• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.6
• /
• pp.474-481
• /
• 2008

수소 기관에서 역화없이 고성능과 저$NO_x$를 실현시키기 위하여 밸브 타이밍 변화에 따른 흡기관 분사식 수소 기관의 성능을 파악하고 가솔린의 경우와 비교하였다. 그 결과 흡기밸브 타이밍은 역화억제와 성능향상에 큰 영향을 미치는 것을 확인하였다. 흡기밸브타이밍의 진각은 역화를 억제하며 효율과 출력을 동시에 향상된다. 비록 흡기밸브 타이밍 변화에 의해 NOx는 증가하지만, 희박영역인 출 ${\Phi}=0.5$에서 현저히 감소된다. 또한 열효율은 ${\Phi}=0.5$ 토크는 ${\Phi}=1.0$에서 가장 높게 나타난다. 흡기밸브 타이밍을 $ATDC20^{\circ}$에서 TDC로 변화시켰을 때, ${\Phi}=1.0$에서 토크는 약 28% 증가되고, ${\Phi}=0.5$에서 효율은 약 7%향상된다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.119-122
• /
• 2002

In general, Liquid Injection Thrust Vector Control(LITVC) is accomplished by injecting a liquid into the supersonic exhaust flow through holes in the wall of the propulsion nozzle. This injection flow field is highly complicated and detailed flow physics associated with the secondary flow injection should be known far the practical design and use of the LITVC system. The present study aims at understanding the LTTVC flow field and obtaining fundamental design parameters for LITVC. The experimentations were performed in a supersonic blow-down wind tunnel. Compressed, dry air was used for both the main exhaust and injection flows but the pressures of these two flows were controlled independently. The location of the injection holes was changed and the pressures of the two streams were also changed between 2.0 and 15.0 bar. The effectiveness of LITVC was discussed in details using the results of the pressure measurements and flow visualizations

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.491-498
• /
• 2010

Humidification of PEM fuel cells is necessary for enhancing their performance and lifetime. In this study, a humidification system was designed and tested; the system includes an air-supply tube (inner diameter: 75 mm) through which a nozzle can be directly inserted and a cyclonic separator for the removal of water droplets. Three types of nozzles were employed to study the influence of injection pressure, air flow rate, and spray direction on the humidification performance. To evaluate the humidification performance, the concept of humidification efficiency was defined. In the absence of an external heat source, latent heat for evaporation will be supplied by the own enthalpies of water and air. Thus, the amount of water sprayed from the nozzle is the most critical factor affecting the humidification efficiency. Water droplets were efficiently removed by a cyclonic separator, but re-entrainment occurred at high air flow rates. The absolute humidity and humidification efficiency were $21.29\;kJ/kg_{da}$ and 86.57%, respectively, under the following conditions: nozzle type PJ24; spray direction angle $90^{\circ}$; injection pressure 1200 kPa; air flow rate 6000 Nlpm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.472-484
• /
• 2002

To analyze the characteristics of air flow and $CO_2$ extinguishant transfer when extinguishant is injected into a closed space similar to marine engine room, a numerical simulation on a space was performed. Flow fields and $CO_2$ concentration fields are calculated according with the variation of the location & injection angle of nozzles. The results of simulation showed that the pattern of recirculation flow was affected greatly with the location & injection angle of nozzles and such a recirculation flow accelerated mass transfer of $CO_2$ and greatly affected the diffusion process of $CO_2$ extinguishant. It is considered that this result of this study can be useful to designing the arrangement of nozzles for the $CO_2$ fire fighting equipments in a marine engine room.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1206-1207
• /
• 2011

하이브리드 발전시스템에서 전압과 주파수제어는 서로 다른 분산전원의 동기화 및 전력제어에 있어서 매우 중요하다. 본 논문에서는 디젤 발전 시스템에서 연료 분사량을 제어하여 주파수를 담당하는 Governor 제어기에 대한 제어 알고리즘을 개발하여 적용함으로써, 연료분사량을 최적화하여 일정한 속도제어를 하고자 한다. 이는 기본 제어기 알고리즘에 전력에 대한 전류 지령치를 첨가함으로서 제어기의 속응성 및 안정도를 개선할 수 있다. 또한 기존 디젤발전기의 부하에 따른 전압 및 주파수 특성을 분석하고, 시뮬레이션 함으로서 본 알고리즘을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1244-1249
• /
• 2001

