• Korean Journal of Culture and Social Issue
• /
• v.17 no.1
• /
• pp.51-62
• /
• 2011

This study focused on the effects of median type on drivers' subjective sense of speed and the changes in this sense by driver age. Participants were 61 drivers: 20 young (aged 20-39 years), 19 middle-aged (40-59 years), and 22 older drivers (60+ years). The participants watched each of two driving scenarios, showing either a guardrail-equipped or a concrete median. The participants were asked to push a button when they perceived speeds of 60 km/h, 80 km/h, or 100 km/h. All drivers perceived higher speeds in the guardrail condition than in the concrete condition. Perceived speeds increased with driver age in both guardrail and concrete conditions. These results mean median type affects drivers' subjective sense of speed even as driver age increases, and that drivers' subjective sense of speed tends to increase with age.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.225-237
• /
• 1996

Intrinsic binding kinetics of of 125I-bovine serum albumin (125I-BSA) and immobilized monoclonal anti-BSA (MAb 9.1) were studied. Small non-porous polystyrene beads (0.5${\mu}$m diameter) were used as a solid support to minimize the mass transfer interference on rate measurements. We demonstrated both theoretically and experimentally that the binding reaction is kinetically controlled. Rate measurements show that the association reaction is of second order and the dissociation reaction is of first order. Between 4 and $37^{\circ}C$ the measured equilibrium constant agrees well with the equilibrium constant calculated from the rate measurements. The temperature effects on association are much greater than on dissociation; the activation energy for association is about 9Kca1/mole, as compared to 2Kca1/mole for dissociation. The use of small non-porous beads as a solid support in binding studies essentially avoids mass transfer limitations; such a system makes it possible to determine the intrinsic binding characteristics of any immobilized antibody on a solid surface.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.623-626
• /
• 2003

본 연구에서는 고정점 알고리즘의 독립성분분석과 원신호의 시간적 상관성을 고려한 견실 알고리즘의 독립성분분석을 혼합한 조합형 독립성분분석에 의한 혼합영상의 분리를 제안하였다. 여기서 고정점 알고리즘은 뉴우턴법의 경신규칙을 이용함으로써 빠른 분리속도와 우수한 분리성능을 가지며, 견실 알고리즘은 2차적 통계성의 일괄처리 알고리즘으로 시간적 상관성 및 낮은 kurtosis를 가진 영상분리에 효과적이다. 이들 기법들을 $512{\times}512$ 픽셀의 4개 영상으로부터 임의의 혼합행렬에 따라 발생되는 흔합영상의 분리에 적용한 결과, 우수한 분리성능과 빠른 분리속도가 있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.7-14
• /
• 2010

This paper describes the effects of kinetic parameters such as attaching speed, attaching time, and dettaching speed on printing property of electrodes which were fabricated by micro-contact printing with Ag ink. In inking process the attaching speed was preferable to be less than 1 mm/s, attaching time as short as possible, and detaching speed larger than 1000 mm/s in order to obtain the transfer ratio of ink larger than 98%. Meanwhile in printing process the parameters were totally opposite to the results of inking process; attaching speed larger than 100 mm/s, attaching time larger than 30 sec, and detaching speed less than 1 mm/s for the best results. With the parameters we could obtain the micro-contact printed electrodes with the minimum line width of $30\;{\mu}m$, thickness of 300~500 nm, roughness less than 50 nm, and resistivity of about $15{\sim}16{\mu\Omega\cdot}cm$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.627-630
• /
• 2003

본 연구에서는 고정점 알고리즘의 독립성분분석과 원 신호의 시간적 상관성을 고려한 견실 알고리즘의 독립성분분석을 각각 이용하여 혼합지문영상을 분리하였다. 여기서 고정점 알고리즘은 뉴우턴법의 경신규칙을 이용함으로써 빠른 분리속도를 가진다. 견실 알고리즘은 2차적 통계성의 일괄처리 알고리즘으로 시간적 상관성과 낮은 kurtosis를 가진 영상분리에 효과적이다. 이들 기법들을 $256{\times}256$ 픽셀의 8개 지문으로부터 임의의 혼합행렬에 따라 발생되는 지문의 분리에 적용한 결과, 견실 알고리즘이 고정점 알고리즘의 독립성분분석에 비해 우수한 분리성능과 빠른 분리속도가 있음을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.337-343
• /
• 2009

