• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.98-103
• /
• 1996

석탄가스화복합발전소내 공기분리장치와 연계된 가스터빈 공기압축기의 성능병화를 예측할 수 있는 해석방법을 제안하였다. 공기분리장치와 연계된 가스터빈용 공기압축기의 성능변화는 유선곡률방법과 압력손실모델을 결합한 해석방법을 사용하였으며, 예측결과들을 실제 압축기성능 시험 결과와 비교하여 예측정확도를 검증하였다. 제안된 압축기성능 해석방법을 근간으로, 압축기와 공기분리장치의 연계조건인 열교환기의 핀치포인트 온도차, 추출공기량 및 추출 공기압력이 압축기 성능변화에 미치는 영향을 정량적으로 예측하였다. 공기추출량이 늘어나거나 핀치포인트 온도차가 커질수록, 압축기의 압축비 및 소요동력은 증가하나, 압축기 효율은 공기추출량의 증가에 따라 고압공기추출시에는 저하되고, 저압공기추출시에는 향상되었다. 더 나아가, 압축기의 일반화된 성능특성곡선의 제시를 통해, 압축기 효율을 극대화 할 수 있는 압축기/공기분리장치 간 연계조건의 최적화를 시도하였다.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.160-169
• /
• 1996

Parametric studies are conducted for optimizing the integration design between gas turbine compressor and air separation unit (ASU) of integrated gasification combined cycle power plant. The present study adopts the ASU of double-distillation column process, from which integration conditions with compressor such as the heat exchanger condition between air and nitrogen, the amount and the pressure of extracted air are defined and mathematically formulated. The performance variations of the compressor integrated with ASU are analyzed by combining streamline curvature method and pressure loss models, and the predicted results are compared with the performance test results of actual compressors to verify the prediction accuracy. Using the present performance prediction method, the effects of pinch-point temperature difference (PTD) in the heat exchanger, the amount and the pressure of extracted air on compressor performances are quantitatively examined. As the extraction air amount or the PTD is increased, the pressure ratio and the power consumption of compressor are increased. The compressor efficiency deteriorates as the increase of the flow rate of air extracted at higher pressure level while improving at lower pressure air extraction. Furthermore, through the characteristic curve between generalized inlet condition and efficiency of compressor, optimal integration condition is presented to maximize the compressor efficiency.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.53-56
• /
• 2009

최근 HD 방송의 실현과 함께 HDTV가 빠르게 상용화되면서 고화질 비디오를 더 효율적으로 압축하기 위한 기술 개발이 활발하게 진행되고 있다. 최신 표준 비디오 압축 방식인 H.264/AVC에서는 고정 6탭 필터를 사용하여 참조 영상을 보간하고 움직임 예측을 수행하는데, 이의 압축 효율을 향상시키기 위하여 고정 필터를 개선한 비분리 적응형 보간 필터가 개발되었다. 하지만 비분리 적응형 보간 필터는 압축률뿐만 아니라 계산량도 증가하는 단점이 있기 때문에 2차원 필터를 1차원 필터의 연결로 모델링 한 분리 적응형 보간 필터가 개발되었고, 그 결과 압축률은 비슷하게 유지하면서 계산량을 훨씬 줄일 수 있게 되었다. 분리 적응형 보간 필터는 1차원 필터 모델링을 할 때, 수평방향의 필터링 수행 후 수직방향 필터링을 하기 때문에 이를 통해 만들어진 보간 영상은 원 영상의 수평방향에 대한 특성을 더 많이 반영하게 된다. 따라서 수직방향으로 더 높은 주파수 특성을 갖는 영상의 경우에는 효율이 떨어지게 된다. 이를 고려하여 본 논문에서는 영상의 수직방향 주파수 특성을 더 많이 반영할 수 있는 보간 필터를 추가함으로써 영상의 주파수 특성에 따라 보간 필터를 적응적으로 선택하는 향상된 분리 적응형 보간 필터를 제안한다. 제안한 알고리즘을 이용할 경우 기존의 분리 적응형 보간 필터에 비해 움직임 예측 및 보상이 더 정확하게 이뤄질 수 있으며, 부호화 효율이 향상됨을 확인할 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1187-1190
• /
• 2022

최근 홀로그램(Hologram)을 광학현미경(light microscopy)에 적용하여 시료의 두께를 측정하는 방식의 연구가 활발하게 진행되고 있다. 빛의 간섭패턴(Interference pattern)을 사용하여 시료의 두께를 측정할 수 있는 이유는 시료의 두께에 따라 빛의 위상(phase)이 달라지기 때문이다. 빛의 간섭패턴을 저장하는 홀로그램에서 위상만을 분리한 후 위상을 unwrapping 하면 물체의 두께를 측정할 수 있다. JPEG은 기존의 연구방식인 시료를 통과한 홀로그램 이미지를 직접 압축하는 object 압축방식을 사용한다. 하지만 본 논문에서는 object 압축방식과 달리 홀로그램 이미지를 직접 압축하지 않고 홀로그램 이미지에서 시료의 위상(phase)만을 분리하여 위상 도메인에서 압축하는 방식을 취하였다. 이를 통해 object 압축방식에 비해 위상 도메인 압축방식에서 모든 데이터셋에 대하여 평균적으로 0.0003~0.0142 radian의 성능향상을 이룰 수 있었다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.3
• /
• pp.243-250
• /
• 2004

