• Journal for History of Mathematics
• /
• v.19 no.4
• /
• pp.97-106
• /
• 2006

The lattice originated from logic, not mathematics. Around 1880, Peirce thought that all the lattices were distributives, however $Schr{\"{o}}der$ corrected the error around 1890. In 1993, Birkhoff used the term lattice for the first time that had a different meaning from today's lattice. This paper introduces Peirce, and studies correlation among atomic lattices, atomistic lattices, J-lattices, strong lattices and distributive lattices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.241-246
• /
• 2021

In this paper, hydrogenated amorphous silicon(a-Si:H) grating coupler with distributed Bragg reflector(DBR) is proposed to achieve high-efficiency nanophotonic radiator for Light Detection and Ranging(LiDAR) application. The DBR reduces downward leakage of the optical field below the grating region. As a result, the far-field intensity shows about 1.4 times stronger, compared to the common grating coupler without the DBR.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.210-210
• /
• 2021

Delft Dashboard는 유동모델을 위한 오픈소스 프로그램으로 로컬 및 글로벌 데이터 세트를 사용하여 다수의 입력 매개변수를 신속하게 생성, 편집하고 모델 내 입력을 시각화하도록 설계된 그래픽 사용자 인터페이스(GUI) 이다. 특히 Delft Dashboard에 제공하는 개방경계조건을 이용하면 격자영역을 인식하여 개방경계를 자동으로 분배 및 지정하고, 각 개방경계 위치에서 분조별 조석조화상수 값도 산출되므로 유동 모델의 편의성을 증대시킬 수 있지만 상황에 따라 적합하게 경계를 분배하여 개방경계로 지정하는 것이 중요하다. 본 연구에서는 Delft Dashboard에서 제공하는 개방경계조건 중 TPXO 8.0을 이용한 Delft-3D 해수유동 수치모의를 수행하여 개방경계조건이 결과에 미치는 영향을 분석하였다. TPXO 8.0의 경우 격자영역에서 개방경계조건을 설정할 때 사용자가 경계조건에 포함될 격자 수를 지정하면 전체 격자경계에서 격자 수에 해당하는 만큼 경계를 나누어 개방경계를 지정하고 각 개방경계 위치에서의 분조별 조석조화상수값을 산출한다. 특히 격자 수에 따라 개방경계로 지정되는 정도에 따른 영향을 분석하기 위하여 인위적으로 경계를 다양하게 분배하여 개방경계를 지정한 후 수치모의에 적용하였다. 수치모의는 동해안 고리원전 인근을 대상으로 격자 생성 후 Delft Dashboard TPXO 8.0을 이용하여 전술된대로 다양한 개방경계조건을 생성하였고 이를 Delft-3D내 적용하여 해수유동 모의를 수행하였다. 각 개방경계 조건별 초기 수면 변위 분석 및 인근 조위관측소의 관측값의 비교를 통해 개방경계조건이 모의결과에 미치는 영향을 분석하였다.

• Journal of Korea Water Resources Association
• /
• v.34 no.3
• /
• pp.241-251
• /
• 2001

A flow determination algorithm is proposed for the distributed hydrologic model. The advantages of a single flow direction scheme and multiple flow direction schemes are selectively considered to address the drawbacks of existing algorithms. A spatially varied flow apportioning factor is introduced in order to accommodate the accumulated area from upslope cells. The channel initiation threshold area(CIT) concept is expanded and integrated into the spatially distributed flow apportioning algorithm in order to delineate a realistic channel network. An application of a field example suggests that the linearly distributed flow apportioning scheme provides some advantages over existing approaches, such as the relaxation of over-dissipation problems near channel cells, the connectivity feature of river cells, the continuity of saturated areas and the negligence of the optimization of few parameters in existing algorithms. The effects of grid sizes are explored spatially as well as statistically.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.345-358
• /
• 2002