The characteristics of engine performance with fuel injection system in D.I. diesel engine were studied in this paper A fuel injection system has an important role in the performance and emission gas in a diesel engine. In this paper, an experimental study has been performed to verify the effect of the performance and the emission gas with the factors such as diameters of an injection nozz1e hole, diameters of an injection pipe and injection timing in the fuel injection system. The authors have obtained the results that optimizing the factors of fuel injection system is siginificant to enhance the performance of the engine system and consumption ratio of fuel, smoke, and NOx.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.65-71
• /
• 1999

Recently new engine system is being required to cope with intensive emission restriction . For this reason, GDI(Gasoline direct injection) engine system which can satisfy both as good fuel economy as diesel engine and the performance to surpass PFI gasoline engine is being development . Since fuel injection system plays a significant role in GDI engine performance, the investigation of the spray characteristics injected from GDI injector above all is indispensable for GDI system development. In this study , spray developing shape was visualized using laser sheet with Nd : YAG laser and atomization characteristics was analyzed by measuring velocities and droplet size with PDA. Utilizing these results , the basic design factor of GDI injector can be offered.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.14-15
• /
• 2002

기체역학 이론에 의하면, 노즐의 공급압력과 노즐의 상세형상이 주어지는 경우에 추진 노즐로부터 방출되는 제트유동의 추력을 예측할 수 있으며, 최대추력은 노즐 출구에서 유동이 적정팽창 상태로 될 때 얻어진다. 실제의 추진 로켓에서나 다른 비상체에서는 추력의 예측뿐만 아니라, 얻어지는 추력의 방향을 적절하게 조절하여 제어하는 것이 요구된다. 종래 추력벡터 제어를 위해서 많은 연구들이 수행되었다. 일례로 추진노즐 내부에 베인(vane) 등을 삽입하여, 추력벡터를 조절하거나, 추진 노즐을 가변(movable nozzle)으로 하는 방법, 그리고 노즐내부에 2차 유동을 분사(secondary flow injection)하여 평균 추력벡터를 제어하는 방법 등이 제안되어 응용되어 왔다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.28-28
• /
• 1998

단일 충돌제트의 경우 충돌면에서의 열전달 효과는 제트 출구와 충돌면 사이의 간격, 노즐 형상에 따른 제트출구의 초기조건, Re$_{D}$수 변화와 충돌면의 형상이나 표면거칠기 등에 따라 변화하게 된다. 그러나 수직 충돌제트의 경우 정체영역에서의 국소적인 열전달 향상은 용이하나 반경 방향으로 열전달이 점차 감소하게 된다. 따라서 충돌면의 전반적인 열전달 향상을 위해서는 열전달이 정체점보다 상대적으로 낮은 영역에서 열전달 향상이 필요하다. 또한, 실제 적용시 충돌면의 형상이나 협소한 공간에서 노즐위치의 제약으로 인하여 충돌제트가 수직으로 분사되는 경우보다 경사진 제트가 더욱 많이 응용된다. 더욱이, 수직충돌제트가 사용되는 많은 상황에서도 주위의 다른 공기 흐름의 영향으로 인하여 실제 제트가 경사각을 갖고 분사되어진다 이러한 경사충돌제트의 중요성에도 불구하고 경사충돌제트에 대한 연구는 수직충돌제트에 대한 연구보다 상대적으로 적게 이루어져 왔다.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.6
• /
• pp.115-122
• /
• 2014

The optimal design of the flow distributor is very important to ensure the structural integrity of the reactor system and their safe operation during some transient or accident conditions. In the present study, we numerically investigated the performance of a flow distributor in tank with different shape factors such as the total number of the holes, the pitch-to-hole diameter ratios (p/d), the diameter of the hole and the area ratios. These data will contribute to a design of the flow distributor.