• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.344-347
• /
• 2000

In this paper, a redesign of computer case is proposed by applying some guide lines of assembly and disassembly to an existing computer case. Some problems such as increase of number of disassembly and vibration, difficult assembly and disassembly from unfittable covers are recognized through analysis of geometrical structure and practical assembly and disassembly. A solution of these problems is proposed through ideas of ease of assembly and disassembly. Design for Environment Software is used to evaluate both redesigned and existing products. Time of assembly and disassembly and MET-point are especially calculated by the software, and these data give us a good guide for analysis of ease of assembly, ease of disassembly and environmental influence in both products.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.608-615
• /
• 2002

In recent years, Pressure to recycle has stemmed from environmental and economic reasons. This paper examines a new methodology that can estimate the disassemblability considering the recycling. Easy of disassembly estimation method outlined here is shown to provide one of several needed metrics for use during product design. This study suggests five main determining factors-fixing, grasping, access, disassembly and handling-as the five determining factors and determined to evaluate disassemblability. The evaluation based on disassemblability is demonstrated on an automobile parts example.

• Membrane Journal
• /
• v.31 no.2
• /
• pp.145-152
• /
• 2021

While there are increasing demands on biomolecules separation, resin chromatography lacks in terms of throughput and membrane chromatography is an alternative with high binding capacity and enhanced mass transfer properties. Unlike typical membrane processing, where the performance can only be empirically assessed, understanding how mechanisms work in membrane chromatography is decisive to design biospecific processing. This short review covers three separation mechanisms, including affinity interaction modes for selectively capturing bulk molecules using biospecific sites, ion exchange modes for binding biomolecules using net charges and hydrophobic interaction modes for binding targeted, hydrophobic species. The parameters in designing membrane chromatography that should be considered operation-wise or material-wise, are also further detailed in this paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.73-79
• /
• 1968

The resolving capacities of xanthophyll pigments on thin-layers of Silica Gel, Hyflo super-Cel, and Micro-Cel C with varying concentrations of acetone in petroleum ether as the developing solvent were compared. The results showed that the resolving capacity of Micro-Cel C thin-layer was superior to others and satisfactory for the separation of leaf carotenoids in clearly separated six bands; carotenes, lutein-zeaxanthin, antheraxanthin, violaxanthin, an unidentified band, and neoxanthin, when it was developed with $13\%$ acetone-petroleum ether solution for 15 to 20minutes in an unsaturated chamber. Adhension of Micro-Cel C to glass was adequate without binder. Calcium sulfate used as a binder appeared to inactivate the resolving capacity of Micro-Cel C. Removing an about 0.2cm-wide layer on bo side of thin-layer slide helped to prevent 'edge effect' which gave tailing and faster solvent ascending along the side than the center. An adequate thickness of thin-layer was obtained when a 3 ml aliquot of the suspension in which l0g powdered Micro-Cel C was suspended in 75 ml distilled water was coated on a $2\times20cm$ glass slide.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.15-20
• /
• 1991

The paper considers a distributed adaptive control technique for industrial robots which contribute to the factory automation. The control object is to tracking for a desired trajectories under various load conditions., rapidly against load variation these control techniques divided whole system into subsystems which is controlled with the nominal and adaptation controllers, and also the asymptotic stability of these substem was proved. Simulation results shown that the proposed techniques was feasible in spite of nonlinear dynamics of robot manipulator and payload variations.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.1
• /
• pp.69-73
• /
• 2001

For developing the cryogenic air separation unit, it requires some technology such as basic process design. equipment design and manufacturing based on the cryogenic physical properties and separation theory. In this study, we developed a process and equipment for producing high purity nitrogen which has the production capacity of 1600N㎥/h under 1 ppm $O_2$ and $H_2O$. Also we found that the number of theoretical plate(NTP) of distillation column was 44 and maximum nitrogen recovery ration of this process was 42% from the process simulation. The performance test was also carried out for the nitrogen recovery ratio and equipment efficiency. The results showed that the optimum nitrogen recovery was 41% and the maximum equipment efficiency was attained.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.54-55
• /
• 2003

지금까지 반도체 장비 부품 세정을 위한 기존의 세정 방법중 가장 널리 사용되는 화학적 세정 방법은 다량의 유해 화학물질의 발생 및 후처리 문제, 비용문제, 열악한 작업 환경등과 같은 많은 문제를 노출시키고 있다. 이에 최근의 기술은 습식 세정에서 건식세정 방식으로의 기술 전이가 빠르게 이루어지고 있으며, 특히 레이저 광에 의한 건식 세정 기술은 다양한 오염 물질을 하나의 레이저 광원으로 제거할수 있으며, 기존의 습식 방법과 비교해 환경 친화적 청정 기술이고, 다른 건식 세정 기술인 드라이 아이스 및 플라즈마 세정 방법과 비교해 이동용으로 제작이 가능해 반도체 및 평판 디스플레이 생산공정에서 부품을 분리하지 않고 쉽게 세정을 하기 때문에 반도체 생산 현장에서 in-situ 세정으로 시간적, 경제적 이점이 대단히 크다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.242-247
• /
• 2002

가. 느타리버섯 폐면 버섯퇴비를 종균과 혼합 입상하는 폐면입상기의 주요부위는 진동식 변량공급장치, 버킷엘리베이터 승강기, 승강식 수평 벨트콘베이어 수평이송장치로 구성되며, 통로가 좁은 생육분리형 재배사와 재래식 재배사에도 적응할 수 있도록 제작되었다. 나. 폐면 공급장치의 폐면 공급성능은 캠행정이 13mm로부터 16mm, 19mm로 커 질수록, 캠축의 회전수가 300rpm에서 700rpm으로 증가할수록 폐면의 공급성능은 높아지는 경향이었다. 다. 폐면 공급장치의 공급성능과 기체진동, 폐면 부착수준 등의 작업상태를 고려할 때 캠행정 16mm 회전수 550rpm 내외가 적당한 것으로 판단된다. 라. 시작기의 작업능률은 표준규격 200m$^3$인 버섯재배사 1동 1회당 14시간으로 관행(인력)작업의 50시간에 비해 3.5배 능률적이었다. 마. 버섯입상, 종균접종 작업경비는 1동 1회당 관행(인력)작업이 320,800원/200m$^3$.동에 비해 시작기는 130,300원/200m$^3$.동으로서 59,7%의 작업경비를 절감할 수 있는 것으로 분석되었다.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.174-180
• /
• 1999

An actinomycetes strain No.4 which produce the cholesterol oxidase(EC 1.1.3.6), was isolated from soil and identified as Streptomyces sp. based on taxonomic studies. The conditions of cholesterol oxidase production and enzymatic properties were investigated. The optimum composition of medium for production of the enzyme was 1% soluble starch, 2% corn steep liquor, 0.1% $KH_2PO_4$, 0.1% $NaNO_3$ and 0.05% $MgSO_4$ (pH 7.0). The optimum pH and temperature of the cholesterol oxidase were pH 6.0~7.5 and $37^{\circ}C$, respectively. The enzyme was stable in the range of pH 6.0~9.0. The isoelectric point determined by multichambered electrofocusing unit was in the range of pH 6.0~6.5.