We describe a practical implementation of DVR (Digital Video Recording) system. And we propose a new image compression algorithm, that input video signal is divided into two parts, a moving target and a non-moving background part to achieve efficient compression of image sequences. This algorithm reorganizes a target area and a back-ground area by use of Macro Block(MB) unit on encoding scheme. The proposed algorithm allows high quality image reconstruction at low bit rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2693-2700
• /
• 2009

This paper proposes an effective compression method to utilize the 3D integral image with large amount of data obtained by a lens array in various applications. The conventional compression methods for still images exhibit low performance in terms of coding efficiency and visual quality, since they cannot remove the correlation between elemental images. In the moving picture compression methods, 1D scanning techniques that produce a sequence of elemental images are not enough to remove the directional correlation between elemental images. The proposed method effectively sequences the elemental images from an integral image by the 2D referencing technique and compresses them using the multi-frame referencing of H.264/AVC. The proposed 2D referencing technique selects the optimal reference image according to vertical, horizontal, and diagonal correlation between elemental images. Experimental results show that compression with the sequence of elemental images presents better coding efficiency than that of still image compression. Moreover, the proposed 2D referencing technique is superior to the 1D scanning methods in terms of the objective performance and visual quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.961-967
• /
• 2009

In this paper, the lossless compression method is proposed for an 8-bit bitplane of the input image. The lower bitplanes are not well compressed because of irregularity of pixels. To overcome these drawbacks, this paper propose a mixed coding method that using the block-based lossless compression and the bit-based losselss compression, introducing the H. 264 and the JBIG. First, to take advantage of the characteristics of the bitplanes, 8-bitplane against the top 4 bits and lower 4 bits were separated. Next, the JBIG compression method was used in separated top 4-bitplane because of a lot of correlation between bits. And a separated lower 4-bitplane was applied the improved method that using the H. 264 lossless prediction. A pre-processing method applied to the lower 4-bitplane then irregular distribution of pixel values are converted to regular. Using the proposed method to test for various test images were performed. Experimental results from a printer using 8-bit image compared to JBIG average 19%, lower 4bit image compression performance with an average of 11% could be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.842-846
• /
• 2016

It's possible for a human to breathe under water, but the amount of dissolved oxygen in the water is small and a large amount of water is necessary to obtain sufficient dissolved oxygen from water. So, large separation system with large water pumps, having large surface areas, and large battery sources are needed. Exhalation gases are used to solve this problem. Theses gases contain some oxygen, nitrogen, and carbon dioxide; they contain less oxygen and more carbon dioxide compared to air. Therefore, reduction of the amount of carbon dioxide is necessary. If exhalation gases are employed appropriately, the separation device can be made more compact. Inlet water mixed with exhalation gases is supplied into the separation device, and dissolved gases are separated from the mixed water as it passes through the device. The inlet part of a typical separation system with a water delivery pump before the membrane module has more than one atmosphere. Hence, a compressor is used to mix the exhalation gases. In this study, the pressure at the inlet due to the use of a suction pump after the membrane module was less than one atmosphere; hence, compressors were not required. Separation characteristics were studied using a separation device without a compressor. The use of exhalation gases led to an increase in the amount of dissolved gases being separated. As the amount of inlet exhalation gases was increased, the separation of dissolved gases was increased as well.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.267-274
• /
• 2005

Preparation of cellulose type underwater non-segregation admixture was attempted and the hardening characteristics of underwater concrete according to the addition of this admixture was investigated in order to make underwater concrete with the compressive strength ratio of 0.8 to that of concrete manufactured in common atmosphere. The proposed underwater non-segregation admixture consisted of methyl cellulose of 0.4% by weight, silicon type antifoaming agent of 20% by weight, and sodium aluminate of 0.1% by weight to the amount of cement as setting accelerant, respectively. As the proposed non-segregation admixture was increased, the amount of suspended solid decreased, air content in concrete was increased but the flow loses by elapsed time did not change. The proper amount added of the proposed non-segregation adimixture was 0.8 wt% to the amount of cement. The compressive strength of the test sample underwater concrete manufactured by the addition of the proposed admixture was $325Kg/cm^3$, and the ratio of compressive strength of this sample concrete to that of a concrete manufactured in air was 0.94.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.468-478
• /
• 2002

고품질의 영상 압축기인 JPEG2000의 기본 압축 코덱인 EBCOT(Embedded Block Coding With Optimized Truncation)를 설계하였다. 영상 압축기에서 Context 추출 구현을 위하여 코드블록(Code block)으로 분할하고, 비트플랜(Bit-Plane)코딩을 했으며, 3가지 패스 그룹으로 분리한 후 ZC, RLC, MR, SC를 하였다. 산술부호화는 덧셈 연산과 쉬프트 연산만을 사용하는 MQ-coder를 사용하였으며, Context들의 누적 확률을 추정하여 테이블을 작성하였고, 압축데이터를 산출하였다. 영상 압축을 위한 엔트로피 코더의 하드웨어 구현은 VHDL를 이용하여 설계를 하고, Synopsys사의 논리 회로 합성 도구를 사용하여 합성을 하였으며, Altera사의 FLEX 10K250 Device를 이용하여 FPGA로 구현하였다.