• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.57-63
• /
• 2007

The oxidizer-rich preburner is applied to the high efficiency closed cycle rocket propulsion system. This system is generally operated on oxidizer-fuel mixture ratio over than 50. The spray quality and mixing performance are very important for stable combustion of this preburner. This paper presents basic design concept and spray characteristic of the oxidizer-rich preburner injector and this result could be applied to the development of the oxidizer rich preburner system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.9-17
• /
• 2006

The influences of recess length of a liquid/liquid swirl coaxial injector on spray characteristics were investigated. It was revealed that the internal impinging phenomenon played an important role in the spray characteristics, such as spray angle and breakup length. Also, as the recess length increased, the mean drop size increased due to the increase of effective film thickness and mixing efficiency increased, but in the case of very deep recess length, the mixing efficiency decreased.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.85-88
• /
• 2010

It is essential to understand the spray characteristics of injectors for the development of liquid rocket engine systems. In this study, the image processing methods for the measurement of the spray characteristics such as spray angle, breakup length and drop size of Gas-Centered Swirl Coaxial(GCSC) injectors have been investigated. The charge-coupled device (CCD) camera with a stroboscope was used to capture the spray images. It is to be hoped that this methods could contribute to acquisition of reliable and worthwhile data for the design of injectors. Moreover, this image processing method will be verified by comparison with other experimental results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.28-28
• /
• 2000

가스터빈 연소기의 역방향 이중 스월러의 두 번째 벤츄리 끝단 각도의 변이가 연소실내의 유동 특성에 미치는 영향에 대해 알아보았다. 벤츄리 끝단 각도가 수렴형, 직선형, 발산형의 세 형상에 대해 연료 분무가 없는 경우, 연료 분무는 있으나 연소는 없는 경우, 연소가 일어나는 경우에 대해 수치적 방법으로 연소실 내의 유동 특성에 대해 고찰하였다. 연료의 분무는 분무된 액적들이 갖는 운동량이 유입되는 공기의 운동량에 비해 적으므로 분무에 의한 유동 특성의 변화는 무시할 수 있는 반면 연소가 일어날 때는 유동 특성이 판이하게 달라짐을 확인할 수 있었다. 가스터빈 연소실 내의 유동 특성은 벤츄리 끝단 각의 변이에 따라 민감하게 변하고 있다.

• Journal of the KSME
• /
• v.25 no.1
• /
• pp.32-38
• /
• 1985

지금까지의 계산된 직접 분사식 디이젤기관에서의 분무유동 현상은 실린더내에서의 공기유동과 공기밀도의 온도에 대한 변화를 고려하지 않은 경우이다. 디이젤 연소의 모델링을 위한 몇가지 단계, 즉 (1) 연소실내에서 공기유동을 무시한 경우의 분무유동 특성 (2) 공기유동 (swirl, squish, turbulence)을 고려한 경우에서의 분무유동 특성 (3) 연소실내에서의 분무제트와 주위 기체사이에의 열 및 질량의 이동현상 (4) 연소실 벽면과 연소가스 사이에의 열역학적 관계 의 4가지 단계중 제 1단계에 해당하는 모델로써 보다 완벽한 가정과 정확한 입력 데이터를 이용하면 좋은 예측결과를 나타낼 수 있는 자료가 될 수 있겠으며 공기유동을 고려한 경우의 분무유동 또한 프로그램이 거의 완성단계에 있으므로 가까운 시일내에 이용할 수 있으리라 믿는다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2005-2010
• /
• 2011

Since recently exhaust gas regulation for a non-road small engine as well as commercial vehicle engine has been enforced, a carburettor of a small engine should be replaced by an electronic fuel injection system. In this study, the spray characteristics of the 400cc gasoline small engine injector has been experimentally analyzed. Based on the experimental results, suitable injector for the small engine has been selected. Through the test rig measuring spray mass distribution, fuel distribution characteristics of 3 hole- and 6 hole-injector has been analyzed. Through the visualization equipment, injector spray angle, penetration length and spray width have been measured and analyzed. Considering spray characteristics and stability, 6 hole-injector is selected for the 400cc gasoline small engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.51-56
• /
• 2010

An experimental study was performed to understand spray characteristics of the V type rotating fuel nozzle with orifice diameters by using high speed rotational system. The experimental apparatus consist of a high speed rotational system, fuel injection system and acrylic case. The droplet size and velocity were measured by PDPA(Phase Doppler Particle Analyzer) and spray was visualized by using Nd-Yag laser-based flash photography. From the test results, droplet size is reduced with increasing orifice diameter up to the critical value. When increasing orifice diameter over than this critical value, droplet size is not decreased with increasing the orifice diameter. This is due to the irregular distribution of the liquid sheet around the inner surface of injection orifice.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.258-263
• /
• 2010

An experimental study was performed to understand spray characteristics of the V type rotating fuel nozzle with orifice diameters by using high speed rotational system. The experimental apparatus consist of a high speed rotational system, fuel injection system and acrylic case. The droplet size and velocity were measured by PDPA(Phase Doppler Particle Analyzer) and spray was visualized by using Nd-Yag laser-based flash photography. From the test results, droplet diameters are reduced with increasing orifice diameter and the optimum injection orifice diameter is 2.6 mm. When increasing orifice diameter over than 2.6 mm, droplet diameter is not decreased with increasing orifice diameter. This is due to the irregular distribution of the liquid sheet around the inner surface of injection orifice.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2147-2159
• /
• 1991

The effects of principal dimensions of internal mixing twin-fluid atomized and operating conditions on the atomizing characteristics are experimentally investigated. The tests are conducted over the wide range of air/liquid ratio to predict influences of the diameter and length of nozzle, contacting angle between air and liquid in the mixing chamber, and air orifice diameter on the mean drop size(SMD), spray angle, distribution of drop size, and spray dispersion, And also, initial distribution of liquid column by air stream within the mixing chamber are observed through the transparent nozzles. A He-Ne laser particle sizer(MALVERN Model 2604) was used to measure the Sauter.s mean diameter( $D_{321}$) and droplet sizes distribution. In this experiment the air/liquid ratio, mixing length and nozzle diameter have a great influence on SMD, spray angle, droplet sizes distribution and spray dispersion.

• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.12-21
• /
• 2000