To apply to novel two-interconnected fluidized beds system for selective solid circulation, a solid separator and a solid circulation system were developed. The solid separation rate increased as the gas velocity through the solid injection nozzle, solid height, and diameter of solid injection nozzle increased. However, the effect of the fluidization velocity was negligible. Coarse($212{\sim}300{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 66 to 453 g/min. The solid circulation rate increased as the gas velocity through the solid injection nozzle, solid height, and the number of solid intake holes increased. However, the effect of the fluidization velocity was negligible. Fine particle was circulated using the solid circulation system and the solid circulation rate was ranged from 65 to 390 g/min. We also proposed two interconnenced fluidized beds system for selective solid circulation equipped with the developed solid separator and the solid circulation system. Long-term operation of continuous solid circulation up to 20 hours has been performed to check feasibility of stable operation. The pressure drop profiles in two beds and the solid separation rate were maintained steadily, and therefore, we could conclude that solid circulation was smooth and stable.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.411-414
• /
• 2008

본 논문에서는 $CO_2$ 분리용 활성탄의 표면분석 및 흡착속도를 비교하였다. TGA 방법에 의한 흡착속도 데이터를 획득함으로써 분리장치 설계를 위한 기초자료를 획득하였고, 흡착온도에 따른 결과는 흡착온도가 낮을수록, 흡착량이 증가하고 흡착속도 또한 더 빠름을 알 수 있었다.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.18-23
• /
• 1998

Theoretical model has been derived in the electrophoretic separation system where an electric potential is applied to the system in the axial direction. The effect of electrophoretic convection in the polymeric media is significantly contributed to separate large ionic-molecules because the conformation of large ionic-molecule quickly orients in the field direction. The dependence of the transport in the polymeric media upon field intensity and molecular size aids in understanding the transport of large ionic-molecule in the system, since the convective velocity of large ionic-molecule is accelerated inside a porous material. The separation of two different large ionic-molecules is predicted with a value of $(Pe_t/Pe_g)$ of individual large ionic-molecule using an operator and the reptation theories.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.3
• /
• pp.205-212
• /
• 2000

Experimental investigations on the removal of protein, total suspended solids and turbidity from aquacultural water were carried out by using three types of foam separator: counter current air driven type foam separator (CCADFS), high speed aeration type foam separator (HSAFS) and venturi type foam separator (VFS). The decrease of flow rate by CCADFS, HSAFS and VFS were $0.4,\;66.1,\;77.2 {\%}$ respectively. Protein removal rates by three types foam separator were decreased with the increased hydraulic residence time (HRT). Bellw 0.32 minute and 0.21 minute of hydraulic residence times, protein removal rate of HSAFS and YES was higher than that of CCADFS, respectively. Protein removal rate of VFS was lower than that of HSAFS at any HRT. As increasing the HRT, protein removal efficiency of CCADFS was increased, but that of HSAFS and VES were decreased. The changes of removal rates and efficiencies of total suspended solid and turbidity were similar to proteins.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.268-282
• /
• 2003

Pervaporation-facilitated esterification with slow reaction regime was characterized by using a practical model based on non-perfect separation through membrane. A non-perfect separation in which the membrane is not perfectly permselective to water was applied to the model. Thus, membrane selectivity and membrane capability to remove water were included in the simulation model to explain how they influence the membrane-facilitated reaction process and improve the reactor performance. It was shown by simulation that in the reaction systems with non-perfect separation, reaction completion can hardly be achievable when any reactant at initial molar ratio=1 or the less abundant reactant at initial molar ratio>1 permeates through membrane, and the permeation of ester accelerates the forward reaction md increase reaction conversion at any instant through removal of product species like water. The volume change causes concentrating both reactants and products that affect the reaction with time in opposite ways; reactant-concentrating effect is dominant during the initial stage of reaction, increasing the reaction rate, and then concentrating product influences more reaction by decreasing the reaction rate.