied 30 kW intervals from 0 to 90 kW and the injection timing was varied $2^{\circ}$CA intervals from BTDC $19^{\circ}$ to $23^{\circ}$CA. In the case of advancing fuel injection timing from BTDC $21^{\circ}$CA to $23^{\circ}$CA, specific fuel consumption is decreased by 1.37%, NOx is increased by 11.59 %, soot is decreased by 23.5 % and $SO_2$ is decreased by 2.8 %. Accoring to the analysis of effects of fuel injection timing on combustion & exhaust emissions characteristics on an old marine diesel engine, it is proved that the optimum fuel injection timing is BTDC $23^{\circ}$ which is $2^{\circ}$ faster than that of original injection timing.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.74-84
• /
• 2016

After Sep. 2017, the LEV3 emission standard will be applied to gasoline and gas vehicles in Korea. This standard has HWFET and SFTP standard as well as FTP-75. Most of LPG vehicles were certificated as SULEV in Korea. Until now, only FTP-75 standard is applying for the certification but it is expected that HWFET and SFTP are used after beginning LEV3. In this paper, 8 LPG and 4 gasoline vehicles were tested on FTP-75 and SFTP to check whether the LPG vehicles can meet LEV3 SFTP standard or not and to suggest direction of development. Most of test vehicles did not meet the SFTP standard. To make up for the fault, fuel injection control improvement is needed.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.22-28
• /
• 2021

Combustion characteristics were examined experimentally for a swirl-stabilized double cone premixed burner nozzle used for industrial gas turbines for power generation. An original model and a variant with a different fuel injection pattern are tested to compare their combustion characteristics such as NOx, CO and stability in pressurized conditions with single burner-flame and in an ambient multi-flame conditions with multi-burners. Test results show that NOx emissions are smaller for the variant, whose number of fuel holes is reduced with the same total area of fuel holes, in ambient and pressurized single-flame conditions with single burner, which results from enhanced fuel/air mixing due to a higher penetration of fuel into the air stream. The multi-burnerflame test results show that NOx emissions are smaller for the variant due to reduced flame interactions, which, on the contrary, slightly reduces the stability margin. On-site test results fromin an actual power plants also show that NOx emissions are reduced for the variant, compared with the original one, which is in agreement with the lab test results stated above.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1199-1206
• /
• 2015

In this study, the exhaust gas of a diesel engine operating on biodiesel(BD) fuel(a mixture of diesel and soybean oil) was investigated for different fuel mixing ratios in the range of BD3 to BD100. The experiments were conducted using injection pressures of 400, 600, 800, 1000, and 1200 bar. The Pearson correlation coefficient and Spearman rank-order correlation coefficient were used to quantify the NOx and Soot emissions based on the fuel mixing ratio and injection pressure. Consequently, the Pearson correlation coefficient obtained for NOx and Soot emissions according to the mixing ratio and injection pressure was -0.811 and the corresponding Spearman rank-order correlation coefficient was -0.884, which indicated that the correlation of the NOx and Soot emissions was linear. Thus, the NOx and Soot have a trade-off relationship. Moreover, at each injection pressure, the Pearson correlation coefficient was a negative number, which indicated an inversely proportional relationship between NOx and Soot.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.272-277
• /
• 2009

Three dimensional numerical analysis for the coal fired boiler has been performed to investigate the effect of yaw angle variation of the secondary air nozzles on the combustion characteristics and NOx emission. It was found that the prediction gives a good agreement with plant data. The increase in yaw angle up to $20^{\circ}$ have results in the decrease in NOx emission at furnace exit and recirculation flow intensity, together with the increase of unburned carbon in ash. It also has been recognized the remarkably change in configuration of fire ball with increase in yaw angle. The results from this study would be valuable in the case of the combustion modification of the corner firing coal-fired utility boiler.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.39-44
• /
• 2002

배기가스의 규제가 전 세계적으로 강화되고 있는 가운데, 경유사용 디젤기관은 가솔린기관 보다 열효율이 높고 온실가스인 $CO_2$ 배출량이 적은 장점이 있으나, PM(입자상 물질)과 NO$_{x}$가 다량 배출되는 단점이 있다. 이들의 저감책으로서, 엔진개량, 연료분사장치의 고압화와 전자제어화, 배기 후처리기술의 적용 등 디젤기관의 고효율성을 손상시키지 않으면서, 배기공해를 대폭 저감하려는 연구가 활발히 추진되고 있으며, 한편으로는 디젤기관의 대체연료에 대한 연구가 활발히 추진되고 있다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.200-201
• /
• 2003

최근 들어 미국에서는 석탄 연소배가스 중에 포함된 미량의 중금속이 인체 및 환경에 심각한 피해를 줄 수 있다고 보고 이에 대한 연구를 진행하고 있으며, 특히 수은에 대해서는 SOx, NOx, 먼지와 더불어 배출규제를 시행할 계획을 가지고 있다. 수은배출 규제에 대비하여 미국의 정부산하 연구소와 기업들은 연소 배가스로부터 수은을 제거하기 위한 흡착제 분사, 수은 산화 등 여러 가지 저감기술에 대해 실험실 규모로부터 실증 규모까지 연구를 진행하고 있다. (중략)