The flow apportioning algorithms with digital elevation models have been developed to reflect reasonable flow divergence properties but they showed several defects related to the connectivity of channel cells, various divergence features along to local topography and channel cells' size etc. Topographic data used by existing flow apportioning algorithms are flow accumulation area and local slope. However, the size and location of channel cells which play the dominant role in the flow pathway were not properly considered. Therefore, a new flow apportioning algorithm considering various flow divergence characteristics in the complicate terrain is proposed. The GA optimization scheme is used to represent the location and scale of the channel pixel. Improved result can be obtained by using both a new flow apportioning algorithm and optimization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.311-317
• /
• 2019

We first numerically analyzed the characteristics of a silicon-based grating structure for beam steering. The analysis includes the basic principle of the grating structure according to the wavelength, peak radiation angle, radiation efficiency, and full-width at the half maximum(FWHM) of the radiation angle. Based on the analysis, we propose a silicon-based grating structure integrated with distributed Bragg reflector(DBR) to obtain a high radiation efficiency and narrow beam width simultaneously. We performed the numerical optimization of the radiation efficiency and FWHM of the radiation angle according to the DBR position. By the design optimization using the proposed grating structure compatible with the complementary metal-oxide semiconductor(CMOS) process, we achieved a maximum radiation efficiency of 87.1% and minimum FWHM of radiation angle of $4.68^{\circ}$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.78-79
• /
• 2000

재구성이 가능한 광 크로스-커넥트(optical cross connect)는 전광 네트워크를 구성하기 위한 핵심소자 중의 하나이다. 일반적인 구조의 파장분배기는 공간분할 스위치(space division switch)를 두 쌍의 파장 다중화기(multiplexer)와 역다중화기(demultiplexer)의 가운데에 삽입하여 구현된다$^{(1)}$ . 최근에, 광섬유 브래그 격자와 광스위치 쌍을 직렬 연결하여 재구성이 가능한 광 크로스-커넥트가 제안되었다$^{(2)}$ . 그러나, 이 구조는 광신호에 따라 광섬유 브래그 격자에 반사되면서 겪는 광스위치에 의한 삽입손실이 다르다는 문제점이 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 한 쌍의 파장 다중화기/역다중화기와 파장가변 광섬유 브래그 격자를 이용한 새로운 구조의 광 크로스-커넥트를 제안하고자 한다. 또한, 제안된 구조는 일반적인 구조의 파장분배기에 비해 파장 다중화기/역다중화기의 개수를 반으로 줄일 수 있는 장점이 있다. (중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1021-1030
• /
• 2017

This paper describes the algorithm of computing thermal contact conductance between unmatched grid interfaces for finite element thermal analysis. Because grid interfaces should be coincident with adjacent meshes for finite element method, large amount of man hours and huge computations are required to match interfaces between many numbers of complex subdomains. A novel method that distributes feasibly the conductances to interface nodes is proposed. The aims of the method are described, and details of the nodal conductance distribution algorithm with less dependency on meshes are represented. The algorithm can be applied both the flat and curved interfaces in 3 dimensional space, and proposed method can combined with many finite element application including thermal analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.86-91
• /
• 2010

We constructed a quasi-distributed fiber-optic sensor network for the safety monitoring in power systems. It is possible to construct many of FBG sensors in a line and to be immune from electromagnetic noise. For demodulation analysis of reflected wavelength from FBG sensor, we proposed a simple and fast system using a InGaAs photo-diode array and a holographic diffraction grating. For accuracy improvement of the proposed demodulation system, we applied a Gaussian line-fitting algorithm. We obtained about 4[pm] of wavelength resolution and stability.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.422-428
• /
• 2011

This paper presents results from the theoretical analysis of the lateral load distribution for a railway bridge designed with PSC girders which is one of most popular types of bridge in Korea. Typically, 3 sets of intermediate cross beams within a span have been installed for lateral load distribution. In this paper, the effect on the lateral load distribution by the number of intermediate cross beams were examined by both simple grillage analysis and finite element method. This study showed that at least, one set of cross beams at midspan should be needed to ensure the proper load distribution. However, the effect of cross beams on the load distribution becomes not significant though more than one set of cross beams are installed. Therefore, only one set of cross beans at midspan is recommended for constructibility and economic efficiency.