• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.63-68
• /
• 1999

화석연료의 배기가스로부터 온실가스를 저감할 수 있는 기술은 아민 등의 용매를 사용하여 물리 및 화학적으로 제거하거나, 막분리 등을 통하여 분리하는 기술이 이미 상용화단계에 도달하고 있지만, 이러한 기술들은 이산화탄소의 분리를 위하여 많은 에너지를 필요로 하고, 시스템의 효율을 크게 저하시키는 단점들이 있는 것으로 나타나고 있다[1]. 본 연구에서는 발전시스템으로부터 이산화탄소를 분리할 수 있는 여러 개념들에 대한 시스템설계기술의 개발을 목적으로 수행되었다[2,3]. 첫 단계로서, 기존의 개념들에 대하여 보다 단순화되어 질 수 있는 이산화탄소를 고형화시켜 배기가스로부터 분리시키는 공정을 도입하는 경우에 대한 발전시스템의 성능분석을 수행하였다.(중략)

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.894-899
• /
• 2012

In recent years, recycling process has come to be necessary for separating metals, glass fibers and polymer from WPCBs (waste printed circuit boards) due to an increasing amount of electronic device waste. In this study, dimethylformamide (DMF) and attrition mill reactor were used to separate the component such as metals, glass fiber and epoxy resin from WPCBs. Separation of glass fiber from WPCBs was carried out under stirring rates 300~600 revolution per minute (rpm) for 1~2 h as the various agitator. The recycled glass fibers (RGF) were analyzed by thermogravimetric analyzer (TGA) for degree of separation of epoxy resin in the WPCBs. The degree of separation of epoxy resin of WPCBs increased in attrition mill agitator as a mechanochemical process for recycling WPCBs. The RGF separated in the WPCBs was applied as a reinforcement in the RGF/unsaturated polyester composites to reuse as a reinforcement.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.59-67
• /
• 2007

Recovery of acids from the waste etching solution of containing acetic, nitric and hydrofluoric acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. EHA(2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitric and hydrofluoric acid as a extraction agent was used to the experiment to obtain the process design data in separation procedure. From the experimental data and McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate each acid sequently from the mixed acids. The recovery yield was obtained above 90% for acetic acid from the acid mixtures, 90% for nitric acid from acetic acid extraction raffinate and then above 67% for hydrofluoric acid from final extraction raffinate.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.205-214
• /
• 2010

Many successive liquid-liquid extractions occur enabling purification of the crude material to occur. In high performance counter-current chromatography (HPCCC), crude material is partitioned between two immiscible layers of solvent phases. The stationary phase (SP) is retained by hydrodynamic force field effect and the mobile phase (MP) is pumped through the column. Purification occurs because of the different solubility of the components in the liquid mobile and stationary phases. There are many key benefits of liquid stationary phases such as high mass and volume injection loadings, total sample recovery, and easy scale-up. Many researchers showed that predictable scale-up from simple test is feasible with knowledge of the stationary phase retention for the planned process scale run. In this review we review the recent advances in HPCCC research and also describe the key applications such as natural products and synthetics (small or large molecules).

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.249-255
• /
• 1990

The conditions for separation and identification of anionic and nonionic surfactants by thin layer chromatography were investigated. Polyoxy alkylene-type nonionic surfactants were identified by the distribution of alkyl chain and alkylene oxide. Various polyoxyethylenated nonyl phenols were easily distinguished by densitometer. Some anionic surfactants were identified by $R_f$ and color, and the mixtures of anionic and nonionic surfactants were separated. Polyoxyethylenated fatty acid was separated into three parts of diester, monoester and polyethylene glycol, respectively, and the mixed ratio was determined by densitomer. All the experiments were carried out in 13-20 minutes, and the length of run was 80mm.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2000

Simultaneous separation and analysis of Ni(II), Pd(II), Co(II), Cu(II) and Hg(II) in peperidinedithiocarbamate (PDTC) chelates were investigated by reversed phase liquid chromatography. The optimum conditions for the separation of PDTC metal chelates were examined with respect to the pH, extraction solvent, and mobile phase strength on Novapak $C_{18}$ column using methanol/water mixture as mobile phase. All metal PDTC chelates were eluted in an acceptable range of capacity factor value ($0{\leq}log\;k^{\prime}{\leq}1$). The linear calibration curves were obtained in the concentration range of $0{\sim}1.2{\mu}g/mL$ for five metal ions, and also good precision in the range of 1.96~3.41% RSD was obseved. Under the optimum conditions, trace metat ions in the composite water sample were successfully separated and determined with relative error of ${\pm}2.0%$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.315-319
• /
• 2003

Bioactive organosulfur phytochemicals were isolated from fresh broccoli using methlylene chloride as an extract solvent and identified by GC/MSD analyses. Major organosulfur phytochemicals of broccoli extract were found to be isothiocyanates, which constitute 40.42% of total phytochemicals. The isothiocyanates from broccoli extract were identified to be 3-butenyl, 4-methyl thiobutyl, 4-methylthio-3-butenyl, 5-methylthiopentyl, 2-phenylethyl, 3-methyl sulfinyl propyl, and 4-methylsulfinylbutyl isothiocyanates, of which major isothio cyanates were 3 butenyl isothiocyanate and 4-methylsulfinylbutyl isothiocyanate, constituting about 38.55% of total isothiocyanates present in the solvent extract. Also, nitrites, corresponding to products from enzymatic hydrolysis of glucosinolates were identified as 4-methylthiobutyl, 5-methyl thiopentyl, 2-phenylethyl and 4-methylsulfinylbutyl nitrile. In addition, three sulfides were identified as dimethyl disulfide, dimethyl trisulfide and dimethyl tetrasulfide.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.726-731
• /
• 2001

To enhance the utilization of chestnut husk discarded in the processing company antioxidative activities and compounds were investigated. Antioxidative activities of solvent fractions from chestnut husk were examined by benzoic acid hydroxylation method ferric thiocyanate method and DPPH test. Ethyl acetate fraction showed strong antioxidative activities comparable to BHA. Active compounds were isolated and purified from ethyl acetate fraction by Sephadex LH-20 column chromatography and preparative HPLC. A major active compound gallic acid was identified by $^{1}$H and $^{13}$ C-NMR. The phenolic acid contents was analyzed by GC and ellagic acid (172.22 mg%) and gallic acid (107.39 mg%) were major phenolic acid of chestnut husk.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.401-406
• /
• 1999

Trace amount of cadmium was quantitatively extracted with 1% Aliquat 336-MIBK from 0.2M KSCN and 0.01M-HCl. Test tubes with a screw cap stopper were used for extraction in place of conventional separating funnels and organic solvents used were less dense than water. In this analysis, 22 times concentration effect was achieved with higher selectivity without interference. The detection limit of cadmium was 0.7ppb, therefore trace cadmium was easily analyzed by this method. The proposed method was applied to the determination of cadmium in blood serum and extraction mechanism was elucidated.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2011

Solvent extraction experiments were carried out to recover and separate Ru(III) from aqueous hydrochloric acid media using TBP and Cyanex923. The efficiency of the extraction was studied under various experimental conditions, such as concentration of HCl and NaCl, concentration of extractant in the organic phase and temperature. The extraction behavior of metal impurities, such as Pt, Bi, Sn, Fe, Pb and Cu in mixed solutions was examined. From the experimental studies, it was found that the Cyanex923 resulted in higher extraction percentage of Ru than TBP. However TBP was more effective for the separation of Ru and Pt, Bi, Sn in mixed solutions than Cyanex923.